Hi Sebastian, On Sat, Oct 11, 2014 at 05:41:08PM +0200, Sebastian Hesselbarth wrote: > This patch set catches up with latest Berlin improvements provided > by Antoine - in particular SATA PHY support and AHCI generic for > Berlin BG2. > > Marvell BSP code for BG2 suggests more differences between the two > PHY revisions found on BG2 and BG2Q, but the only important one seems > to be the PHY_BASE used in AHCI vendor-specific registers. I also > confirmed that power_off does indeed power off the PHY on BG2, too > (It wasn't very clear in BSP code). > > Anyway, I have tested this on BG2-based Sony NSZ-GS7 and attached > SATA HDD is successfully detected and partitions are displayed. > > The patches are currently based on next-20141009 and I plan to resend > once v3.18-rc1 drops. A branch based on next-20141009 with this patches > applied can be found on > > git://git.infradead.org/users/hesselba/linux-berlin.git devel/bg2-sata-v1 > > Patch 1 prepares phy-berlin-sata to support different PHY_BASE addresses > by moving the constant to driver private data. > > Patches 2 and 3 add a new compatible to driver and DT documentation that > reflects the differences between BG2Q and BG2 SATA PHY. > > Patches 4 and 5 finally add DT nodes to both Berlin2 SoC dtsi and Sony > NSZ-GS7 board DT file. SATA plug on NSZ-GS7 is unpopulated but can be > very easily equipped with SATA receptable and some 0402 caps. I decided > to enable SATA by default although not all users may populate it. Apart for the little comment, you can add: Acked-by : Antoine Tenart <antoine.tenart@xxxxxxxxxxxxxxxxxx> -- Antoine Ténart, Free Electrons Embedded Linux, Kernel and Android engineering http://free-electrons.com -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
