Add device tree node for pm8226 GPIOs and support for the Samsung Galaxy Tab 4 10.1 (SM-T530) tablet which is based on apq8026. Changes in v6: - Set status as last property in nodes - Pad register addresses to 8 hex digits Changes in v5: - Rename pm8226-regulators node to fix issue reported by make dtbs_check Changes in v4: - Move delete-node to memory-region - Move usb-switch node to blsp_i2c4 Changes in v3: - Fix sdhc_2 bus width - Reorder includes Changes in v2: - Change codename to matisse-wifi - Remove msm-id from device dts - Rename pm8226 gpio node Matti Lehtimäki (3): ARM: dts: qcom: pm8226: Add node for the GPIOs dt-bindings: arm: qcom: Document samsung,matisse-wifi device ARM: dts: qcom: Add support for Samsung Galaxy Tab 4 10.1 (SM-T530) .../devicetree/bindings/arm/qcom.yaml | 1 + arch/arm/boot/dts/Makefile | 1 + .../dts/qcom-apq8026-samsung-matisse-wifi.dts | 453 ++++++++++++++++++ arch/arm/boot/dts/qcom-pm8226.dtsi | 10 + 4 files changed, 465 insertions(+) create mode 100644 arch/arm/boot/dts/qcom-apq8026-samsung-matisse-wifi.dts -- 2.34.1
