Add the loongson2 thermal binding with DT schema format using json-schema. Signed-off-by: Yinbo Zhu <zhuyinbo@xxxxxxxxxxx> --- Change in v3: 1. Remove the sensor id. 2. Remove the interrupt-parent in thermal required property. 3. Update the thermal binding file name. 4. Fixup the commit log information. .../thermal/loongson,loongson2-thermal.yaml | 42 +++++++++++++++++++ 1 file changed, 42 insertions(+) create mode 100644 Documentation/devicetree/bindings/thermal/loongson,loongson2-thermal.yaml diff --git a/Documentation/devicetree/bindings/thermal/loongson,loongson2-thermal.yaml b/Documentation/devicetree/bindings/thermal/loongson,loongson2-thermal.yaml new file mode 100644 index 000000000000..65a10a7390a7 --- /dev/null +++ b/Documentation/devicetree/bindings/thermal/loongson,loongson2-thermal.yaml @@ -0,0 +1,42 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/thermal/loongson2-thermal.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Thermal sensors on loongson2 SoCs + +maintainers: + - zhanghongchen <zhanghongchen@xxxxxxxxxxx> + - Yinbo Zhu <zhuyinbo@xxxxxxxxxxx> + +properties: + compatible: + const: loongson,loongson2-thermal + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + "#thermal-sensor-cells": + const: 1 + +required: + - compatible + - reg + - interrupts + - '#thermal-sensor-cells' + +additionalProperties: false + +examples: + - | + thermal: thermal-sensor@1fe01500 { + compatible = "loongson,loongson2-thermal"; + reg = <0 0x1fe01500 0 0x30>; + interrupt-parent = <&liointc0>; + interrupts = <7 IRQ_TYPE_LEVEL_LOW>; + #thermal-sensor-cells = <1>; + }; -- 2.31.1