The MSM8226 pinctrl driver supports input-enable, blsp_i2c4, blsp_uart4
and sdc3 functions and DTS already uses it:
qcom-msm8226-samsung-s3ve3g.dtb: pinctrl@fd510000: 'blsp1-i2c1', 'blsp1-i2c2', 'blsp1-i2c3', 'blsp1-i2c4', 'blsp1-i2c5' ...
qcom-apq8026-lg-lenok.dtb: pinctrl@fd510000: touch-state: 'oneOf' conditional failed, one must be fixed:
'input-enable' does not match any of the regexes: 'pinctrl-[0-9]+'
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
Reviewed-by: Bjorn Andersson <andersson@xxxxxxxxxx>
---
.../bindings/pinctrl/qcom,msm8226-pinctrl.yaml | 10 ++++------
1 file changed, 4 insertions(+), 6 deletions(-)
diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,msm8226-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,msm8226-pinctrl.yaml
index a64e2dbb0972..9c2dbc1e31fe 100644
--- a/Documentation/devicetree/bindings/pinctrl/qcom,msm8226-pinctrl.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/qcom,msm8226-pinctrl.yaml
@@ -79,9 +79,10 @@ $defs:
Specify the alternative function to be configured for the specified
pins. Functions are only valid for gpio pins.
enum: [ gpio, cci_i2c0, blsp_uim1, blsp_uim2, blsp_uim3, blsp_uim5,
- blsp_i2c1, blsp_i2c2, blsp_i2c3, blsp_i2c5, blsp_spi1,
+ blsp_i2c1, blsp_i2c2, blsp_i2c3, blsp_i2c4, blsp_i2c5, blsp_spi1,
blsp_spi2, blsp_spi3, blsp_spi5, blsp_uart1, blsp_uart2,
- blsp_uart3, blsp_uart5, cam_mclk0, cam_mclk1, wlan ]
+ blsp_uart3, blsp_uart4, blsp_uart5, cam_mclk0, cam_mclk1, sdc3,
+ wlan ]
drive-strength:
enum: [2, 4, 6, 8, 10, 12, 14, 16]
@@ -90,13 +91,10 @@ $defs:
Selects the drive strength for the specified pins, in mA.
bias-pull-down: true
-
bias-pull-up: true
-
bias-disable: true
-
+ input-enable: true
output-high: true
-
output-low: true
required:
--
2.34.1
