Add -regulator suffix to regulator names on Radxa ROCK3 Model A
board. This makes the naming more consistent.
Signed-off-by: Chukun Pan <amadeus@xxxxxxxxxx>
Acked-by: Michael Riesch <michael.riesch@xxxxxxxxxxxxxx>
---
arch/arm64/boot/dts/rockchip/rk3568-rock-3a.dts | 14 +++++++-------
1 file changed, 7 insertions(+), 7 deletions(-)
diff --git a/arch/arm64/boot/dts/rockchip/rk3568-rock-3a.dts b/arch/arm64/boot/dts/rockchip/rk3568-rock-3a.dts
index fb87a168fe96..8adf672709e8 100644
--- a/arch/arm64/boot/dts/rockchip/rk3568-rock-3a.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3568-rock-3a.dts
@@ -60,7 +60,7 @@ simple-audio-card,codec {
};
};
- vcc12v_dcin: vcc12v-dcin {
+ vcc12v_dcin: vcc12v-dcin-regulator {
compatible = "regulator-fixed";
regulator-name = "vcc12v_dcin";
regulator-always-on;
@@ -79,7 +79,7 @@ vcc3v3_pcie: vcc3v3-pcie-regulator {
vin-supply = <&vcc5v0_sys>;
};
- vcc3v3_sys: vcc3v3-sys {
+ vcc3v3_sys: vcc3v3-sys-regulator {
compatible = "regulator-fixed";
regulator-name = "vcc3v3_sys";
regulator-always-on;
@@ -89,7 +89,7 @@ vcc3v3_sys: vcc3v3-sys {
vin-supply = <&vcc12v_dcin>;
};
- vcc5v0_sys: vcc5v0-sys {
+ vcc5v0_sys: vcc5v0-sys-regulator {
compatible = "regulator-fixed";
regulator-name = "vcc5v0_sys";
regulator-always-on;
@@ -99,7 +99,7 @@ vcc5v0_sys: vcc5v0-sys {
vin-supply = <&vcc12v_dcin>;
};
- vcc5v0_usb: vcc5v0-usb {
+ vcc5v0_usb: vcc5v0-usb-regulator {
compatible = "regulator-fixed";
regulator-name = "vcc5v0_usb";
regulator-always-on;
@@ -109,7 +109,7 @@ vcc5v0_usb: vcc5v0-usb {
vin-supply = <&vcc12v_dcin>;
};
- vcc5v0_usb_host: vcc5v0-usb-host {
+ vcc5v0_usb_host: vcc5v0-usb-host-regulator {
compatible = "regulator-fixed";
enable-active-high;
gpio = <&gpio0 RK_PA6 GPIO_ACTIVE_HIGH>;
@@ -144,7 +144,7 @@ vcc5v0_usb_otg: vcc5v0-usb-otg-regulator {
vin-supply = <&vcc5v0_usb>;
};
- vcc_cam: vcc-cam {
+ vcc_cam: vcc-cam-regulator {
compatible = "regulator-fixed";
enable-active-high;
gpio = <&gpio1 RK_PB1 GPIO_ACTIVE_HIGH>;
@@ -160,7 +160,7 @@ regulator-state-mem {
};
};
- vcc_mipi: vcc-mipi {
+ vcc_mipi: vcc-mipi-regulator {
compatible = "regulator-fixed";
enable-active-high;
gpio = <&gpio3 RK_PC0 GPIO_ACTIVE_HIGH>;
--
2.25.1
