On 28/09/2022 19:52, Aradhya Bhatia wrote: > Add 3rd "port" property for am625-dss. > This port represents the output from the 2nd OLDI TX (OLDI TX 1) latched > onto the first video port (VP0) from the DSS controller on AM625 SOC. > > Signed-off-by: Aradhya Bhatia <a-bhatia1@xxxxxx> > --- > .../bindings/display/ti/ti,am65x-dss.yaml | 18 +++++++++++++++++- > 1 file changed, 17 insertions(+), 1 deletion(-) > > diff --git a/Documentation/devicetree/bindings/display/ti/ti,am65x-dss.yaml b/Documentation/devicetree/bindings/display/ti/ti,am65x-dss.yaml > index 6bbce921479d..99576c6ec108 100644 > --- a/Documentation/devicetree/bindings/display/ti/ti,am65x-dss.yaml > +++ b/Documentation/devicetree/bindings/display/ti/ti,am65x-dss.yaml > @@ -82,13 +82,18 @@ properties: > port@0: > $ref: /schemas/graph.yaml#/properties/port > description: > - The DSS OLDI output port node form video port 1 > + The DSS OLDI output port node form video port 1 (OLDI TX 0). > > port@1: > $ref: /schemas/graph.yaml#/properties/port > description: > The DSS DPI output port node from video port 2 > > + port@2: > + $ref: /schemas/graph.yaml#/properties/port > + description: > + The DSS OLDI output port node form video port 1 (OLDI TX 1). > + > ti,am65x-oldi-io-ctrl: > $ref: "/schemas/types.yaml#/definitions/phandle" > description: > @@ -104,6 +109,17 @@ properties: > Input memory (from main memory to dispc) bandwidth limit in > bytes per second > > +if: Entire if: block is usually put under allOf:, so when the list of conditions grow, you do not need to change indentation. With the change: Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx> Best regards, Krzysztof
