On 9/30/22 3:56 PM, Krzysztof Kozlowski wrote:
On 30/09/2022 10:12, Bhupesh Sharma wrote:
+ snps,reset-gpio:
+ maxItems: 1
Why is this one here? It's already in snps,dwmac.
Actually this applies to several other properties. You have
unevaluatedProperties:false, so you do not have to duplicate snps,dwmac.
You only need to constrain it, like we said about interrupts in your
previous patch.
I was actually getting errors like the following without the same:
arm64/boot/dts/qcom/qcs404-evb-1000.dtb: ethernet@7a80000: Unevaluated
properties are not allowed ('snps,tso' was unexpected)
From schema: Documentation/devicetree/bindings/net/qcom,ethqos.yaml
So, its not clear to me that even though 'snps,dwmac.yaml' is referenced
here, the property appears as unevaluated.
Because snps,tso is not allowed, but the rest is.
+
+ power-domains:
+ maxItems: 1
+
+ resets:
+ maxItems: 1
+
+ rx-fifo-depth:
+ $ref: /schemas/types.yaml#/definitions/uint32
+
+ tx-fifo-depth:
+ $ref: /schemas/types.yaml#/definitions/uint32
+
+ snps,tso:
+ type: boolean
+ description: Enables the TSO feature (otherwise managed by MAC HW capability register).
You add here several new properties. Mention in commit msg changes from
pure conversion with answer to "why".
Right, most of them are to avoid the make dtbs_check errors / warnings
like the one mentioned above.
All of them should not be here.
I guess only 'snps,reset-gpio' need not be replicated here, as for
others I still see 'dtbs_check' error, if they are not replicated here:
arch/arm64/boot/dts/qcom/sm8150-hdk.dtb: ethernet@20000: Unevaluated
properties are not allowed ('power-domains', 'resets', 'rx-fifo-depth',
'tx-fifo-depth' were unexpected)
From schema: /Documentation/devicetree/bindings/net/qcom,ethqos.yaml
Am I missing something here?
Thanks.
