[PATCH 01/32] arm64: dts: qcom: ipq6018-cp01-c1: correct blspi1 pins

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



When BLSPI1 (originally SPI0, later renamed in commit f82c48d46852
("arm64: dts: qcom: ipq6018: correct QUP peripheral labels")) was added,
the device node lacked respective pin configuration assignment.   It
used also blsp0_spi function but that was probably the same mistake as
naming it SPI0.

Fixes: 5bf635621245 ("arm64: dts: ipq6018: Add a few device nodes")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
---
 arch/arm64/boot/dts/qcom/ipq6018-cp01-c1.dts | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/arch/arm64/boot/dts/qcom/ipq6018-cp01-c1.dts b/arch/arm64/boot/dts/qcom/ipq6018-cp01-c1.dts
index 1ba2eca33c7b..afc2dc79767d 100644
--- a/arch/arm64/boot/dts/qcom/ipq6018-cp01-c1.dts
+++ b/arch/arm64/boot/dts/qcom/ipq6018-cp01-c1.dts
@@ -37,6 +37,8 @@ &blsp1_i2c3 {
 
 &blsp1_spi1 {
 	cs-select = <0>;
+	pinctrl-0 = <&spi_0_pins>;
+	pinctrl-names = "default";
 	status = "okay";
 
 	flash@0 {
@@ -57,7 +59,7 @@ i2c_1_pins: i2c-1-pins {
 
 	spi_0_pins: spi-0-pins {
 		pins = "gpio38", "gpio39", "gpio40", "gpio41";
-		function = "blsp0_spi";
+		function = "blsp1_spi";
 		drive-strength = <8>;
 		bias-pull-down;
 	};
-- 
2.34.1




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux