Hi,
Thank you for the patch.
> +
> +properties:
> +
> + dma-coherent: true
> +
> + compatible:
> + enum:
> + - marvell,armada-375-pp2
> + - marvell,armada-7k-pp2
I double checked with armada-cp11x.dtsi and the driver. Please
s/marvell,armada-7k-pp2/marvell,armada-7k-pp22/ in all occurrences.
> +
> + reg:
> + minItems: 3
> + maxItems: 4
> +
> +examples:
> + - |
> + // For Armada 375 variant
> + #include <dt-bindings/interrupt-controller/mvebu-icu.h>
> + #include <dt-bindings/interrupt-controller/arm-gic.h>
> +
> + ethernet@f0000 {
> + interrupt-controller;
> + #interrupt-cells = <3>;
interrupt-controller and #interrupt-cells are not valid properties for
this controller.
> + compatible = "marvell,armada-375-pp2";
> + reg = <0xf0000 0xa000>,
> + <0xc0000 0x3060>,
> + <0xc4000 0x100>,
> + <0xc5000 0x100>;
> + clocks = <&gateclk 3>, <&gateclk 19>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> + clock-names = "pp_clk", "gop_clk";
> +
> + eth0: eth0@c4000 {
> + reg = <0xc4000>;
> + interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
> + port-id = <0>;
> + phy = <&phy0>;
> + phy-mode = "gmii";
> + };
> +
> + eth1: eth1@c5000 {
> + reg = <0xc5000>;
> + interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
> + port-id = <1>;
> + phy = <&phy3>;
> + phy-mode = "gmii";
> + };
> + };
> +
> + - |
> + // For Armada 7k/8k and Cn913x variants
> + #include <dt-bindings/interrupt-controller/mvebu-icu.h>
> + #include <dt-bindings/interrupt-controller/arm-gic.h>
> +
> + cpm_ethernet: ethernet@0 {
> + interrupt-controller;
> + #interrupt-cells = <3>;
interrupt-controller and #interrupt-cells are not valid properties for
this controller.
Best regards,
Marcin
