Convert Qualcomm SM8150 pin controller bindings to DT schema. Keep the
parsing of pin configuration subnodes consistent with other Qualcomm
schemas (children named with '-state' suffix, their children with
'-pins').
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
---
.../bindings/pinctrl/qcom,sm8150-pinctrl.txt | 190 ------------------
.../bindings/pinctrl/qcom,sm8150-pinctrl.yaml | 178 ++++++++++++++++
2 files changed, 178 insertions(+), 190 deletions(-)
delete mode 100644 Documentation/devicetree/bindings/pinctrl/qcom,sm8150-pinctrl.txt
create mode 100644 Documentation/devicetree/bindings/pinctrl/qcom,sm8150-pinctrl.yaml
diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,sm8150-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/qcom,sm8150-pinctrl.txt
deleted file mode 100644
index fa37733e5102..000000000000
--- a/Documentation/devicetree/bindings/pinctrl/qcom,sm8150-pinctrl.txt
+++ /dev/null
@@ -1,190 +0,0 @@
-Qualcomm SM8150 TLMM block
-
-This binding describes the Top Level Mode Multiplexer block found in the
-QCS404 platform.
-
-- compatible:
- Usage: required
- Value type: <string>
- Definition: must be "qcom,sm8150-pinctrl"
-
-- reg:
- Usage: required
- Value type: <prop-encoded-array>
- Definition: the base address and size of the north, south, west
- and east TLMM tiles.
-
-- reg-names:
- Usage: required
- Value type: <prop-encoded-array>
- Defintiion: names for the cells of reg, must contain "north", "south"
- "west" and "east".
-
-- interrupts:
- Usage: required
- Value type: <prop-encoded-array>
- Definition: should specify the TLMM summary IRQ.
-
-- interrupt-controller:
- Usage: required
- Value type: <none>
- Definition: identifies this node as an interrupt controller
-
-- #interrupt-cells:
- Usage: required
- Value type: <u32>
- Definition: must be 2. Specifying the pin number and flags, as defined
- in <dt-bindings/interrupt-controller/irq.h>
-
-- gpio-controller:
- Usage: required
- Value type: <none>
- Definition: identifies this node as a gpio controller
-
-- #gpio-cells:
- Usage: required
- Value type: <u32>
- Definition: must be 2. Specifying the pin number and flags, as defined
- in <dt-bindings/gpio/gpio.h>
-
-- gpio-ranges:
- Usage: required
- Value type: <prop-encoded-array>
- Definition: see ../gpio/gpio.txt
-
-- gpio-reserved-ranges:
- Usage: optional
- Value type: <prop-encoded-array>
- Definition: see ../gpio/gpio.txt
-
-Please refer to ../gpio/gpio.txt and ../interrupt-controller/interrupts.txt for
-a general description of GPIO and interrupt bindings.
-
-Please refer to pinctrl-bindings.txt in this directory for details of the
-common pinctrl bindings used by client devices, including the meaning of the
-phrase "pin configuration node".
-
-The pin configuration nodes act as a container for an arbitrary number of
-subnodes. Each of these subnodes represents some desired configuration for a
-pin, a group, or a list of pins or groups. This configuration can include the
-mux function to select on those pin(s)/group(s), and various pin configuration
-parameters, such as pull-up, drive strength, etc.
-
-
-PIN CONFIGURATION NODES:
-
-The name of each subnode is not important; all subnodes should be enumerated
-and processed purely based on their content.
-
-Each subnode only affects those parameters that are explicitly listed. In
-other words, a subnode that lists a mux function but no pin configuration
-parameters implies no information about any pin configuration parameters.
-Similarly, a pin subnode that describes a pullup parameter implies no
-information about e.g. the mux function.
-
-
-The following generic properties as defined in pinctrl-bindings.txt are valid
-to specify in a pin configuration subnode:
-
-- pins:
- Usage: required
- Value type: <string-array>
- Definition: List of gpio pins affected by the properties specified in
- this subnode.
-
- Valid pins are:
- gpio0-gpio149
- Supports mux, bias and drive-strength
-
- sdc1_clk, sdc1_cmd, sdc1_data sdc2_clk, sdc2_cmd,
- sdc2_data sdc1_rclk
- Supports bias and drive-strength
-
- ufs_reset
- Supports bias and drive-strength
-
-- function:
- Usage: required
- Value type: <string>
- Definition: Specify the alternative function to be configured for the
- specified pins. Functions are only valid for gpio pins.
