Re: [PATCH 2/2] arm64: dts: qcom: sm6125: Add I2C and SPI nodes

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




On 1.10.2022 20:56, Martin Botka wrote:
> This commit adds support for I2C and
> SPI on SM6125 SoC
> 
> Signed-off-by: Martin Botka <martin.botka@xxxxxxxxxxxxxx>
> ---
>  arch/arm64/boot/dts/qcom/sm6125.dtsi | 296 +++++++++++++++++++++++++++
>  1 file changed, 296 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/qcom/sm6125.dtsi b/arch/arm64/boot/dts/qcom/sm6125.dtsi
> index 350713742ccd..d35ea4474234 100644
> --- a/arch/arm64/boot/dts/qcom/sm6125.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sm6125.dtsi
> @@ -1076,6 +1076,302 @@ sdhc_2: mmc@4784000 {
>  			status = "disabled";
>  		};
>  
> +		qupv3_id_0: geniqup@4ac0000 {
> +			compatible = "qcom,geni-se-qup";
> +			reg = <0x04ac0000 0x2000>;
> +			clock-names = "m-ahb", "s-ahb";
> +			clocks = <&gcc GCC_QUPV3_WRAP_0_M_AHB_CLK>,
> +				 <&gcc GCC_QUPV3_WRAP_0_S_AHB_CLK>;
> +			#address-cells = <1>;
> +			#size-cells = <1>;
> +			ranges;
> +			status = "disabled";
> +
> +			i2c0: i2c@4a80000 {
> +				compatible = "qcom,geni-i2c";
> +				reg = <0x04a80000 0x4000>;
> +				interrupts = <GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH>;
> +				#address-cells = <1>;
> +				#size-cells = <0>;
#-cells at the end, before status.

> +				clock-names = "se";
> +				clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>;
> +				dmas = <&gpi_dma0 0 0 3 64 0>,
> +				       <&gpi_dma0 1 0 3 64 0>;
Please use constants from <dt-bindings/dma/qcom-gpi.h>.

Konrad
> +				dma-names = "tx", "rx";
> +				pinctrl-names = "default", "sleep";
> +				pinctrl-0 = <&qup_i2c0_default>;
> +				pinctrl-1 = <&qup_i2c0_sleep>;
> +				status = "disabled";
> +			};
> +
> +			i2c1: i2c@4a84000 {
> +				compatible = "qcom,geni-i2c";
> +				reg = <0x04a84000 0x4000>;
> +				interrupts = <GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH>;
> +				#address-cells = <1>;
> +				#size-cells = <0>;
> +				clock-names = "se";
> +				clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>;
> +				dmas = <&gpi_dma0 0 1 3 64 0>,
> +				       <&gpi_dma0 1 1 3 64 0>;
> +				dma-names = "tx", "rx";
> +				pinctrl-names = "default", "sleep";
> +				pinctrl-0 = <&qup_i2c1_default>;
> +				pinctrl-1 = <&qup_i2c1_sleep>;
> +				status = "disabled";
> +			};
> +
> +			i2c2: i2c@4a88000 {
> +				compatible = "qcom,geni-i2c";
> +				reg = <0x04a88000 0x4000>;
> +				interrupts = <GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH>;
> +				#address-cells = <1>;
> +				#size-cells = <0>;
> +				clock-names = "se";
> +				clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>;
> +				dmas = <&gpi_dma0 0 2 3 64 0>,
> +				       <&gpi_dma0 1 2 3 64 0>;
> +				dma-names = "tx", "rx";
> +				pinctrl-names = "default", "sleep";
> +				pinctrl-0 = <&qup_i2c2_default>;
> +				pinctrl-1 = <&qup_i2c2_sleep>;
> +				status = "disabled";
> +			};
> +
> +			i2c3: i2c@4a8c000 {
> +				compatible = "qcom,geni-i2c";
> +				reg = <0x04a8c000 0x4000>;
> +				interrupts = <GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH>;
> +				#address-cells = <1>;
> +				#size-cells = <0>;
> +				clock-names = "se";
> +				clocks = <&gcc GCC_QUPV3_WRAP0_S3_CLK>;
> +				dmas = <&gpi_dma0 0 3 3 64 0>,
> +				       <&gpi_dma0 1 3 3 64 0>;
> +				dma-names = "tx", "rx";
> +				pinctrl-names = "default", "sleep";
> +				pinctrl-0 = <&qup_i2c3_default>;
> +				pinctrl-1 = <&qup_i2c3_sleep>;
> +				status = "disabled";
> +			};
> +
> +			i2c4: i2c@4a90000 {
> +				compatible = "qcom,geni-i2c";
> +				reg = <0x04a90000 0x4000>;
> +				interrupts = <GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH>;
> +				#address-cells = <1>;
> +				#size-cells = <0>;
> +				clock-names = "se";
> +				clocks = <&gcc GCC_QUPV3_WRAP0_S4_CLK>;
> +				dmas = <&gpi_dma0 0 4 3 64 0>,
> +				       <&gpi_dma0 1 4 3 64 0>;
> +				dma-names = "tx", "rx";
> +				pinctrl-names = "default", "sleep";
> +				pinctrl-0 = <&qup_i2c4_default>;
> +				pinctrl-1 = <&qup_i2c4_sleep>;
> +				status = "disabled";
> +			};
> +
> +			spi0: spi@4a80000 {
> +				compatible = "qcom,geni-spi";
> +				#address-cells = <1>;
> +				#size-cells = <0>;
> +				reg = <0x04a80000 0x4000>;
> +				clock-names = "se";
> +				clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>;
> +				pinctrl-names = "default", "sleep";
> +				pinctrl-0 = <&qup_spi0_default>;
> +				pinctrl-1 = <&qup_spi0_sleep>;
> +				interrupts = <GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH>;
> +				dmas = <&gpi_dma0 0 0 1 64 0>,
> +				       <&gpi_dma0 1 0 1 64 0>;
> +				dma-names = "tx", "rx";
> +				status = "disabled";
> +			};
> +
> +			spi2: spi@4a88000 {
> +				compatible = "qcom,geni-spi";
> +				#address-cells = <1>;
> +				#size-cells = <0>;
> +				reg = <0x04a88000 0x4000>;
> +				clock-names = "se";
> +				clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>;
> +				pinctrl-names = "default", "sleep";
> +				pinctrl-0 = <&qup_spi2_default>;
> +				pinctrl-1 = <&qup_spi2_sleep>;
> +				interrupts = <GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH>;
> +				dmas = <&gpi_dma0 0 2 1 64 0>,
> +				       <&gpi_dma0 1 2 1 64 0>;
> +				dma-names = "tx", "rx";
> +				status = "disabled";
> +			};
> +		};
> +
> +		qupv3_id_1: geniqup@4cc0000 {
> +			compatible = "qcom,geni-se-qup";
> +			reg = <0x04cc0000 0x2000>;
> +			clock-names = "m-ahb", "s-ahb";
> +			clocks = <&gcc GCC_QUPV3_WRAP_1_M_AHB_CLK>,
> +				 <&gcc GCC_QUPV3_WRAP_1_S_AHB_CLK>;
> +			#address-cells = <1>;
> +			#size-cells = <1>;
> +			ranges;
> +			status = "disabled";
> +
> +			i2c5: i2c@4c80000 {
> +				compatible = "qcom,geni-i2c";
> +				reg = <0x04c80000 0x4000>;
> +				interrupts = <GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH>;
> +				#address-cells = <1>;
> +				#size-cells = <0>;
> +				clock-names = "se";
> +				clocks = <&gcc GCC_QUPV3_WRAP1_S0_CLK>;
> +				dmas = <&gpi_dma1 0 0 3 64 0>,
> +				       <&gpi_dma1 1 0 3 64 0>;
> +				dma-names = "tx", "rx";
> +				pinctrl-names = "default", "sleep";
> +				pinctrl-0 = <&qup_i2c5_default>;
> +				pinctrl-1 = <&qup_i2c5_sleep>;
> +				status = "disabled";
> +			};
> +
> +			i2c6: i2c@4c84000 {
> +				compatible = "qcom,geni-i2c";
> +				reg = <0x04c84000 0x4000>;
> +				interrupts = <GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH>;
> +				#address-cells = <1>;
> +				#size-cells = <0>;
> +				clock-names = "se";
> +				clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>;
> +				dmas = <&gpi_dma1 0 1 3 64 0>,
> +				       <&gpi_dma1 1 1 3 64 0>;
> +				dma-names = "tx", "rx";
> +				pinctrl-names = "default", "sleep";
> +				pinctrl-0 = <&qup_i2c6_default>;
> +				pinctrl-1 = <&qup_i2c6_sleep>;
> +				status = "disabled";
> +			};
> +
> +			i2c7: i2c@4c88000 {
> +				compatible = "qcom,geni-i2c";
> +				reg = <0x04c88000 0x4000>;
> +				interrupts = <GIC_SPI 310 IRQ_TYPE_LEVEL_HIGH>;
> +				#address-cells = <1>;
> +				#size-cells = <0>;
> +				clock-names = "se";
> +				clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>;
> +				dmas = <&gpi_dma1 0 2 3 64 0>,
> +				       <&gpi_dma1 1 2 3 64 0>;
> +				dma-names = "tx", "rx";
> +				pinctrl-names = "default", "sleep";
> +				pinctrl-0 = <&qup_i2c7_default>;
> +				pinctrl-1 = <&qup_i2c7_sleep>;
> +				status = "disabled";
> +			};
> +
> +			i2c8: i2c@4c8c000 {
> +				compatible = "qcom,geni-i2c";
> +				reg = <0x04c8c000 0x4000>;
> +				interrupts = <GIC_SPI 311 IRQ_TYPE_LEVEL_HIGH>;
> +				#address-cells = <1>;
> +				#size-cells = <0>;
> +				clock-names = "se";
> +				clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>;
> +				dmas = <&gpi_dma1 0 3 3 64 0>,
> +				       <&gpi_dma1 1 3 3 64 0>;
> +				dma-names = "tx", "rx";
> +				pinctrl-names = "default", "sleep";
> +				pinctrl-0 = <&qup_i2c8_default>;
> +				pinctrl-1 = <&qup_i2c8_sleep>;
> +				status = "disabled";
> +			};
> +
> +			i2c9: i2c@4c90000 {
> +				compatible = "qcom,geni-i2c";
> +				reg = <0x04c90000 0x4000>;
> +				interrupts = <GIC_SPI 312 IRQ_TYPE_LEVEL_HIGH>;
> +				#address-cells = <1>;
> +				#size-cells = <0>;
> +				clock-names = "se";
> +				clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>;
> +				dmas = <&gpi_dma1 0 4 3 64 0>,
> +				       <&gpi_dma1 1 4 3 64 0>;
> +				dma-names = "tx", "rx";
> +				pinctrl-names = "default", "sleep";
> +				pinctrl-0 = <&qup_i2c9_default>;
> +				pinctrl-1 = <&qup_i2c9_sleep>;
> +				status = "disabled";
> +			};
> +
> +			spi5: spi@4c80000 {
> +				compatible = "qcom,geni-spi";
> +				#address-cells = <1>;
> +				#size-cells = <0>;
> +				reg = <0x04c80000 0x4000>;
> +				clock-names = "se";
> +				clocks = <&gcc GCC_QUPV3_WRAP1_S0_CLK>;
> +				pinctrl-names = "default", "sleep";
> +				pinctrl-0 = <&qup_spi5_default>;
> +				pinctrl-1 = <&qup_spi5_sleep>;
> +				interrupts = <GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH>;
> +				dmas = <&gpi_dma1 0 0 1 64 0>,
> +				       <&gpi_dma1 1 0 1 64 0>;
> +				dma-names = "tx", "rx";
> +				status = "disabled";
> +			};
> +
> +			spi6: spi@4c84000 {
> +				compatible = "qcom,geni-spi";
> +				#address-cells = <1>;
> +				#size-cells = <0>;
> +				reg = <0x04c84000 0x4000>;
> +				clock-names = "se";
> +				clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>;
> +				pinctrl-names = "default", "sleep";
> +				pinctrl-0 = <&qup_spi6_default>;
> +				pinctrl-1 = <&qup_spi6_sleep>;
> +				interrupts = <GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH>;
> +				dmas = <&gpi_dma1 0 1 1 64 0>,
> +				       <&gpi_dma1 1 1 1 64 0>;
> +				dma-names = "tx", "rx";
> +				status = "disabled";
> +			};
> +
> +			spi8: spi@4c8c000 {
> +				compatible = "qcom,geni-spi";
> +				#address-cells = <1>;
> +				#size-cells = <0>;
> +				reg = <0x04c8c000 0x4000>;
> +				clock-names = "se";
> +				clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>;
> +				pinctrl-names = "default", "sleep";
> +				pinctrl-0 = <&qup_spi8_default>;
> +				pinctrl-1 = <&qup_spi8_sleep>;
> +				interrupts = <GIC_SPI 311 IRQ_TYPE_LEVEL_HIGH>;
> +				dmas = <&gpi_dma1 0 3 1 64 0>,
> +				       <&gpi_dma1 1 3 1 64 0>;
> +				dma-names = "tx", "rx";
> +				status = "disabled";
> +			};
> +
> +			spi9: spi@4c90000 {
> +				compatible = "qcom,geni-spi";
> +				#address-cells = <1>;
> +				#size-cells = <0>;
> +				reg = <0x04c90000 0x4000>;
> +				clock-names = "se";
> +				clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>;
> +				pinctrl-names = "default", "sleep";
> +				pinctrl-0 = <&qup_spi9_default>;
> +				pinctrl-1 = <&qup_spi9_sleep>;
> +				interrupts = <GIC_SPI 312 IRQ_TYPE_LEVEL_HIGH>;
> +				dmas = <&gpi_dma1 0 4 1 64 0>,
> +				       <&gpi_dma1 1 4 1 64 0>;
> +				dma-names = "tx", "rx";
> +				status = "disabled";
> +			};
> +		};
> +
>  		usb3: usb@4ef8800 {
>  			compatible = "qcom,sm6125-dwc3", "qcom,dwc3";
>  			reg = <0x04ef8800 0x400>;



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux