As noted, the clock-rate when not a nice multiple of ns is probably going to end up with inacurate caculations, as well as on a non pci system the rate may change (although we've not put a clock rate change notifier in this code yet) so we also add some quick checks of the rate when we do any calculations with it. Signed-off-by; Ben Dooks <ben.dooks@xxxxxxxxxx> Reported-by: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx> --- drivers/pwm/pwm-dwc-of.c | 2 +- drivers/pwm/pwm-dwc.c | 29 ++++++++++++++++++++--------- drivers/pwm/pwm-dwc.h | 2 +- 3 files changed, 22 insertions(+), 11 deletions(-) diff --git a/drivers/pwm/pwm-dwc-of.c b/drivers/pwm/pwm-dwc-of.c index c5b4351cc7b0..5f7f066859d4 100644 --- a/drivers/pwm/pwm-dwc-of.c +++ b/drivers/pwm/pwm-dwc-of.c @@ -50,7 +50,7 @@ static int dwc_pwm_plat_probe(struct platform_device *pdev) return dev_err_probe(dev, PTR_ERR(dwc->clk), "failed to get timer clock\n"); - dwc->clk_ns = NSEC_PER_SEC / clk_get_rate(dwc->clk); + dwc->clk_rate = clk_get_rate(dwc->clk); return devm_pwmchip_add(dev, &dwc->chip); } diff --git a/drivers/pwm/pwm-dwc.c b/drivers/pwm/pwm-dwc.c index 5ef0fe7ea3e9..f48a6245a3b5 100644 --- a/drivers/pwm/pwm-dwc.c +++ b/drivers/pwm/pwm-dwc.c @@ -43,18 +43,22 @@ static int __dwc_pwm_configure_timer(struct dwc_pwm *dwc, u32 high; u32 low; + if (dwc->clk) + dwc->clk_rate = clk_get_rate(dwc->clk); + /* * Calculate width of low and high period in terms of input clock * periods and check are the result within HW limits between 1 and * 2^32 periods. */ - tmp = DIV_ROUND_CLOSEST_ULL(state->duty_cycle, dwc->clk_ns); + tmp = state->duty_cycle * dwc->clk_rate; + tmp = DIV_ROUND_CLOSEST_ULL(tmp, NSEC_PER_SEC); if (tmp < 1 || tmp > (1ULL << 32)) return -ERANGE; low = tmp - 1; - tmp = DIV_ROUND_CLOSEST_ULL(state->period - state->duty_cycle, - dwc->clk_ns); + tmp = (state->period - state->duty_cycle) * dwc->clk_rate; + tmp = DIV_ROUND_CLOSEST_ULL(tmp, NSEC_PER_SEC); if (tmp < 1 || tmp > (1ULL << 32)) return -ERANGE; high = tmp - 1; @@ -120,6 +124,7 @@ static void dwc_pwm_get_state(struct pwm_chip *chip, struct pwm_device *pwm, struct pwm_state *state) { struct dwc_pwm *dwc = to_dwc_pwm(chip); + unsigned long clk_rate; u64 duty, period; u32 ctrl, ld, ld2; @@ -129,22 +134,28 @@ static void dwc_pwm_get_state(struct pwm_chip *chip, struct pwm_device *pwm, ld = dwc_pwm_readl(dwc, DWC_TIM_LD_CNT(pwm->hwpwm)); ld2 = dwc_pwm_readl(dwc, DWC_TIM_LD_CNT2(pwm->hwpwm)); + if (dwc->clk) + dwc->clk_rate = clk_get_rate(dwc->clk); + + clk_rate = dwc->clk_rate; state->enabled = !!(ctrl & DWC_TIM_CTRL_EN); /* If we're not in PWM, technically the output is a 50-50 * based on the timer load-count only. */ if (ctrl & DWC_TIM_CTRL_PWM) { - duty = (ld + 1) * dwc->clk_ns; - period = (ld2 + 1) * dwc->clk_ns; + duty = ld + 1; + period = ld2 + 1; period += duty; } else { - duty = (ld + 1) * dwc->clk_ns; + duty = ld + 1; period = duty * 2; } - state->period = period; - state->duty_cycle = duty; + duty *= NSEC_PER_SEC; + period *= NSEC_PER_SEC; + state->period = DIV_ROUND_CLOSEST_ULL(period, clk_rate); + state->duty_cycle = DIV_ROUND_CLOSEST_ULL(duty, clk_rate); state->polarity = PWM_POLARITY_INVERSED; pm_runtime_put_sync(chip->dev); @@ -164,7 +175,7 @@ struct dwc_pwm *dwc_pwm_alloc(struct device *dev) if (!dwc) return NULL; - dwc->clk_ns = 10; + dwc->clk_rate = NSEC_PER_SEC / 10; dwc->chip.dev = dev; dwc->chip.ops = &dwc_pwm_ops; dwc->chip.npwm = DWC_TIMERS_TOTAL; diff --git a/drivers/pwm/pwm-dwc.h b/drivers/pwm/pwm-dwc.h index dc451cb2eff5..19bdc2224690 100644 --- a/drivers/pwm/pwm-dwc.h +++ b/drivers/pwm/pwm-dwc.h @@ -41,7 +41,7 @@ struct dwc_pwm { struct pwm_chip chip; void __iomem *base; struct clk *clk; - unsigned int clk_ns; + unsigned long clk_rate; struct dwc_pwm_ctx ctx[DWC_TIMERS_TOTAL]; }; #define to_dwc_pwm(p) (container_of((p), struct dwc_pwm, chip)) -- 2.35.1