On Thu, Sep 22, 2022 at 7:07 AM Naresh Solanki <naresh.solanki@xxxxxxxxxxxxx> wrote: > > From: Marcello Sylvester Bauer <sylv@xxxxxxx> > > Add Devicetree binding documentation for Maxim MAX6639 temperature > monitor with PWM fan-speed controller. > > Signed-off-by: Marcello Sylvester Bauer <sylv@xxxxxxx> > Signed-off-by: Naresh Solanki <Naresh.Solanki@xxxxxxxxxxxxx> > --- > .../bindings/hwmon/maxim,max6639.yaml | 112 ++++++++++++++++++ > 1 file changed, 112 insertions(+) > create mode 100644 Documentation/devicetree/bindings/hwmon/maxim,max6639.yaml > > diff --git a/Documentation/devicetree/bindings/hwmon/maxim,max6639.yaml b/Documentation/devicetree/bindings/hwmon/maxim,max6639.yaml > new file mode 100644 > index 000000000000..c845fb989af2 > --- /dev/null > +++ b/Documentation/devicetree/bindings/hwmon/maxim,max6639.yaml > @@ -0,0 +1,112 @@ > +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) > +%YAML 1.2 > +--- > + > +$id: http://devicetree.org/schemas/hwmon/maxim,max6639.yaml# > +$schema: http://devicetree.org/meta-schemas/core.yaml# > + > +title: Maxim max6639 > + > +maintainers: > + - Roland Stigge <stigge@xxxxxxxxx> > + > +description: | > + The MAX6639 is a 2-channel temperature monitor with dual, automatic, PWM > + fan-speed controller. It monitors its own temperature and one external > + diode-connected transistor or the temperatures of two external diode-connected > + transistors, typically available in CPUs, FPGAs, or GPUs. > + > + Datasheets: > + https://datasheets.maximintegrated.com/en/ds/MAX6639-MAX6639F.pdf > + > +properties: > + compatible: > + enum: > + - maxim,max6639 > + > + reg: > + maxItems: 1 > + > + '#address-cells': > + const: 1 > + > + '#size-cells': > + const: 0 > + > +required: > + - compatible > + - reg > + - "fan@0" > + - "fan@1" Why are both fan children required? The driver doesn't care and uses the default settings if not present. > + > +additionalProperties: false > + > +patternProperties: > + "^fan@[0-1]$": > + type: object > + description: | > + Represents the two fans and their specific configuration. > + > + properties: > + reg: > + description: | > + The fan number. > + items: > + minimum: 0 > + maximum: 1 > + > + pwm-polarity: > + $ref: /schemas/types.yaml#/definitions/uint32 > + enum: [0, 1] > + default: 1 > + description: > + PWM output is low at 100% duty cycle when this bit is set to zero. PWM > + output is high at 100% duty cycle when this bit is set to 1. > + > + pulses-per-revolution: > + $ref: /schemas/types.yaml#/definitions/uint32 > + enum: [1, 2, 3, 4] > + default: 2 > + description: > + Value specifying the number of pulses per revolution of the controlled > + FAN. > + > + maxim,rpm-range: > + $ref: /schemas/types.yaml#/definitions/uint32 > + enum: [2000, 4000, 8000, 16000] > + default: 4000 > + description: > + Scales the tachometer counter by setting the maximum (full-scale) value > + of the RPM range for max6639. > + > + required: > + - reg > + > +examples: > + - | > + i2c { > + #address-cells = <1>; > + #size-cells = <0>; > + > + max6639@10 { > + compatible = "maxim,max6639"; > + reg = <0x10>; > + #address-cells = <1>; > + #size-cells = <0>; > + > + fan@0 { > + reg = <0x0>; > + pwm-polarity = <1>; > + pulses-per-revolution = <2>; > + maxim,rpm-range = <4000>; > + }; > + > + fan@1 { > + reg = <0x1>; > + pwm-polarity = <1>; > + pulses-per-revolution = <2>; > + maxim,rpm-range = <4000>; > + }; > + }; > + }; > +... > -- > 2.35.3 >