qup-i2c devices on sc7280 are clocked with a fixed clock (19.2 MHz) Though qup-i2c does not support DVFS, it still needs to vote for a performance state on 'CX' to satisfy the 19.2 Mhz clock frequency requirement. Use 'required-opps' to pass this information from device tree, and also add the power-domains property to specify the CX power-domain. Signed-off-by: Rajendra Nayak <quic_rjendra@xxxxxxxxxxx> --- arch/arm64/boot/dts/qcom/sc7280.dtsi | 32 ++++++++++++++++++++++++++++ 1 file changed, 32 insertions(+) diff --git a/arch/arm64/boot/dts/qcom/sc7280.dtsi b/arch/arm64/boot/dts/qcom/sc7280.dtsi index 212580316d3e..c7c14bbc0023 100644 --- a/arch/arm64/boot/dts/qcom/sc7280.dtsi +++ b/arch/arm64/boot/dts/qcom/sc7280.dtsi @@ -967,6 +967,8 @@ <&aggre1_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>; interconnect-names = "qup-core", "qup-config", "qup-memory"; + power-domains = <&rpmhpd SC7280_CX>; + required-opps = <&rpmhpd_opp_low_svs>; dmas = <&gpi_dma0 0 0 QCOM_GPI_I2C>, <&gpi_dma0 1 0 QCOM_GPI_I2C>; dma-names = "tx", "rx"; @@ -1025,6 +1027,8 @@ <&aggre1_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>; interconnect-names = "qup-core", "qup-config", "qup-memory"; + power-domains = <&rpmhpd SC7280_CX>; + required-opps = <&rpmhpd_opp_low_svs>; dmas = <&gpi_dma0 0 1 QCOM_GPI_I2C>, <&gpi_dma0 1 1 QCOM_GPI_I2C>; dma-names = "tx", "rx"; @@ -1083,6 +1087,8 @@ <&aggre1_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>; interconnect-names = "qup-core", "qup-config", "qup-memory"; + power-domains = <&rpmhpd SC7280_CX>; + required-opps = <&rpmhpd_opp_low_svs>; dmas = <&gpi_dma0 0 2 QCOM_GPI_I2C>, <&gpi_dma0 1 2 QCOM_GPI_I2C>; dma-names = "tx", "rx"; @@ -1141,6 +1147,8 @@ <&aggre1_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>; interconnect-names = "qup-core", "qup-config", "qup-memory"; + power-domains = <&rpmhpd SC7280_CX>; + required-opps = <&rpmhpd_opp_low_svs>; dmas = <&gpi_dma0 0 3 QCOM_GPI_I2C>, <&gpi_dma0 1 3 QCOM_GPI_I2C>; dma-names = "tx", "rx"; @@ -1199,6 +1207,8 @@ <&aggre1_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>; interconnect-names = "qup-core", "qup-config", "qup-memory"; + power-domains = <&rpmhpd SC7280_CX>; + required-opps = <&rpmhpd_opp_low_svs>; dmas = <&gpi_dma0 0 4 QCOM_GPI_I2C>, <&gpi_dma0 1 4 QCOM_GPI_I2C>; dma-names = "tx", "rx"; @@ -1257,6 +1267,8 @@ <&aggre1_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>; interconnect-names = "qup-core", "qup-config", "qup-memory"; + power-domains = <&rpmhpd SC7280_CX>; + required-opps = <&rpmhpd_opp_low_svs>; dmas = <&gpi_dma0 0 5 QCOM_GPI_I2C>, <&gpi_dma0 1 5 QCOM_GPI_I2C>; dma-names = "tx", "rx"; @@ -1315,6 +1327,8 @@ <&aggre1_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>; interconnect-names = "qup-core", "qup-config", "qup-memory"; + power-domains = <&rpmhpd SC7280_CX>; + required-opps = <&rpmhpd_opp_low_svs>; dmas = <&gpi_dma0 0 6 QCOM_GPI_I2C>, <&gpi_dma0 1 6 QCOM_GPI_I2C>; dma-names = "tx", "rx"; @@ -1373,6 +1387,8 @@ <&aggre1_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>; interconnect-names = "qup-core", "qup-config", "qup-memory"; + power-domains = <&rpmhpd SC7280_CX>; + required-opps = <&rpmhpd_opp_low_svs>; dmas = <&gpi_dma0 0 7 QCOM_GPI_I2C>, <&gpi_dma0 1 7 QCOM_GPI_I2C>; dma-names = "tx", "rx"; @@ -1466,6 +1482,8 @@ <&aggre2_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>; interconnect-names = "qup-core", "qup-config", "qup-memory"; + power-domains = <&rpmhpd SC7280_CX>; + required-opps = <&rpmhpd_opp_low_svs>; dmas = <&gpi_dma1 0 0 QCOM_GPI_I2C>, <&gpi_dma1 1 0 QCOM_GPI_I2C>; dma-names = "tx", "rx"; @@ -1524,6 +1542,8 @@ <&aggre2_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>; interconnect-names = "qup-core", "qup-config", "qup-memory"; + power-domains = <&rpmhpd SC7280_CX>; + required-opps = <&rpmhpd_opp_low_svs>; dmas = <&gpi_dma1 0 1 QCOM_GPI_I2C>, <&gpi_dma1 1 1 QCOM_GPI_I2C>; dma-names = "tx", "rx"; @@ -1582,6 +1602,8 @@ <&aggre2_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>; interconnect-names = "qup-core", "qup-config", "qup-memory"; + power-domains = <&rpmhpd SC7280_CX>; + required-opps = <&rpmhpd_opp_low_svs>; dmas = <&gpi_dma1 0 2 QCOM_GPI_I2C>, <&gpi_dma1 1 2 QCOM_GPI_I2C>; dma-names = "tx", "rx"; @@ -1640,6 +1662,8 @@ <&aggre2_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>; interconnect-names = "qup-core", "qup-config", "qup-memory"; + power-domains = <&rpmhpd SC7280_CX>; + required-opps = <&rpmhpd_opp_low_svs>; dmas = <&gpi_dma1 0 3 QCOM_GPI_I2C>, <&gpi_dma1 1 3 QCOM_GPI_I2C>; dma-names = "tx", "rx"; @@ -1698,6 +1722,8 @@ <&aggre2_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>; interconnect-names = "qup-core", "qup-config", "qup-memory"; + power-domains = <&rpmhpd SC7280_CX>; + required-opps = <&rpmhpd_opp_low_svs>; dmas = <&gpi_dma1 0 4 QCOM_GPI_I2C>, <&gpi_dma1 1 4 QCOM_GPI_I2C>; dma-names = "tx", "rx"; @@ -1756,6 +1782,8 @@ <&aggre2_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>; interconnect-names = "qup-core", "qup-config", "qup-memory"; + power-domains = <&rpmhpd SC7280_CX>; + required-opps = <&rpmhpd_opp_low_svs>; dmas = <&gpi_dma1 0 5 QCOM_GPI_I2C>, <&gpi_dma1 1 5 QCOM_GPI_I2C>; dma-names = "tx", "rx"; @@ -1814,6 +1842,8 @@ <&aggre2_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>; interconnect-names = "qup-core", "qup-config", "qup-memory"; + power-domains = <&rpmhpd SC7280_CX>; + required-opps = <&rpmhpd_opp_low_svs>; dmas = <&gpi_dma1 0 6 QCOM_GPI_I2C>, <&gpi_dma1 1 6 QCOM_GPI_I2C>; dma-names = "tx", "rx"; @@ -1872,6 +1902,8 @@ <&aggre2_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>; interconnect-names = "qup-core", "qup-config", "qup-memory"; + power-domains = <&rpmhpd SC7280_CX>; + required-opps = <&rpmhpd_opp_low_svs>; dmas = <&gpi_dma1 0 7 QCOM_GPI_I2C>, <&gpi_dma1 1 7 QCOM_GPI_I2C>; dma-names = "tx", "rx"; -- 2.17.1
