On 9/30/22 2:20 PM, Krzysztof Kozlowski wrote:
The pin configuration (done with generic pin controller helpers and as expressed by bindings) requires children nodes with either: 1. "pins" property and the actual configuration, 2. another set of nodes with above point. The qup_i2c12_default pin configuration used second method - with a "pinmux" child. Fixes: 44acee207844 ("arm64: dts: qcom: Add Lenovo Yoga C630") Cc: <stable@xxxxxxxxxxxxxxx> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx> --- arch/arm64/boot/dts/qcom/sdm850-lenovo-yoga-c630.dts | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/arch/arm64/boot/dts/qcom/sdm850-lenovo-yoga-c630.dts b/arch/arm64/boot/dts/qcom/sdm850-lenovo-yoga-c630.dts index be59a8ba9c1f..74f43da51fa5 100644 --- a/arch/arm64/boot/dts/qcom/sdm850-lenovo-yoga-c630.dts +++ b/arch/arm64/boot/dts/qcom/sdm850-lenovo-yoga-c630.dts @@ -487,8 +487,10 @@ pinconf { };&qup_i2c12_default {- drive-strength = <2>; - bias-disable; + pinmux { + drive-strength = <2>; + bias-disable; + }; };&qup_uart6_default {
Tested-by: Steev Klimaszewski <steev@xxxxxxxx>
