The MFG_BG3D is a gate to enable/disable clock output to the GPU, but the actual output is decided by multiple muxes; in particular: mfg_ck_fast_ref muxes between "slow" (top_mfg_core_tmp) and "fast" (MFGPLL) clock, while top_mfg_core_tmp muxes between the 26MHz clock and various system PLLs. The clock gate comes after all the muxes, so its parent is mfg_ck_fast_reg, not top_mfg_core_tmp. Reparent MFG_BG3D to the latter to match the hardware and add the CLK_SET_RATE_PARENT flag to it: this way we ensure propagating rate changes that are requested on MFG_BG3D along its entire clock tree. Fixes: 35016f10c0e5 ("clk: mediatek: Add MT8195 mfgcfg clock support") Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@xxxxxxxxxxxxx> Reviewed-by: Chen-Yu Tsai <wenst@xxxxxxxxxxxx> --- drivers/clk/mediatek/clk-mt8195-mfg.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/drivers/clk/mediatek/clk-mt8195-mfg.c b/drivers/clk/mediatek/clk-mt8195-mfg.c index 9411c556a5a9..c94cb71bd9b9 100644 --- a/drivers/clk/mediatek/clk-mt8195-mfg.c +++ b/drivers/clk/mediatek/clk-mt8195-mfg.c @@ -17,10 +17,12 @@ static const struct mtk_gate_regs mfg_cg_regs = { }; #define GATE_MFG(_id, _name, _parent, _shift) \ - GATE_MTK(_id, _name, _parent, &mfg_cg_regs, _shift, &mtk_clk_gate_ops_setclr) + GATE_MTK_FLAGS(_id, _name, _parent, &mfg_cg_regs, \ + _shift, &mtk_clk_gate_ops_setclr, \ + CLK_SET_RATE_PARENT) static const struct mtk_gate mfg_clks[] = { - GATE_MFG(CLK_MFG_BG3D, "mfg_bg3d", "top_mfg_core_tmp", 0), + GATE_MFG(CLK_MFG_BG3D, "mfg_bg3d", "mfg_ck_fast_ref", 0), }; static const struct mtk_clk_desc mfg_desc = { -- 2.37.2