- Valid values are:
-
- adsp_ext, agera_pll, aoss_cti, ddr_pxi2, atest_char,
- atest_char0, atest_char1, atest_char2, atest_char3,
- audio_ref, atest_usb1, atest_usb2, atest_usb10,
- atest_usb11, atest_usb12, atest_usb13, atest_usb20,
- atest_usb21, atest_usb22, atest_usb2, atest_usb23,
- btfm_slimbus, cam_mclk, cci_async, cci_i2c, cci_timer0,
- cci_timer1, cci_timer2, cci_timer3, cci_timer4,
- cri_trng, cri_trng0, cri_trng1, dbg_out, ddr_bist,
- ddr_pxi0, ddr_pxi1, ddr_pxi3, edp_hot, edp_lcd,
- emac_phy, emac_pps, gcc_gp1, gcc_gp2, gcc_gp3, gpio,
- hs1_mi2s, hs2_mi2s, hs3_mi2s, jitter_bist,
- lpass_slimbus, mdp_vsync, mdp_vsync0, mdp_vsync1,
- mdp_vsync2, mdp_vsync3, mss_lte, m_voc, nav_pps,
- pa_indicator, pci_e0, phase_flag, pll_bypassnl,
- pll_bist, pci_e1, pll_reset, pri_mi2s, pri_mi2s_ws,
- prng_rosc, qdss, qdss_cti, qlink_request, qlink_enable,
- qspi0, qspi1, qspi2, qspi3, qspi_clk, qspi_cs, qua_mi2s,
- qup0, qup1, qup2, qup3, qup4, qup5, qup6, qup7, qup8,
- qup9, qup10, qup11, qup12, qup13, qup14, qup15, qup16,
- qup17, qup18, qup19, qup_l4, qup_l5, qup_l6, rgmii,
- sdc4, sd_write, sec_mi2s, spkr_i2s, sp_cmu, ter_mi2s,
- tgu_ch0, tgu_ch1, tgu_ch2, tgu_ch3, tsense_pwm1,
- tsense_pwm2, tsif1, tsif2, uim1, uim2, uim_batt,
- usb2phy_ac, usb_phy, vfr_1, vsense_trigger, wlan1_adc0,
- wlan1_adc1, wlan2_adc0, wlan2_adc1, wmss_reset
-
-- bias-disable:
- Usage: optional
- Value type: <none>
- Definition: The specified pins should be configued as no pull.
-
-- bias-pull-down:
- Usage: optional
- Value type: <none>
- Definition: The specified pins should be configued as pull down.
-
-- bias-pull-up:
- Usage: optional
- Value type: <none>
- Definition: The specified pins should be configued as pull up.
-
-- output-high:
- Usage: optional
- Value type: <none>
- Definition: The specified pins are configured in output mode, driven
- high.
- Not valid for sdc pins.
-
-- output-low:
- Usage: optional
- Value type: <none>
- Definition: The specified pins are configured in output mode, driven
- low.
- Not valid for sdc pins.
-
-- drive-strength:
- Usage: optional
- Value type: <u32>
- Definition: Selects the drive strength for the specified pins, in mA.
- Valid values are: 2, 4, 6, 8, 10, 12, 14 and 16
-
-Example:
-
- tlmm: pinctrl@3000000 {
- compatible = "qcom,sm8150-pinctrl";
- reg = <0x03100000 0x300000>,
- <0x03500000 0x300000>,
- <0x03900000 0x300000>,
- <0x03D00000 0x300000>;
- reg-names = "west", "east", "north", "south";
- interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
- gpio-controller;
- #gpio-cells = <2>;
- gpio-ranges = <&tlmm 0 0 175>;
- gpio-reserved-ranges = <0 4>, <126 4>;
- interrupt-controller;
- #interrupt-cells = <2>;
- };
diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,sm8150-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,sm8150-pinctrl.yaml
new file mode 100644
index 000000000000..41066d88dc57
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/qcom,sm8150-pinctrl.yaml
@@ -0,0 +1,178 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/qcom,sm8150-pinctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm SM8150 TLMM pin controller
+
+maintainers:
+ - Bjorn Andersson <andersson@xxxxxxxxxx>
+ - Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
+
+description:
+ Top Level Mode Multiplexer pin controller in Qualcomm SM8150 SoC.
+
+properties:
+ compatible:
+ const: qcom,sm8150-pinctrl
+
+ reg:
+ maxItems: 4
+
+ reg-names:
+ items:
+ - const: west
+ - const: east
+ - const: north
+ - const: south
+
+ interrupts: true
+ interrupt-controller: true
+ "#interrupt-cells": true
+ gpio-controller: true
+ "#gpio-cells": true
+ gpio-ranges: true
+ wakeup-parent: true
+
+ gpio-reserved-ranges:
+ minItems: 1
+ maxItems: 88
+
+ gpio-line-names:
+ maxItems: 175
+
+patternProperties:
+ "-state$":
+ oneOf:
+ - $ref: "#/$defs/qcom-sm8150-tlmm-state"
+ - patternProperties:
+ "-pins$":
+ $ref: "#/$defs/qcom-sm8150-tlmm-state"
+ additionalProperties: false
+
+$defs:
+ qcom-sm8150-tlmm-state:
+ type: object
+ description:
+ Pinctrl node's client devices use subnodes for desired pin configuration.
