From: Quentin Schulz <quentin.schulz@xxxxxxxxxxxxxxxxxxxxx>
This event code represents the firmware source to use at boot.
Value 0 means using "standard" firmware source, value 1 means using
"alternative" firmware source.
For example, some hardware has the ability to force the BOOTROM to load
the bootloader from a secondary firmware source (say SD card) instead of
trying with the standard first and then the secondary. This event allows
the userspace to know which firmware source was requested *in hardware*.
Signed-off-by: Quentin Schulz <quentin.schulz@xxxxxxxxxxxxxxxxxxxxx>
---
include/linux/mod_devicetable.h | 2 +-
include/uapi/linux/input-event-codes.h | 3 ++-
2 files changed, 3 insertions(+), 2 deletions(-)
diff --git a/include/linux/mod_devicetable.h b/include/linux/mod_devicetable.h
index 549590e9c644..009e71376a61 100644
--- a/include/linux/mod_devicetable.h
+++ b/include/linux/mod_devicetable.h
@@ -326,7 +326,7 @@ struct pcmcia_device_id {
#define INPUT_DEVICE_ID_LED_MAX 0x0f
#define INPUT_DEVICE_ID_SND_MAX 0x07
#define INPUT_DEVICE_ID_FF_MAX 0x7f
-#define INPUT_DEVICE_ID_SW_MAX 0x10
+#define INPUT_DEVICE_ID_SW_MAX 0x11
#define INPUT_DEVICE_ID_PROP_MAX 0x1f
#define INPUT_DEVICE_ID_MATCH_BUS 1
diff --git a/include/uapi/linux/input-event-codes.h b/include/uapi/linux/input-event-codes.h
index dff8e7f17074..8cd2b58c81d7 100644
--- a/include/uapi/linux/input-event-codes.h
+++ b/include/uapi/linux/input-event-codes.h
@@ -917,7 +917,8 @@
#define SW_MUTE_DEVICE 0x0e /* set = device disabled */
#define SW_PEN_INSERTED 0x0f /* set = pen inserted */
#define SW_MACHINE_COVER 0x10 /* set = cover closed */
-#define SW_MAX 0x10
+#define SW_BOOT_ALT 0x11 /* set = alternative boot firmware source */
+#define SW_MAX 0x11
#define SW_CNT (SW_MAX+1)
/*
--
2.37.3
