Re: [RESEND PATCH v3 4/4] leds: Add a multicolor LED driver to group monochromatic LEDs

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




On 18/09/2022 16:54, Jacek Anaszewski wrote:
Hi Jean,

General question to this driver: since it seems that it is allowed to
have duplicate LEDs of the same color, then it will be impossible to
distinguish which of the two same colors in multi_index file will refer
to which physical LED. Are you aware of this shortcoming?

Hi Jacek,

yes I'm aware of this, but I don't think it can be a problem in a real environment. There will probably few cases were multiple leds of the same color are used and even fewer were those leds need to be controlled differently.


Besides that I have two remarks below.

On 9/17/22 10:13, Jean-Jacques Hiblot wrote:
By allowing to group multiple monochrome LED into multicolor LEDs,
all involved LEDs can be controlled in-sync. This enables using effects
using triggers, etc.

Signed-off-by: Jean-Jacques Hiblot <jjhiblot@xxxxxxxxxxxxxxx>
---
  drivers/leds/rgb/Kconfig                 |   6 +
  drivers/leds/rgb/Makefile                |   1 +
  drivers/leds/rgb/leds-group-multicolor.c | 153 +++++++++++++++++++++++
  3 files changed, 160 insertions(+)
  create mode 100644 drivers/leds/rgb/leds-group-multicolor.c

diff --git a/drivers/leds/rgb/Kconfig b/drivers/leds/rgb/Kconfig
index 204cf470beae..c2610c47a82d 100644
--- a/drivers/leds/rgb/Kconfig
+++ b/drivers/leds/rgb/Kconfig
@@ -2,6 +2,12 @@
    if LEDS_CLASS_MULTICOLOR
  +config LEDS_GRP_MULTICOLOR
+    tristate "Multi-color LED grouping support"
+    help
+      This option enables support for monochrome LEDs that are
+      grouped into multicolor LEDs.
+
  config LEDS_PWM_MULTICOLOR
      tristate "PWM driven multi-color LED Support"
      depends on PWM
diff --git a/drivers/leds/rgb/Makefile b/drivers/leds/rgb/Makefile
index 0675bc0f6e18..4de087ad79bc 100644
--- a/drivers/leds/rgb/Makefile
+++ b/drivers/leds/rgb/Makefile
@@ -1,4 +1,5 @@
  # SPDX-License-Identifier: GPL-2.0
  +obj-$(CONFIG_LEDS_GRP_MULTICOLOR)    += leds-group-multicolor.o
  obj-$(CONFIG_LEDS_PWM_MULTICOLOR)    += leds-pwm-multicolor.o
  obj-$(CONFIG_LEDS_QCOM_LPG)        += leds-qcom-lpg.o
diff --git a/drivers/leds/rgb/leds-group-multicolor.c b/drivers/leds/rgb/leds-group-multicolor.c
new file mode 100644
index 000000000000..61f9e1954fc4
--- /dev/null
+++ b/drivers/leds/rgb/leds-group-multicolor.c
@@ -0,0 +1,153 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * multi-color LED built with monochromatic LED devices
+ *
+ * Copyright 2022 Jean-Jacques Hiblot <jjhiblot@xxxxxxxxxxxxxxx>
+ */
+
+#include <linux/err.h>
+#include <linux/leds.h>
+#include <linux/led-class-multicolor.h>
+#include <linux/math.h>
+#include <linux/module.h>
+#include <linux/mod_devicetable.h>
+#include <linux/platform_device.h>
+#include <linux/property.h>
+
+struct led_mcg_priv {
+    struct led_classdev_mc mc_cdev;
+    struct led_classdev **monochromatics;
+};
+
+static int led_mcg_set(struct led_classdev *cdev,
+              enum led_brightness brightness)
+{
+    struct led_classdev_mc *mc_cdev = lcdev_to_mccdev(cdev);
+    struct led_mcg_priv *priv =
+        container_of(mc_cdev, struct led_mcg_priv, mc_cdev);
+    int i;
+
+    led_mc_calc_color_components(mc_cdev, brightness);
+
+    for (i = 0; i < mc_cdev->num_colors; i++) {
+        struct led_classdev *mono = priv->monochromatics[i];
+        int actual_led_brightness;
+
+        /*
+         * Scale the intensity according the max brightness of the
+         * monochromatic LED
s/according the/according to the/

+         */
+        actual_led_brightness = DIV_ROUND_CLOSEST(
+            mono->max_brightness * mc_cdev->subled_info[i].brightness,
+            mc_cdev->led_cdev.max_brightness);

How about dropping above usage of led_mc_calc_color_components()
helper in favour of doing all required calculations here?
It would be easier for the reader to grasp the idea then.


