From: ChiaEn Wu <chiaen_wu@xxxxxxxxxxx> This patch series add MediaTek MT6370 PMIC support and add a index macro to <linear_range.h>. The MT6370 is a highly-integrated smart power management IC, which includes a single cell Li-Ion/Li-Polymer switching battery charger, a USB Type-C & Power Delivery (PD) controller, dual Flash LED current sources, a RGB LED driver, a backlight WLED driver, a display bias driver and a general LDO for portable devices. First, in this series of patches, - 'dt-binding: mfd' and 'mfd driver' have been applied by Lee in the v7. https://lore.kernel.org/all/YvJdpq0MWNPQZw5c@xxxxxxxxxx/ https://lore.kernel.org/all/YvJdxEpC2cB58Bq9@xxxxxxxxxx/ - 'tcpci driver' has been applied by Greg in the v8. https://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb.git/commit/?h=usb-next&id=c2a8ea5997fdfeb43eda259d5533234c3cae05d7 - 'dt-binding: backlight' and 'backlight driver' have been applied by Lee in v9. https://lore.kernel.org/all/YxYSDSlnOELL2mPF@xxxxxxxxxx/ https://lore.kernel.org/all/YxYS7%2FdZI69lMXeh@xxxxxxxxxx/ - 'dt-binding: charger', 'charger driver' and 'linear_range.h' patch have been applied by Sebastian in v11. https://lore.kernel.org/all/20220920160857.6qfi66gtmgwesq7g@xxxxxxxxxxxxxxxxxxxxxx/ https://lore.kernel.org/all/20220920161218.dkkfvfomrruebahi@xxxxxxxxxxxxxxxxxxxxxx/ https://lore.kernel.org/all/20220920161238.dswtmyon462324dm@xxxxxxxxxxxxxxxxxxxxxx/ Second, the LED RGB driver is based on Andy's patch which moves led_init_default_state_get() to the global header. https://lore.kernel.org/all/20220805154907.32263-3-andriy.shevchenko@xxxxxxxxxxxxxxx/ Third, the Patch 3/5 (MT6370 ADC Drvier) depends on unmerged 'dt-binding:mfd' patch. In addition, we made some changes for MT6370 LED indicator dt-binding (see v13 section of the change log below). Thank you, ChiaEn Wu --- Change in v13: - In Patch 1/5 (dt-bindings: MT6370 LED Indicator) - Remove 'allOf' property - Add '$ref' and 'unevaluatedProperties: false' in 'multi-led' Change in v12: - In Patch 5/5 (MT6370 Flash): - Rename all 'led_flash_setting *s' --> 'led_flash_setting *setting' - Rename 'max_uA' --> 'max_ua' in mt6370_init_flash_properties() Change in v11: - In Patch 1/8 (dt-bindings: MT6370 Charger) - Add more detailed description of irqs. - Adujust the order of irqs Change in v10: - In Patch 6/8 (MT6370 Charger): - Add a feature (disable input current limit) in 'mt6370_chg_init_setting()' - Add the header file <linux/devm-helpers.h> for using 'devm_work_autocancel()' and 'devm_delayed_work_autocancel() - Rename 'pwr_rdy' to 'opposite_pwr_rdy' in 'mt6370_chg_pwr_rdy_check()' - Rename enum elements ('MT6370_ATTACH_STAT_ATTACH_BC12_NOT_DONE' --> 'MT6370_ATTACH_STAT_ATTACH_WAIT_FOR_BC12') - Revise the assignment value of 'val.intval' in 'mt6370_chg_pwr_rdy_check()' to make the code easy to read. - Revise the initialization of bc12_work (INIT_WORK() --> using devm_work_autocancel()) and mivr_dwork (INIT_DELAYED_WORK + devm_add_action_or_reset() --> devm_delayed_work_autocancel()) - In Patch 8/8 (MT6370 LED Flashlight): - Add the revert code when '__mt6370_flash_brightness_set()' return failed. - Revise type of 'led_no' (u32 -> u8) - Revise type of 'default_state' (u32 -> enum led_default_state) - Revise the return value of '_mt6370_flash_brightness_set()' - Remove the useless function 'mt6370_init_common_properties()' - Use 'led_init_default_state_get()' to init 'led->default_state' Changes in v9: - In Patch 05/10: - Revise LINEAR_RANGE() and LINEAR_RANGE_IDX() - In Patch 07/10: - Fix wrong 'F_IINLMTSEL' setting in 'mt6370_chg_init_setting()' - Revise the usage of LINEAR_RANGE_IDX() - In Patch 09/10: - Revise the format of the comments. - In Patch 10/10: - Revise the format of the comments. Changes in v8: - In Patch 06/12: - Add linear_range_idx macro for declaring the linear_range struct simply. - In Patch 09/12: - Remove MT6370_CHG_LINEAR_RANGE() macro, and change to use LINEAR_RANGE_IDX() macro - In Patch 10/12: - Add include header file <linux/leds.h> - Remove useless 'enum