On Wed, Oct 05, 2022 at 01:35:15PM +0200, AngeloGioacchino Del Regno wrote: > Convert the MediaTek watchdog bindings to schema. > > Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@xxxxxxxxxxxxx> > --- > .../bindings/watchdog/mediatek,mtk-wdt.yaml | 80 +++++++++++++++++++ > .../devicetree/bindings/watchdog/mtk-wdt.txt | 42 ---------- > 2 files changed, 80 insertions(+), 42 deletions(-) > create mode 100644 Documentation/devicetree/bindings/watchdog/mediatek,mtk-wdt.yaml > delete mode 100644 Documentation/devicetree/bindings/watchdog/mtk-wdt.txt > > diff --git a/Documentation/devicetree/bindings/watchdog/mediatek,mtk-wdt.yaml b/Documentation/devicetree/bindings/watchdog/mediatek,mtk-wdt.yaml > new file mode 100644 > index 000000000000..f43b5af92d40 > --- /dev/null > +++ b/Documentation/devicetree/bindings/watchdog/mediatek,mtk-wdt.yaml > @@ -0,0 +1,80 @@ > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) > +%YAML 1.2 > +--- > +$id: http://devicetree.org/schemas/watchdog/mediatek,mtk-wdt.yaml# > +$schema: http://devicetree.org/meta-schemas/core.yaml# > + > +title: MediaTek SoCs Watchdog timer > + > +maintainers: > + - Matthias Brugger <matthias.bgg@xxxxxxxxx> > + > +description: > + The watchdog supports a pre-timeout interrupt that fires > + timeout-sec/2 before the expiry. > + > +allOf: > + - $ref: watchdog.yaml# > + > +properties: > + compatible: > + oneOf: > + - items: > + - enum: > + - mediatek,mt2712-wdt > + - mediatek,mt6589-wdt > + - mediatek,mt7986-wdt > + - mediatek,mt8183-wdt > + - mediatek,mt8186-wdt > + - mediatek,mt8192-wdt > + - mediatek,mt8195-wdt The original binding only had 4 without a fallback. It's fine to add or change, but note the changes in the commit msg. Are all of these really each unique and not the same? > + - items: > + - enum: > + - mediatek,mt2701-wdt > + - mediatek,mt6582-wdt > + - mediatek,mt6797-wdt > + - mediatek,mt7622-wdt > + - mediatek,mt7623-wdt > + - mediatek,mt7629-wdt > + - mediatek,mt8516-wdt > + - const: mediatek,mt6589-wdt > + > + reg: > + maxItems: 1 > + > + interrupts: > + items: > + - description: Watchdog pre-timeout (bark) interrupt > + > + mediatek,disable-extrst: > + description: Disable sending output reset signal > + type: boolean > + > + timeout-sec: true Drop this and use 'unevaluatedProperties'. > + > + '#reset-cells': > + const: 1 > + > +required: > + - compatible > + - reg > + > +additionalProperties: false > + > +examples: > + - | > + #include <dt-bindings/interrupt-controller/arm-gic.h> > + > + soc { > + #address-cells = <2>; > + #size-cells = <2>; > + > + watchdog: watchdog@10007000 { > + compatible = "mediatek,mt8183-wdt"; > + reg = <0 0x10007000 0 0x100>; > + interrupts = <GIC_SPI 139 IRQ_TYPE_LEVEL_LOW>; > + mediatek,disable-extrst; > + timeout-sec = <10>; > + #reset-cells = <1>; > + }; > + };