Re: [PATCH] arm64: dts: rockchip: Enable HDMI and GPU on quartz64-b

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi,

Am Freitag, 23. September 2022, 11:53:52 CEST schrieb Dan Johansen:
> 
> Den 23.09.2022 kl. 11.45 skrev Heiko Stuebner:
> > Hi,
> >
> > Am Donnerstag, 22. September 2022, 23:22:37 CEST schrieb Dan Johansen:
> >> This seems to be based against linux-next and not mainline. It fails to
> >> apply on mainline for me.
> > I would not expect things any other way though :-) .
> > I.e. in the current cycle everything new is of course targetting
> > v6.1 and the Quartz boards already saw some other changes.
> 
> Ah okay. I have misunderstood the submitting process then.
> 
> I was under the impression that a patch should always target the latest 
> -rc1, in this case 6.0-rc1.
> 
> I did not know that when you are at rc6/rc7 it's okay to target 
> linux-next without
> mentioning it.
> 
> Sorry for my noise.

no worries - just to clarify a bit more, the issue gets slightly
more complex :-) .

I.e. patches should always target the maintainer-branch you're expecting
them getting applied to. During the whole development cycle there is a
lot of movement happening in each maintainer tree, so targetting some
completely separate rc-kernel won't really make sense.

Most of the time targetting -rc1 might work in the beginning, but when
there are other changes already applied you need to take these into
account too.

Heiko


> >> Den 20.09.2022 kl. 16.34 skrev Nicolas Frattaroli:
> >>> This enables the GPU and HDMI output (including HDMI audio) on
> >>> the PINE64 Quartz64 Model B single board computer.
> >>>
> >>> Signed-off-by: Nicolas Frattaroli <frattaroli.nicolas@xxxxxxxxx>
> >>> ---
> >>>    .../boot/dts/rockchip/rk3566-quartz64-b.dts   | 60 +++++++++++++++++++
> >>>    1 file changed, 60 insertions(+)
> >>>
> >>> diff --git a/arch/arm64/boot/dts/rockchip/rk3566-quartz64-b.dts b/arch/arm64/boot/dts/rockchip/rk3566-quartz64-b.dts
> >>> index 0f623198970f..77b179cd20e7 100644
> >>> --- a/arch/arm64/boot/dts/rockchip/rk3566-quartz64-b.dts
> >>> +++ b/arch/arm64/boot/dts/rockchip/rk3566-quartz64-b.dts
> >>> @@ -4,6 +4,7 @@
> >>>    
> >>>    #include <dt-bindings/gpio/gpio.h>
> >>>    #include <dt-bindings/pinctrl/rockchip.h>
> >>> +#include <dt-bindings/soc/rockchip,vop2.h>
> >>>    #include "rk3566.dtsi"
> >>>    
> >>>    / {
> >>> @@ -28,6 +29,17 @@ gmac1_clkin: external-gmac1-clock {
> >>>    		#clock-cells = <0>;
> >>>    	};
> >>>    
> >>> +	hdmi-con {
> >>> +		compatible = "hdmi-connector";
> >>> +		type = "a";
> >>> +
> >>> +		port {
> >>> +			hdmi_con_in: endpoint {
> >>> +				remote-endpoint = <&hdmi_out_con>;
> >>> +			};
> >>> +		};
> >>> +	};
> >>> +
> >>>    	leds {
> >>>    		compatible = "gpio-leds";
> >>>    
> >>> @@ -183,6 +195,33 @@ &gmac1m1_clkinout
> >>>    	status = "okay";
> >>>    };
> >>>    
> >>> +&gpu {
> >>> +	mali-supply = <&vdd_gpu>;
> >>> +	status = "okay";
> >>> +};
> >>> +
> >>> +&hdmi {
> >>> +	avdd-0v9-supply = <&vdda0v9_image>;
> >>> +	avdd-1v8-supply = <&vcca1v8_image>;
> >>> +	status = "okay";
> >>> +};
> >>> +
> >>> +&hdmi_in {
> >>> +	hdmi_in_vp0: endpoint {
> >>> +		remote-endpoint = <&vp0_out_hdmi>;
> >>> +	};
> >>> +};
> >>> +
> >>> +&hdmi_out {
> >>> +	hdmi_out_con: endpoint {
> >>> +		remote-endpoint = <&hdmi_con_in>;
> >>> +	};
> >>> +};
> >>> +
> >>> +&hdmi_sound {
> >>> +	status = "okay";
> >>> +};
> >>> +
> >>>    &i2c0 {
> >>>    	status = "okay";
> >>>    
> >>> @@ -456,6 +495,10 @@ &i2c5 {
> >>>    	status = "disabled";
> >>>    };
> >>>    
> >>> +&i2s0_8ch {
> >>> +	status = "okay";
> >>> +};
> >>> +
> >>>    &i2s1_8ch {
> >>>    	pinctrl-names = "default";
> >>>    	pinctrl-0 = <&i2s1m0_sclktx
> >> The above part does not seem to exist in the current mainline (rc6) git
> >> repo.
> > which is of course already in linux-next, so this
> > patch just applied nicely.
> >
> >
> > Heiko
> >
> >>> @@ -677,3 +720,20 @@ &usb_host0_ehci {
> >>>    &usb_host0_ohci {
> >>>    	status = "okay";
> >>>    };
> >>> +
> >>> +&vop {
> >>> +	assigned-clocks = <&cru DCLK_VOP0>, <&cru DCLK_VOP1>;
> >>> +	assigned-clock-parents = <&pmucru PLL_HPLL>, <&cru PLL_VPLL>;
> >>> +	status = "okay";
> >>> +};
> >>> +
> >>> +&vop_mmu {
> >>> +	status = "okay";
> >>> +};
> >>> +
> >>> +&vp0 {
> >>> +	vp0_out_hdmi: endpoint@ROCKCHIP_VOP2_EP_HDMI0 {
> >>> +		reg = <ROCKCHIP_VOP2_EP_HDMI0>;
> >>> +		remote-endpoint = <&hdmi_in_vp0>;
> >>> +	};
> >>> +};
> >
> >
> >
> >
> > _______________________________________________
> > Linux-rockchip mailing list
> > Linux-rockchip@xxxxxxxxxxxxxxxxxxx
> > http://lists.infradead.org/mailman/listinfo/linux-rockchip
> 







[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux