Re: [PATCH 4/4] arm64: dts: smaug: Add display panel node

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 29/09/2022 19:05, Diogo Ivo wrote:
> The Google Pixel C has a JDI LPM102A188A display panel. Add a
> DT node for it. Tested on Pixel C.
> 
> Signed-off-by: Diogo Ivo <diogo.ivo@xxxxxxxxxxxxxxxxxx>
> ---
>  arch/arm64/boot/dts/nvidia/tegra210-smaug.dts | 72 +++++++++++++++++++
>  1 file changed, 72 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/nvidia/tegra210-smaug.dts b/arch/arm64/boot/dts/nvidia/tegra210-smaug.dts
> index 20d092812984..271ef70747f1 100644
> --- a/arch/arm64/boot/dts/nvidia/tegra210-smaug.dts
> +++ b/arch/arm64/boot/dts/nvidia/tegra210-smaug.dts
> @@ -31,6 +31,39 @@ memory {
>  	};
>  
>  	host1x@50000000 {
> +		dc@54200000 {
> +			status = "okay";

You should override by labels, not by full path.

> +		};
> +
> +		dsia: dsi@54300000 {
> +			avdd-dsi-csi-supply = <&vdd_dsi_csi>;
> +			nvidia,boot-on;
> +			status = "okay";
> +
> +			link2: panel@0 {
> +				compatible = "jdi,lpm102a188a";
> +				reg = <0>;
> +			};
> +		};
> +
> +		dsib: dsi@54400000 {
> +			avdd-dsi-csi-supply = <&vdd_dsi_csi>;
> +			nvidia,ganged-mode = <&dsia>;
> +			nvidia,boot-on;
> +			status = "okay";
> +
> +			link1: panel@0 {
> +				compatible = "jdi,lpm102a188a";
> +				reg = <0>;
> +				power-supply = <&pplcd_vdd>;
> +				ddi-supply = <&pp1800_lcdio>;
> +				enable-gpios = <&gpio TEGRA_GPIO(V, 1) GPIO_ACTIVE_HIGH>;
> +				reset-gpios = <&gpio TEGRA_GPIO(V, 2) GPIO_ACTIVE_LOW>;
> +				link2 = <&link2>;
> +				backlight = <&backlight>;
> +			};
> +		};
> +
>  		dpaux: dpaux@545c0000 {
>  			status = "okay";
>  		};
> @@ -1627,6 +1660,37 @@ nau8825@1a {
>  			status = "okay";
>  		};
>  
> +		backlight: lp8557-backlight@2c {

Node names should be generic: backlight
https://devicetree-specification.readthedocs.io/en/latest/chapter2-devicetree-basics.html#generic-names-recommendation

> +			compatible = "ti,lp8557";
> +			reg = <0x2c>;
> +			power-supply = <&pplcd_vdd>;
> +			enable-supply = <&pp1800_lcdio>;
> +			bl-name = "lp8557-backlight";
> +			dev-ctrl = /bits/ 8 <0x01>;
> +			init-brt = /bits/ 8 <0x80>;
> +
> +			/* Full scale current, 20mA */
> +			rom_11h {

No underscores in node names, unless something requires it?

> +				rom-addr = /bits/ 8 <0x11>;
> +				rom-val = /bits/ 8 <0x05>;
> +			};

Best regards,
Krzysztof




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux