Add support for additional TX/RX queues along with RX flow classification support. Binding is extended to allow additional interrupts for additional TX/RX queues. Also dma-coherent is allowed as minor improvement. RX path optimisation is done by using page pool as preparations for future XDP support. Gerhard Engleder (6): dt-bindings: net: tsnep: Allow dma-coherent dt-bindings: net: tsnep: Allow additional interrupts tsnep: Move interrupt from device to queue tsnep: Support multiple TX/RX queue pairs tsnep: Add EtherType RX flow classification support tsnep: Use page pool for RX .../bindings/net/engleder,tsnep.yaml | 39 +- drivers/net/ethernet/engleder/Kconfig | 1 + drivers/net/ethernet/engleder/Makefile | 2 +- drivers/net/ethernet/engleder/tsnep.h | 47 ++- drivers/net/ethernet/engleder/tsnep_ethtool.c | 38 ++ drivers/net/ethernet/engleder/tsnep_hw.h | 13 +- drivers/net/ethernet/engleder/tsnep_main.c | 356 +++++++++++++----- drivers/net/ethernet/engleder/tsnep_rxnfc.c | 281 ++++++++++++++ 8 files changed, 662 insertions(+), 115 deletions(-) create mode 100644 drivers/net/ethernet/engleder/tsnep_rxnfc.c -- 2.30.2