+ Client device subnodes use below standard properties.
+ $ref: qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state
+
+ properties:
+ pins:
+ description:
+ List of gpio pins affected by the properties specified in this
+ subnode.
+ items:
+ oneOf:
+ - pattern: "^gpio([0-9]|[1-9][0-9]|1[0-6][0-9]|17[0-4])$"
+ - enum: [ sdc2_clk, sdc2_cmd, sdc2_data, ufs_reset ]
+ minItems: 1
+ maxItems: 36
+
+ function:
+ description:
+ Specify the alternative function to be configured for the specified
+ pins.
+
+ enum: [ adsp_ext, agera_pll, aoss_cti, ddr_pxi2, atest_char,
+ atest_char0, atest_char1, atest_char2, atest_char3, audio_ref,
+ atest_usb1, atest_usb2, atest_usb10, atest_usb11, atest_usb12,
+ atest_usb13, atest_usb20, atest_usb21, atest_usb22, atest_usb2,
+ atest_usb23, btfm_slimbus, cam_mclk, cci_async, cci_i2c,
+ cci_timer0, cci_timer1, cci_timer2, cci_timer3, cci_timer4,
+ cri_trng, cri_trng0, cri_trng1, dbg_out, ddr_bist, ddr_pxi0,
+ ddr_pxi1, ddr_pxi3, edp_hot, edp_lcd, emac_phy, emac_pps,
+ gcc_gp1, gcc_gp2, gcc_gp3, gpio, hs1_mi2s, hs2_mi2s, hs3_mi2s,
+ jitter_bist, lpass_slimbus, mdp_vsync, mdp_vsync0, mdp_vsync1,
+ mdp_vsync2, mdp_vsync3, mss_lte, m_voc, nav_pps, pa_indicator,
+ pci_e0, phase_flag, pll_bypassnl, pll_bist, pci_e1, pll_reset,
+ pri_mi2s, pri_mi2s_ws, prng_rosc, qdss, qdss_cti,
+ qlink_request, qlink_enable, qspi0, qspi1, qspi2, qspi3,
+ qspi_clk, qspi_cs, qua_mi2s, qup0, qup1, qup2, qup3, qup4,
+ qup5, qup6, qup7, qup8, qup9, qup10, qup11, qup12, qup13,
+ qup14, qup15, qup16, qup17, qup18, qup19, qup_l4, qup_l5,
+ qup_l6, rgmii, sdc4, sd_write, sec_mi2s, spkr_i2s, sp_cmu,
+ ter_mi2s, tgu_ch0, tgu_ch1, tgu_ch2, tgu_ch3, tsense_pwm1,
+ tsense_pwm2, tsif1, tsif2, uim1, uim2, uim_batt, usb2phy_ac,
+ usb_phy, vfr_1, vsense_trigger, wlan1_adc0, wlan1_adc1,
+ wlan2_adc0, wlan2_adc1, wmss_reset ]
+
+ drive-strength:
+ enum: [2, 4, 6, 8, 10, 12, 14, 16]
+ default: 2
+ description:
+ Selects the drive strength for the specified pins, in mA.
+
+ bias-pull-down: true
+ bias-pull-up: true
+ bias-disable: true
+ input-enable: true
+ output-high: true
+ output-low: true
+
+ required:
+ - pins
+
+ additionalProperties: false
+
+allOf:
+ - $ref: /schemas/pinctrl/qcom,tlmm-common.yaml#
+
+required:
+ - compatible
+ - reg
+ - reg-names
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+ tlmm: pinctrl@3100000 {
+ compatible = "qcom,sm8150-pinctrl";
+ reg = <0x03100000 0x300000>,
+ <0x03500000 0x300000>,
+ <0x03900000 0x300000>,
+ <0x03d00000 0x300000>;
+ reg-names = "west", "east", "north", "south";
+ interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
+ gpio-ranges = <&tlmm 0 0 176>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ wakeup-parent = <&pdc>;
+
+ qup-spi0-default-state {
+ pins = "gpio0", "gpio1", "gpio2", "gpio3";
+ function = "qup0";
+ drive-strength = <6>;
+ bias-disable;
+ };
+
+ pcie1-default-state {
+ perst-pins {
+ pins = "gpio102";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-pull-down;
+ };
+
+ clkreq-pins {
+ pins = "gpio103";
+ function = "pci_e1";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+
+ wake-pins {
+ pins = "gpio104";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+ };
+ };
--
2.34.1