mt6370_state' because of using 'enum led_default_state' - Revise the calculation of 'val' in 'mt6370_gen_breath_pattern()' - Replace the medthod of getting default-state by using led_init_default_state_get() - In Patch 11/12: - Add missing 'dependency config' in Kconfig - Revise all multi-line comments - In Patch 12/12: - Add missing header file <linux/property.h> - Remove useledd header file <linux/of_device.h> - Revise the comment of 'mt6370_check_vendor_info()' Changes in v7: - In Patch 05/13: - Add the second compatible string for 'mt6372' - Add 'mediatek,bled-exponential-mode-enable' property for enable the exponential mode of backlight brightness - Add validation for the maximum value of 'default-brightness' and 'max-brightness' - In Patch 07/13: - Move '#define MT6370_REG_MAXADDR' to the next line of '#define MT6370_REG_CHG_MASK1' - Rename 'MT6370_REG_ADDRLEN' to 'MT6370_MAX_ADDRLEN' - In Patch 08/13: - Revise 'devm_add_action_or_reset(dev, ...)' to one line - Revise 'return regmap_update_bits(...)' with using positive conditional - In Patch 09/13: - Add AICR(100mA ~ 350mA), ICHG(100mA ~ 800mA) macros - Remove 400mA AICR and 900mA ICHG macros - Revise using 'if-else' to 'switch-case' in mt6370_adc_read_scale() where the adc channel is ibus or ibat - In Patch 10/13: - Revise the method to enable/disable irq - Revise all 'if (ret < 0)' to 'if (ret)' after using mt6370_chg_field_set/get() - Revise all 'OTG' text again - In Patch 11/13: - Add the comment for the union of 'struct mt6370_led' - Revise the wrong description of 'Authors' - Revise some typos (e.g. led --> LED) - Revise 'if (!fwnode_property_read_string())' to 'ret = fwnode_property_read_string()' - Replace 'memcpy(...)' with 'put_unaligned_be24()' in mt6370_gen_breath_pattern() - Replace all 'LED_OFF' with 0 - Remove the redundant assignment in mt6370_mc_pattern_clear() - In Patch 12/13: - Fix the indentation. - For the well defined macro, the parenthesis is needed for input parameters. - Replace some dev_warn to dev_info in 'init_flash_properties'. - Add sentinel comment for the terminator entry of of_device_id. - Use priv->fled_torch_used directly. - Delete 0 in {}. - Use _uA instead of _UA in definition. - Refine the description. - Use usleep_range instead of udelay. - Rename config to LEDS_MT6370_FLASH. - Add missing ">" in copyright. - Change the Kconfig order - In Patch 13/13: - Add support 'exponential mode' property parsing - Add 'return dev_err_probe()' after 'if (IS_ERR(priv->enable_gpio))' - Add 'mt6372' compatible string - Revise Kconfig help text - Revise update()/get() for supporting 16384 steps (MT6372) - Revise all shift usages form using 'ffs() and fls()' to defining the _SHIFT macros. - Revise 'brightness ? 1 : 0' to '!!brightness' in gpiod_set_value() Changes in v6: - In Patch 03/13: - Add 'reg' property of led of multi-led to prevent checking error. - In Patch 08/13: - Convert tcpci as device resource managed with 'devm_add_action_or_reset' api. - Refine remvoe callback. - Refine the commit text from 'this commit add' to 'add'. - In Patch 09/13: - Using 'struct device *dev = &pdev->dev' in probe() - Revise the sixth parameter of regmap_read_poll_timeout() by Replacing '1000' with 'MILLI' - Revise the units of three macros - MT6370_AICR_400MA --> MT6370_AICR_400_mA - MT6370_ICHG_500MA --> MT6370_ICHG_500_mA - MT6370_ICHG_900MA --> MT6370_ICHG_900_mA - In patch 10/13: - Remove the varable (*psy_desc) of struct mt6370_priv - Remove the deprecated usb type (POWER_SUPPLY_TYPE_USB_CDP and POWER_SUPPLY_TYPE_USB_DCP) - Remove useless remove() - Revise all units from mini- to micro- - Revise get/set power_supply_prop (change to directly return get/set regmap_field) - Revise probe() and use devm_add_action_or_reset() for handling of the workqueue/delayed_work/mutex - Revise mt6370_chg_psy_desc - Add '.name = "mt6370-charger"' - Use 'static const' - In patch 11/13: - Remove the 'ko' from mt6370 led Kconfig description. - Add both authors for Alice and ChiYuan. - Use pdata to distinguish the code from mt6370/71 to mt6372. - Instead of 'state' define, use the 'state' enum. - Fix the typo for 'MT6372_PMW_DUTY'. - For pwm_duty define, replace with bit macro - 1. - Refine all the labels from 'out' to 'out_unlock'. - Use struct 'dev' variable and 'dev_err_probe' to optimize the LOC. - Revise for the array initialization from {0} to {}. - Move into rgb folder and rename file name to 'leds-mt6370-rgb'. - Refine the 'comma' usage in struct/enum. - In patch 12/13: - Use 'GENMASK' instead of 'BIT'. - Use dev_err_probe to decrease LOC. - Use 'dev' variable to make probe function more clean. - Refine the return of _mt6370_flash_brightness_set function. - Refine the descriptions. - Use mt6370_clamp() instead of clamp_align(). - Use device resource managed API for v4l2 flash_release. Changes in v5: - In patch 07/13: - Add the comma in the last REGMAP_IRQ_REG_LINE(), DEFINE_RES_IRQ_NAMED() and MFD_CELL_RES() - Add the prefix in the first parameter of all mfd_cell - Move enum and struct mt6370_info to mt6370.h - Remove struct device *dev in struct mt6370_info - Revise the description of Kconfig help text - Revise MODULE_DESCRIPTION() - In patch 08/13: - Add comma for the last index of mt6370_reg_init. - Use dev_err_probe to decrease LOC. - Use 'dev' variable to make probe function more clean. - Refine kconfig text. - Remove both 'else' in set_vbus callback. - Remove comma for of_device_id if the assigned member is only one. - In patch 09/13: - Replace using snprintf() with sysfs_emit() in mt6370_adc_read_label() - Remove macro ADC_CONV_TIME_US - Revise all variable ordering - Revise the description of Kconfig help text - Revise MODULE_DESCRIPTION() - In patch 10/13: - Replace unsigned int type of pwr_rdy with bool in mt6370_chg_set_online() - Remove redundant 'else' in mt6370_chg_field_get() - Revise 'if-else' in mt6370_chg_field_set() - Revise 'if' condition in mt6370_chg_enable_irq() - Revise all text 'otg' --> 'OTG' - Revise MT6370_MIVR_IBUS_TH_100_MA --> MT6370_MIVR_IBUS_TH_100_mA - Revise the description of Kconfig help text - In patch 12/13: - Refine the coding style. - Use "dev" instead of "&pdev->dev". - In patch 13/13: - Add missed <mod_devicetable.h> - Add struct device *dev in probe() to make code cleaning - Remove useless including header file <gpio/driver.h>, <of.h> - Remove useless variable uasage in mt6370_init_backlight_properties() - Remove redundant checking enable_gpio in mt6370_bl_update_status() - Remove redundant parentheses in mt6370_bl_get_brightness() - Revise the description of Kconfig help text - Revise the calculation of hys_th_steps Changes in v4: - In patch 02/13: - Add minItems of "io-channel-names" - Replace text "Mediatek" with "MediaTek" - In patch 06/13: - Roll back all "$ref: " to v2 patch style (using "/schemas/...") - In patch 07/13: - Replace text "Mediatek" with "MediaTek" in Kconfig - Replace "first break and then return" with "return directly" in "mt6370_check_vendor_info()" - Add module name related description in Kconfig helptext - Add Copyright in the source code - Add header file "mt6370.h" for all "#define IRQ" - Adjust Makefile order of MT6370 - Refine "bank_idx" and "bank_addr" in "mt6375_regmap_read()" / "mt6375_regmap_write()" - Refine redundant "else if" in "mt6370_regmap_read()" - In patch 08/13: - Replace text "Mediatek" with "MediaTek" in Kconfig - Replace "first ret=regulator_(dis/en)able and then return" with "return directly" in "mt6370_tcpc_set_vbus()" - Replace header file <linux/of.h> with <linux/mod_devicetable.h> - Add Copyright in the source code - Add module name related description in Kconfig helptext - Remove header file <linux/of.h> - Refine all probe error by using dev_err_probe() - In patch 09/13: - Replace text "Mediatek" with "MediaTek" - Replace all "first dev_err() and then return" with "return dev_err_probe()" - Add Copyright in the source code - Add module name related description in Kconfig - Add unit suffix of macro "ADC_CONV_POLLING_TIME" - Add new macro "ADC_CONV_TIME_MS" - Adjust the position of include file <mediatek,mt6370_adc.h> - Adjust the postions between <linux/module.h> and <linux/mod_devicetable.h> - Fix some incorrect characters - In patch 10/13: - Replace text "Mediatek" with "MediaTek" in Kconfig and MODULE_DESCRIPTION() - Replace "mt6370_chg_val_to_reg" and "mt6370_chg_reg_to_val" with "linear_range" API - Replace "first break and then return" with "return directly" in all cases of get/set power_supply_property - Replace all "first dev_err() and then return" with "return dev_err_probe()" - Replace all "return IS_ERR(priv->rdev) ? PTR_ERR(priv->rdev) : 0" with "PTR_ERR_OR_ZERO()" - Replace "priv->dev->of_node" with "dev_of_node()" - Add Copyright in the source code - Add module name related description in Kconfig helptext - Add proper unit of "MT6370_MIVR_IBUS_TH" - Add error check in "mt6370_chg_get_status" - Remove including <mediatek,mt6370_adc.h> header file - Remove redundant comma of every enum terminator line - Remove unwanted blank lines - Remove the useless label (toggle_cfo_exit:) - Remove using atomic - Remove using of_match_ptr() - Fix some incorrect characters - Fix updating wrong bits when using ena_gpiod of OTG regulator - Adjust the probe order in probe() - In patch 11/13: - Replace text "Mediatek" with "MediaTek" in Kconfig - Replace text "const" with "constant" in Kconfig - Add Copyright in the source code - In patch 12/13: - Replace text "Mediatek" with "MediaTek" in Kconfig - Add Copyright in the source code - In patch 13/13: - Replace text "Mediatek" with "MediaTek" in Kconfig - Add Copyright in the source code - Revise the comment of "PWM HYS STEPS" Changes in v3: - Remove ADC ABI file, which is added in v2 Patch 7 - In patch 02/14: - Add items and remove maxItems of io-channels - Add io-channel-names and describe each item - Add "unevaluatedProperties: false" in "usb-otg-vbus-regulator" - Rename "enable-gpio" to "enable-gpios" in "usb-otg-vbus-regulator" - In patch 03/14: - Use leds-class-multicolor.yaml instead of common.yaml. - Split multi-led and led node. - Add subdevice "led" in "multi-led". - In patch 04/14: - Remove the description of enum. - In patch 05/14: - Rename "mediatek,bled-pwm-hys-input-threshold-steps" to "mediatek,bled-pwm-hys-input-th-steps" - Refine "bled-pwm-hys-input-th-steps", "bled-ovp-microvolt", "bled-ocp-microamp" enum values - In patch 06/14: - Use " in entire patchset - Refine ADC description - Rename "enable-gpio" to "enable-gpios" in "regualtor" - In patch 07/14: - Refine Kconfig help text - Refine error message of unknown vendor ID in mt6370_check_vendor_info() - Refine return value handling of mt6370_regmap_read() - Refine all probe error by using dev_err_probe() - Refine "bank_idx" and "bank_addr" in mt6370_regmap_read() and mt6370_regmap_write() - Add "#define VENID*" and drop the comments in mt6370_check_vendor_info() - Drop "MFD" in MODULE_DESCRIPTION() - In patch 09/14: - Refine Kconfig help text - In patch 10/14: - Refine Kconfig help text - Refine all channel value in read_scale() a. current: uA --> mA b. voltage: uV --> mV c. temperature: degrees Celsius --> milli degrees Celsius - Add "default:" condition of switch statement in read_scale() and read_raw() - Add error message for reading ADC register failed - Add the comment for adc_lock - Add <linux/mod_devicetable.h> header file for struct of_device_id - Replace "adc" text with "ADC" in all of the error messages - In patch 12/14: - Refine the grammer of the Kconfig. - Change reg mode to the const current mode. - In patch 14/14: - Refine bool properties parsing (pwm-enable, ovp-shutdown, ocp-shutdown) in DT parsing function - Refine u32 and u8 properties parsing (pwm-hys-input-th-steps, ovp-microvolt, ocp-microamp), from using register value to using actual value - Refine error string of "channle-use" parsing failed - Refine Kconfig help text Changes in v2: - In patch 01/15: - Add "unevaluatedProperties: false". - Delete "DT bindings". - Refine the description to fit in 80 columns. - Skip the connector description. - In patch 02/15: - Refine items description of interrupt-name - Rename "usb-otg-vbus" to "usb-otg-vbus-regulator" - Add constraint properties for ADC - In patch 03/15: - Skip not useful description of "^(multi-)?led@[0-3]$" and reg. - Due to the dependency, remove the mention of mfd document directory. - Delete Soft-start property. In design aspect, we think soft-restart should always be enabled, our new chip has deleted the related setting register , also, we don’t allow user adjust this parameter in this chip. - Refine the commit message. - In patch 04/15: - Skip not useful description of "^led@[0-1]$" and reg. - Add apace after '#'. - Refine the commit message. - In patch 05/15: - Remove "binding documentation" in subject title - Refine description of mt6370 backlight binding document - Refine properties name(bled-pwm-hys-input-bit, bled-ovp-microvolt, bled-ocp-microamp) and their description - In patch 06/15: - Refine ADC and Regulator descriptions - Refine include header usage in example - Refine node name to generic node name("pmic@34") - Refine led example indentation - Refine license of mediatek,mt6370_adc.h - Rename the dts example from IRQ define to number. - Remove mediatek,mt6370.h - In patch 07/15: - Add ABI documentation for mt6370 non-standard ADC sysfs interfaces. - In patch 08/15: - Add all IRQ define into mt6370.c. - Refine include header usage - In patch 09/15: - No changes. - In patch 10/15: - Use 'gpiod_get_from_of_node' to replace 'fwnode_gpiod_get_index'. - In patch 11/15: - Refine Kconfig mt6370 help text - Refine mask&shift to FIELD_PREP() - Refine mutex lock name ("lock" -> "adc_lock") - Refine mt6370_adc_read_scale() - Refine mt6370_adc_read_offset() - Refine mt6370_channel_labels[] by using enum to index chan spec - Refine MT6370_ADC_CHAN() - Refine indio_dev->name - Remove useless include header files - In patch 12/15: - Refine mt6370_chg_otg_rdesc.of_match ("mt6370,otg-vbus" -> "usb-otg-vbus-regulator") to match DT binding - In patch 13/15: - Refine Kconfig description. - Remove include "linux/of.h" and use "linux/mod_devicetable.h". - Place a comma for the last element of the const unsigned int array. - Add a comment line for the mutex 'lock'. - In probe function, use 'dev_err_probe' in some judgement to reduce the LOC. - Refine include header usage. BIT/GENMASK -> linux/bits.h FIELD_GET -> linux/bitfield.h - In patch 14/15: - Add blank line. - Replace container_of() with to_mt6370_led() . - Refine description of ramping. - Refine the mt6370_init_common_properties function. - Refine the probe return. - In patch 15/15: - Refine MT6370 help text in Kconfig - Refine DT Parse function - Remove useless enum - Add comment for 6372 backward compatible in bl_update_status() and check_vendor_info() - Using dev_err_probe(); insteads dev_err()&return; in the probe() Alice Chen (2): dt-bindings: leds: Add MediaTek MT6370 flashlight leds: flash: mt6370: Add MediaTek MT6370 flashlight support ChiYuan Huang (2): dt-bindings: leds: mt6370: Add MediaTek MT6370 current sink type LED indicator leds: rgb: mt6370: Add MediaTek MT6370 current sink type LED Indicator support ChiaEn Wu (1): iio: adc: mt6370: Add MediaTek MT6370 support .../bindings/leds/mediatek,mt6370-flashlight.yaml | 41 + .../bindings/leds/mediatek,mt6370-indicator.yaml | 82 ++ drivers/iio/adc/Kconfig | 12 + drivers/iio/adc/Makefile | 1 + drivers/iio/adc/mt6370-adc.c | 305 ++++++ drivers/leds/flash/Kconfig | 14 + drivers/leds/flash/Makefile | 1 + drivers/leds/flash/leds-mt6370-flash.c | 631 ++++++++++++ drivers/leds/rgb/Kconfig | 13 + drivers/leds/rgb/Makefile | 1 + drivers/leds/rgb/leds-mt6370-rgb.c | 1010 ++++++++++++++++++++ 11 files changed, 2111 insertions(+) create mode 100644 Documentation/devicetree/bindings/leds/mediatek,mt6370-flashlight.yaml create mode 100644 Documentation/devicetree/bindings/leds/mediatek,mt6370-indicator.yaml create mode 100644 drivers/iio/adc/mt6370-adc.c create mode 100644 drivers/leds/flash/leds-mt6370-flash.c create mode 100644 drivers/leds/rgb/leds-mt6370-rgb.c -- 2.7.4