+
+        led_set_brightness(mono, actual_led_brightness);
+    }
+
+    return 0;
+}
+
+static int led_mcg_probe(struct platform_device *pdev)
+{
+    struct device *dev = &pdev->dev;
+    struct led_init_data init_data = {};
+    struct led_classdev *cdev;
+    struct mc_subled *subled;
+    struct led_mcg_priv *priv;
+    int i, count, ret;
+    unsigned int max_brightness;
+
+    priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
+    if (!priv)
+        return -ENOMEM;
+
+    count = 0;
+    max_brightness = 0;
+    for (;;) {
+        struct led_classdev *led_cdev;
+
+        led_cdev = devm_of_led_get(dev, count);
+        if (IS_ERR(led_cdev)) {
+            /* Reached the end of the list ? */
+            if (PTR_ERR(led_cdev) == -ENOENT)
+                break;
+            return dev_err_probe(dev, PTR_ERR(led_cdev),
+                         "Unable to get led #%d", count);
+        }
+        count++;
+
+        priv->monochromatics = devm_krealloc(dev, priv->monochromatics,
+                    count * sizeof(*priv->monochromatics),
+                    GFP_KERNEL);
+        if (!priv->monochromatics)
+            return -ENOMEM;
+
+        priv->monochromatics[count - 1] = led_cdev;
+
+        max_brightness = max(max_brightness, led_cdev->max_brightness);
+    }
+
+    subled = devm_kzalloc(dev, count * sizeof(*subled), GFP_KERNEL);
+    if (!subled)
+        return -ENOMEM;
+    priv->mc_cdev.subled_info = subled;
+
+    for (i = 0; i < count; i++) {
+        struct led_classdev *led_cdev = priv->monochromatics[i];
+
+        subled[i].color_index = led_cdev->color;
+        /* configure the LED intensity to its maximum */
+        subled[i].intensity = max_brightness;
+    }
+
+    /* init the multicolor's LED class device */
+    cdev = &priv->mc_cdev.led_cdev;
+    cdev->flags = LED_CORE_SUSPENDRESUME;
+    cdev->brightness_set_blocking = led_mcg_set;
+    cdev->max_brightness = max_brightness;
+    cdev->color = LED_COLOR_ID_MULTI;
+    priv->mc_cdev.num_colors = count;
+
+    init_data.fwnode = dev_fwnode(dev);
+    ret = devm_led_classdev_multicolor_register_ext(dev, &priv->mc_cdev,
+                            &init_data);
+    if (ret)
+        return dev_err_probe(dev, ret,
+            "failed to register multicolor led for %s.\n",
+            cdev->name);
+
+    ret = led_mcg_set(cdev, cdev->brightness);
+    if (ret)
+        return dev_err_probe(dev, ret,
+                     "failed to set led value for %s.",
+                     cdev->name);
+
+    for (i = 0; i < count; i++) {
+        struct led_classdev *led_cdev = priv->monochromatics[i];
+
+        /* Make the sysfs of the monochromatic LED read-only */
+        led_cdev->flags |= LED_SYSFS_DISABLE;
+    }
+
+    return 0;
+}
+
+static const struct of_device_id of_led_mcg_match[] = {
+    { .compatible = "leds-group-multicolor" },
+    {}
+};
+MODULE_DEVICE_TABLE(of, of_led_mcg_match);
+
+static struct platform_driver led_mcg_driver = {
+    .probe        = led_mcg_probe,
+    .driver        = {
+        .name    = "leds_group_multicolor",
+        .of_match_table = of_led_mcg_match,
+    }
+};
+module_platform_driver(led_mcg_driver);
+
+MODULE_AUTHOR("Jean-Jacques Hiblot <jjhiblot@xxxxxxxxxxxxxxx>");
+MODULE_DESCRIPTION("multi-color LED group driver");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:leds-group-multicolor");




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux