Il 28/09/22 10:43, Garmin.Chang ha scritto:
Add domain control data including bus protection data size
change due to more protection steps in mt8188.
Signed-off-by: Garmin.Chang <Garmin.Chang@xxxxxxxxxxxx>
---
drivers/soc/mediatek/mt8188-pm-domains.h | 623 +++++++++++++++++++++++
drivers/soc/mediatek/mtk-pm-domains.c | 5 +
include/linux/soc/mediatek/infracfg.h | 121 +++++
3 files changed, 749 insertions(+)
create mode 100644 drivers/soc/mediatek/mt8188-pm-domains.h
diff --git a/drivers/soc/mediatek/mt8188-pm-domains.h b/drivers/soc/mediatek/mt8188-pm-domains.h
new file mode 100644
index 000000000000..63181f05457e
--- /dev/null
+++ b/drivers/soc/mediatek/mt8188-pm-domains.h
@@ -0,0 +1,623 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Copyright (c) 2022 MediaTek Inc.
+ * Author: Garmin Chang <garmin.chang@xxxxxxxxxxxx>
+ */
+
+#ifndef __SOC_MEDIATEK_MT8188_PM_DOMAINS_H
+#define __SOC_MEDIATEK_MT8188_PM_DOMAINS_H
+
+#include "mtk-pm-domains.h"
+#include <dt-bindings/power/mediatek,mt8188-power.h>
+
+/*
+ * MT8188 power domain support
+ */
+
+static const struct scpsys_domain_data scpsys_domain_data_mt8188[] = {
+ [MT8188_POWER_DOMAIN_MFG0] = {
+ .name = "mfg0",
+ .sta_mask = BIT(1),
+ .ctl_offs = 0x300,
+ .pwr_sta_offs = 0x174,
+ .pwr_sta2nd_offs = 0x178,
+ .sram_pdn_bits = BIT(8),
+ .sram_pdn_ack_bits = BIT(12),
+ .caps = MTK_SCPD_KEEP_DEFAULT_OFF | MTK_SCPD_DOMAIN_SUPPLY,
+ },
+ [MT8188_POWER_DOMAIN_MFG1] = {
+ .name = "mfg1",
+ .sta_mask = BIT(2),
+ .ctl_offs = 0x304,
+ .pwr_sta_offs = 0x174,
+ .pwr_sta2nd_offs = 0x178,
+ .sram_pdn_bits = BIT(8),
+ .sram_pdn_ack_bits = BIT(12),
+ .bp_infracfg = {
+ BUS_PROT_WR(MT8188_TOP_AXI_PROT_EN_MFG1_STEP1,
+ MT8188_TOP_AXI_PROT_EN_SET,
+ MT8188_TOP_AXI_PROT_EN_CLR,
+ MT8188_TOP_AXI_PROT_EN_STA),
+ BUS_PROT_WR(MT8188_TOP_AXI_PROT_EN_2_MFG1_STEP2,
+ MT8188_TOP_AXI_PROT_EN_2_SET,
+ MT8188_TOP_AXI_PROT_EN_2_CLR,
+ MT8188_TOP_AXI_PROT_EN_2_STA),
+ BUS_PROT_WR(MT8188_TOP_AXI_PROT_EN_1_MFG1_STEP3,
+ MT8188_TOP_AXI_PROT_EN_1_SET,
+ MT8188_TOP_AXI_PROT_EN_1_CLR,
+ MT8188_TOP_AXI_PROT_EN_1_STA),
+ BUS_PROT_WR(MT8188_TOP_AXI_PROT_EN_2_MFG1_STEP4,
+ MT8188_TOP_AXI_PROT_EN_2_SET,
+ MT8188_TOP_AXI_PROT_EN_2_CLR,
+ MT8188_TOP_AXI_PROT_EN_2_STA),
+ BUS_PROT_WR(MT8188_TOP_AXI_PROT_EN_MFG1_STEP5,
+ MT8188_TOP_AXI_PROT_EN_SET,
+ MT8188_TOP_AXI_PROT_EN_CLR,
+ MT8188_TOP_AXI_PROT_EN_STA),
+ BUS_PROT_WR(MT8188_TOP_AXI_PROT_EN_SUB_INFRA_VDNR_MFG1_STEP6,
+ MT8188_TOP_AXI_PROT_EN_SUB_INFRA_VDNR_SET,
+ MT8188_TOP_AXI_PROT_EN_SUB_INFRA_VDNR_CLR,
+ MT8188_TOP_AXI_PROT_EN_SUB_INFRA_VDNR_STA),
+ },
+ .caps = MTK_SCPD_KEEP_DEFAULT_OFF,
Please add MTK_SCPD_DOMAIN_SUPPLY cap to MFG1 as well.
For more information, please look at:
13bde169c6fe ("soc: mediatek: mtk-pm-domains: Allow probing vreg supply on two MFGs")
Regards,
Angelo
