On 6.10.2022 11:57, Neil Armstrong wrote:
> Fix the MDM9615 DT to the expected subnodes namings.
>
> Signed-off-by: Neil Armstrong <neil.armstrong@xxxxxxxxxx>
> ---
Reviewed-by: Konrad Dybcio <konrad.dybcio@xxxxxxxxxxxxxx>
Konrad
> .../boot/dts/qcom-mdm9615-wp8548-mangoh-green.dts | 8 ++++----
> arch/arm/boot/dts/qcom-mdm9615-wp8548.dtsi | 22 +++++++++++-----------
> 2 files changed, 15 insertions(+), 15 deletions(-)
>
> diff --git a/arch/arm/boot/dts/qcom-mdm9615-wp8548-mangoh-green.dts b/arch/arm/boot/dts/qcom-mdm9615-wp8548-mangoh-green.dts
> index 4e53b3d70195..30a110984597 100644
> --- a/arch/arm/boot/dts/qcom-mdm9615-wp8548-mangoh-green.dts
> +++ b/arch/arm/boot/dts/qcom-mdm9615-wp8548-mangoh-green.dts
> @@ -45,8 +45,8 @@ &msmgpio {
> * - 42: IOT0_GPIO1 and SD Card Detect
> */
>
> - gpioext1_pins: gpioext1_pins {
> - pins {
> + gpioext1_pins: gpioext1-state {
> + gpioext1-pins {
> pins = "gpio2";
> function = "gpio";
> input-enable;
> @@ -54,8 +54,8 @@ pins {
> };
> };
>
> - sdc_cd_pins: sdc_cd_pins {
> - pins {
> + sdc_cd_pins: sdc-cd-state {
> + sdc-cd-pins {
> pins = "gpio42";
> function = "gpio";
> drive-strength = <2>;
> diff --git a/arch/arm/boot/dts/qcom-mdm9615-wp8548.dtsi b/arch/arm/boot/dts/qcom-mdm9615-wp8548.dtsi
> index 2fe8693dc3cd..92c8003dac25 100644
> --- a/arch/arm/boot/dts/qcom-mdm9615-wp8548.dtsi
> +++ b/arch/arm/boot/dts/qcom-mdm9615-wp8548.dtsi
> @@ -22,8 +22,8 @@ &msmgpio {
> pinctrl-0 = <&reset_out_pins>;
> pinctrl-names = "default";
>
> - gsbi3_pins: gsbi3_pins {
> - mux {
> + gsbi3_pins: gsbi3-state {
> + gsbi3-pins {
> pins = "gpio8", "gpio9", "gpio10", "gpio11";
> function = "gsbi3";
> drive-strength = <8>;
> @@ -31,8 +31,8 @@ mux {
> };
> };
>
> - gsbi4_pins: gsbi4_pins {
> - mux {
> + gsbi4_pins: gsbi4-state {
> + gsbi4-pins {
> pins = "gpio12", "gpio13", "gpio14", "gpio15";
> function = "gsbi4";
> drive-strength = <8>;
> @@ -40,15 +40,15 @@ mux {
> };
> };
>
> - gsbi5_i2c_pins: gsbi5_i2c_pins {
> - pin16 {
> + gsbi5_i2c_pins: gsbi5-i2c-state {
> + sda-pins {
> pins = "gpio16";
> function = "gsbi5_i2c";
> drive-strength = <8>;
> bias-disable;
> };
>
> - pin17 {
> + scl-pins {
> pins = "gpio17";
> function = "gsbi5_i2c";
> drive-strength = <2>;
> @@ -56,8 +56,8 @@ pin17 {
> };
> };
>
> - gsbi5_uart_pins: gsbi5_uart_pins {
> - mux {
> + gsbi5_uart_pins: gsbi5-uart-state {
> + gsbi5-uart-pins {
> pins = "gpio18", "gpio19";
> function = "gsbi5_uart";
> drive-strength = <8>;
> @@ -65,8 +65,8 @@ mux {
> };
> };
>
> - reset_out_pins: reset_out_pins {
> - pins {
> + reset_out_pins: reset-out-state {
> + reset-out-pins {
> pins = "gpio66";
> function = "gpio";
> drive-strength = <2>;
>
