On Sat, Oct 01, 2022 at 05:12:56PM +0000, Biju Das wrote:
> > > > You can then control the phase selection using a top-level Counter
> > > > device extension (e.g. /sys/bus/counter/devices/counter0/phase)
> > that
> > > > configures whether you're in 16-bit phase or 32-phase counting
> > mode.
> > >
> > > So I need to introduce a new sysfs called phase. Use that one for
> > > Selecting the external clock pin for phase counting mode.
> > > Please correct me if I am wrong??
> > >
> > > Hardware supports 4 pins for phase counting mode,
> > >
> > > MTCLKA Input External clock A input pin (MTU1/MTU2 phase counting
> > mode
> > > A phase input) MTCLKB Input External clock B input pin (MTU1/MTU2
> > > phase counting mode B phase input) MTCLKC Input External clock C
> > input
> > > pin (MTU2 phase counting mode A phase input) MTCLKD Input External
> > > clock D input pin (MTU2 phase counting mode B phase input)
> > >
> > > For MTU1, it is fixed MTCLKA and MTCLKB.
> > > But for MTU2, it can be either 0-{ MTCLKA, MTCLKB} or 1 - { MTCLKC ,
> > > MTCLKD} On reset it is set to { MTCLKC , MTCLKD}.
> > >
> > > Cheers,
> > > Biju
> >
> > It doesn't need to be named "phase" specifically, but it seems like a
> > new sysfs file will be necessary in order to select the proper phase
> > counting mode.
> >
> > Are these MTCLK signals the quadrature A and B Signals you defined in
> > the counter driver?
>
> Yes, that is correct.
>
> Cheers,
> Biju
You should define a Signal then for each of the four MTCLK inputs.
Create synapse arrays for each Count respectively; e.g. Count 0 will
have Synapses for MTCLKA and MTCLKB, but Count 1 will probably need
Synapses for all four Signals (the action mode for two of them will be
COUNTER_SYNAPSE_ACTION_NONE depending on the configuration set).
What is the configuration when 32-bit phase counting mode is selected?
Does MTCLKA and MTCLKB serve as the counting signals in this case, with
overflows on the MTU1 register incrementing the MTU2 register?
William Breathitt Gray
Attachment:
signature.asc
Description: PGP signature
