[PATCH v7 2/2] dt-bindings: memory-controllers: gpmc-child: add wait-pin polarity

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



From: Benedikt Niedermayr <benedikt.niedermayr@xxxxxxxxxxx>

The GPMC controller has the ability to configure the polarity for the
wait pin. The current properties do not allow this configuration.
This binding directly configures the WAITPIN<X>POLARITY bit
in the GPMC_CONFIG register by setting the "ti,wait-pin-polarity"
dt-property.

Signed-off-by: Benedikt Niedermayr <benedikt.niedermayr@xxxxxxxxxxx>
---
 .../bindings/memory-controllers/ti,gpmc-child.yaml         | 7 +++++++
 1 file changed, 7 insertions(+)

diff --git a/Documentation/devicetree/bindings/memory-controllers/ti,gpmc-child.yaml b/Documentation/devicetree/bindings/memory-controllers/ti,gpmc-child.yaml
index 6e3995bb1630..4a257fac577e 100644
--- a/Documentation/devicetree/bindings/memory-controllers/ti,gpmc-child.yaml
+++ b/Documentation/devicetree/bindings/memory-controllers/ti,gpmc-child.yaml
@@ -230,6 +230,13 @@ properties:
       Wait-pin used by client. Must be less than "gpmc,num-waitpins".
     $ref: /schemas/types.yaml#/definitions/uint32
 
+  ti,wait-pin-polarity:
+    description: |
+      Set the desired polarity for the selected wait pin.
+      0 for active low, 1 for active high.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [0, 1]
+
   gpmc,wait-on-read:
     description: Enables wait monitoring on reads.
     type: boolean
-- 
2.25.1




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux