From: Vladimir Lypak <vladimir.lypak@xxxxxxxxx>
Pronto-v3 is similar to pronto-v2. It requires two power domains, and it
requires the xo clock. It is used on the MSM8953 platform.
Signed-off-by: Vladimir Lypak <vladimir.lypak@xxxxxxxxx>
Signed-off-by: Sireesh Kodali <sireeshkodali1@xxxxxxxxx>
---
drivers/remoteproc/qcom_wcnss.c | 13 +++++++++++++
1 file changed, 13 insertions(+)
diff --git a/drivers/remoteproc/qcom_wcnss.c b/drivers/remoteproc/qcom_wcnss.c
index 68f37296b151..ff18bfae5eb6 100644
--- a/drivers/remoteproc/qcom_wcnss.c
+++ b/drivers/remoteproc/qcom_wcnss.c
@@ -141,6 +141,18 @@ static const struct wcnss_data pronto_v2_data = {
.num_vregs = 1,
};
+static const struct wcnss_data pronto_v3_data = {
+ .pmu_offset = 0x1004,
+ .spare_offset = 0x1088,
+
+ .pd_names = { "mx", "cx" },
+ .vregs = (struct wcnss_vreg_info[]) {
+ { "vddpx", 1800000, 1800000, 0 },
+ },
+ .num_pd_vregs = 2,
+ .num_vregs = 1,
+};
+
static int wcnss_load(struct rproc *rproc, const struct firmware *fw)
{
struct qcom_wcnss *wcnss = (struct qcom_wcnss *)rproc->priv;
@@ -675,6 +687,7 @@ static const struct of_device_id wcnss_of_match[] = {
{ .compatible = "qcom,riva-pil", &riva_data },
{ .compatible = "qcom,pronto-v1-pil", &pronto_v1_data },
{ .compatible = "qcom,pronto-v2-pil", &pronto_v2_data },
+ { .compatible = "qcom,pronto-v3-pil", &pronto_v3_data },
{ },
};
MODULE_DEVICE_TABLE(of, wcnss_of_match);
--
2.37.3
