[PATCH v3 13/13] arm64: dts: rockchip: Add IR receiver node to ODROID-M1

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Add the infrared receiver and its associated pinctrl entry. Note that
there is an external pullup to VCC3V3_SYS.

Signed-off-by: Aurelien Jarno <aurelien@xxxxxxxxxxx>
Tested-by: Dan Johansen <strit@xxxxxxxxxxx>
---
 arch/arm64/boot/dts/rockchip/rk3568-odroid-m1.dts | 14 ++++++++++++++
 1 file changed, 14 insertions(+)

diff --git a/arch/arm64/boot/dts/rockchip/rk3568-odroid-m1.dts b/arch/arm64/boot/dts/rockchip/rk3568-odroid-m1.dts
index 2f685c606bb9..59ecf868dbd0 100644
--- a/arch/arm64/boot/dts/rockchip/rk3568-odroid-m1.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3568-odroid-m1.dts
@@ -49,6 +49,13 @@ hdmi_con_in: endpoint {
 		};
 	};
 
+	ir-receiver {
+		compatible = "gpio-ir-receiver";
+		gpios = <&gpio0 RK_PC2 GPIO_ACTIVE_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&ir_receiver_pin>;
+	};
+
 	leds {
 		compatible = "gpio-leds";
 
@@ -519,6 +526,13 @@ fspi_dual_io_pins: fspi-dual-io-pins {
 		};
 	};
 
+	ir-receiver {
+		ir_receiver_pin: ir-receiver-pin {
+			/* external pullup to VCC3V3_SYS */
+			rockchip,pins = <0 RK_PC2 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
 	leds {
 		led_power_pin: led-power-pin {
 			rockchip,pins = <0 RK_PC6 RK_FUNC_GPIO &pcfg_pull_none>;
-- 
2.35.1




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux