Re: [PATCH] arm64: dts: rockchip: Enable HDMI and GPU on quartz64-b

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



This seems to be based against linux-next and not mainline. It fails to apply on mainline for me.

Den 20.09.2022 kl. 16.34 skrev Nicolas Frattaroli:
This enables the GPU and HDMI output (including HDMI audio) on
the PINE64 Quartz64 Model B single board computer.

Signed-off-by: Nicolas Frattaroli <frattaroli.nicolas@xxxxxxxxx>
---
  .../boot/dts/rockchip/rk3566-quartz64-b.dts   | 60 +++++++++++++++++++
  1 file changed, 60 insertions(+)

diff --git a/arch/arm64/boot/dts/rockchip/rk3566-quartz64-b.dts b/arch/arm64/boot/dts/rockchip/rk3566-quartz64-b.dts
index 0f623198970f..77b179cd20e7 100644
--- a/arch/arm64/boot/dts/rockchip/rk3566-quartz64-b.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3566-quartz64-b.dts
@@ -4,6 +4,7 @@
#include <dt-bindings/gpio/gpio.h>
  #include <dt-bindings/pinctrl/rockchip.h>
+#include <dt-bindings/soc/rockchip,vop2.h>
  #include "rk3566.dtsi"
/ {
@@ -28,6 +29,17 @@ gmac1_clkin: external-gmac1-clock {
  		#clock-cells = <0>;
  	};
+ hdmi-con {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_con_in: endpoint {
+				remote-endpoint = <&hdmi_out_con>;
+			};
+		};
+	};
+
  	leds {
  		compatible = "gpio-leds";
@@ -183,6 +195,33 @@ &gmac1m1_clkinout
  	status = "okay";
  };
+&gpu {
+	mali-supply = <&vdd_gpu>;
+	status = "okay";
+};
+
+&hdmi {
+	avdd-0v9-supply = <&vdda0v9_image>;
+	avdd-1v8-supply = <&vcca1v8_image>;
+	status = "okay";
+};
+
+&hdmi_in {
+	hdmi_in_vp0: endpoint {
+		remote-endpoint = <&vp0_out_hdmi>;
+	};
+};
+
+&hdmi_out {
+	hdmi_out_con: endpoint {
+		remote-endpoint = <&hdmi_con_in>;
+	};
+};
+
+&hdmi_sound {
+	status = "okay";
+};
+
  &i2c0 {
  	status = "okay";
@@ -456,6 +495,10 @@ &i2c5 {
  	status = "disabled";
  };
+&i2s0_8ch {
+	status = "okay";
+};
+
  &i2s1_8ch {
  	pinctrl-names = "default";
  	pinctrl-0 = <&i2s1m0_sclktx
The above part does not seem to exist in the current mainline (rc6) git repo.
@@ -677,3 +720,20 @@ &usb_host0_ehci {
  &usb_host0_ohci {
  	status = "okay";
  };
+
+&vop {
+	assigned-clocks = <&cru DCLK_VOP0>, <&cru DCLK_VOP1>;
+	assigned-clock-parents = <&pmucru PLL_HPLL>, <&cru PLL_VPLL>;
+	status = "okay";
+};
+
+&vop_mmu {
+	status = "okay";
+};
+
+&vp0 {
+	vp0_out_hdmi: endpoint@ROCKCHIP_VOP2_EP_HDMI0 {
+		reg = <ROCKCHIP_VOP2_EP_HDMI0>;
+		remote-endpoint = <&hdmi_in_vp0>;
+	};
+};
--
Kind regards
*Dan Johansen*
Project lead of the *Manjaro ARM* project
Manjaro-ARM <https://manjaro.org>



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux