Re: [PATCH v2 1/2] dt-bindings: it6505: add properties to restrict output bandwidth

[neil.armstrong@xxxxxxxxxx]

On 05/10/2022 08:19, allen.chen@xxxxxxxxxx wrote:
> Hi
>
> data-lanes is output configuration. Maybe it is not suitable to put data-lanes in input endpoint.
> extcon doesn't have output endpoint, so I don't know where to put is better.

Ok it wasn't clear enough

Then rename the property to something more specific like:
ite,dp-output-data-lane-count

Use the same naming scheme for the other property:
ite,dp-output-max-pixel-clock-khz

Neil

> -----Original Message-----
> From: Neil Armstrong <neil.armstrong@xxxxxxxxxx>
> Sent: Thursday, September 29, 2022 4:40 PM
> To: Allen Chen (陳柏宇) <allen.chen@xxxxxxxxxx>
> Cc: open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS <devicetree@xxxxxxxxxxxxxxx>; Kenneth Hung (洪家倫) <Kenneth.Hung@xxxxxxxxxx>; Jernej Skrabec <jernej.skrabec@xxxxxxxxx>; Krzysztof Kozlowski <krzysztof.kozlowski+dt@xxxxxxxxxx>; Jau-Chih Tseng (曾昭智) <Jau-Chih.Tseng@xxxxxxxxxx>; David Airlie <airlied@xxxxxxxx>; open list:DRM DRIVERS <dri-devel@xxxxxxxxxxxxxxxxxxxxx>; Neil Armstrong <narmstrong@xxxxxxxxxxxx>; open list <linux-kernel@xxxxxxxxxxxxxxx>; Robert Foss <robert.foss@xxxxxxxxxx>; Pin-yen Lin <treapking@xxxxxxxxxxxx>; Hermes Wu (吳佳宏) <Hermes.Wu@xxxxxxxxxx>; Rob Herring <robh+dt@xxxxxxxxxx>; Laurent Pinchart <Laurent.pinchart@xxxxxxxxxxxxxxxx>; Andrzej Hajda <andrzej.hajda@xxxxxxxxx>; Jonas Karlman <jonas@xxxxxxxxx>
> Subject: Re: [PATCH v2 1/2] dt-bindings: it6505: add properties to restrict output bandwidth
>
> Hi,
>
> On 29/09/2022 03:44, allen wrote:
> > From: allen chen <allen.chen@xxxxxxxxxx>
> >
> > Add properties to restrict dp output data-lanes and clock.
> >
> > Signed-off-by: Pin-Yen Lin <treapking@xxxxxxxxxxxx>
> > Signed-off-by: Allen Chen <allen.chen@xxxxxxxxxx>
> > ---
> >    .../devicetree/bindings/display/bridge/ite,it6505.yaml | 10 ++++++++++
> >    1 file changed, 10 insertions(+)
> >
> > diff --git
> > a/Documentation/devicetree/bindings/display/bridge/ite,it6505.yaml
> > b/Documentation/devicetree/bindings/display/bridge/ite,it6505.yaml
> > index 833d11b2303a..62b9f2192202 100644
> > --- a/Documentation/devicetree/bindings/display/bridge/ite,it6505.yaml
> > +++ b/Documentation/devicetree/bindings/display/bridge/ite,it6505.yaml
> > @@ -52,6 +52,14 @@ properties:
> >        maxItems: 1
> >        description: extcon specifier for the Power Delivery
> >    
> > +  data-lanes:
> > +    maxItems: 1
> > +    description: restrict the dp output data-lanes with value of 1-4
>
> Can't you use the data-lanes property in the first port endpoint ?
>
> Look at Documentation/devicetree/bindings/display/bridge/ti,sn65dsi83.yaml
>
> > +
> > +  max-pixel-clock-khz:
> > +    maxItems: 1
> > +    description: restrict max pixel clock
>
> New vendor specific properties should have the ite, prefix.
>
> > +
> >      port:
> >        $ref: /schemas/graph.yaml#/properties/port
> >        description: A port node pointing to DPI host port node @@ -84,6
> > +92,8 @@ examples:
> >                pwr18-supply = <&it6505_pp18_reg>;
> >                reset-gpios = <&pio 179 1>;
> >                extcon = <&usbc_extcon>;
> > +            data-lanes = <2>;
> > +            max-pixel-clock-khz = <150000>;
> >    
> >                port {
> >                    it6505_in: endpoint {
>
> Thanks,
> Neil