Hi Khiem-san,
On Thu, Oct 16, 2014 at 02:43:05PM +0900, Khiem Nguyen wrote:
> Hi,
>
> On 10/16/2014 2:20 PM, Simon Horman wrote:
> > On Wed, Oct 15, 2014 at 05:59:37PM +0900, Yoshihiro Kaneko wrote:
> >> From: Koji Matsuoka <koji.matsuoka.xm@xxxxxxxxxxx>
> >>
> >> Signed-off-by: Koji Matsuoka <koji.matsuoka.xm@xxxxxxxxxxx>
> >> Signed-off-by: Yoshihiro Kaneko <ykaneko0929@xxxxxxxxx>
> >
> > Acked-by: Simon Horman <horms+renesas@xxxxxxxxxxxx>
> >
> > Tejun, could you consider picking up this change?
>
> Uhmm, R8A7793 SoC hadn't been supported in upstream Linux kernel yet.
> So, is it still OK to take this patch now ?
Yes, I think so. Mainline support for the r8a7793 is in the pipeline
and by adding (trivial) driver support before hand the drivers will
be able to be used when the SoC code lands.
This is consistent with how other are being handled for the r8a7793.
> >> ---
> >>
> >> This patch is against for-next branch of Tejun's libata repo.
> >>
> >> v2 [Yoshihiro Kaneko]
> >> * Update the binding documentation
> >>
> >> Documentation/devicetree/bindings/ata/sata_rcar.txt | 3 ++-
> >> drivers/ata/sata_rcar.c | 5 +++++
> >> 2 files changed, 7 insertions(+), 1 deletion(-)
> >>
> >> diff --git a/Documentation/devicetree/bindings/ata/sata_rcar.txt b/Documentation/devicetree/bindings/ata/sata_rcar.txt
> >> index 1e61113..74b1130 100644
> >> --- a/Documentation/devicetree/bindings/ata/sata_rcar.txt
> >> +++ b/Documentation/devicetree/bindings/ata/sata_rcar.txt
> >> @@ -4,7 +4,8 @@ Required properties:
> >> - compatible : should contain one of the following:
> >> - "renesas,sata-r8a7779" for R-Car H1
> >> - "renesas,sata-r8a7790" for R-Car H2
> >> - - "renesas,sata-r8a7791" for R-Car M2
> >> + - "renesas,sata-r8a7791" for R-Car M2-W
> >> + - "renesas,sata-r8a7793" for R-Car M2-N
> >> - reg : address and length of the SATA registers;
> >> - interrupts : must consist of one interrupt specifier.
> >>
> >> diff --git a/drivers/ata/sata_rcar.c b/drivers/ata/sata_rcar.c
> >> index 61eb6d7..6f8ed8e 100644
> >> --- a/drivers/ata/sata_rcar.c
> >> +++ b/drivers/ata/sata_rcar.c
> >> @@ -841,6 +841,10 @@ static struct of_device_id sata_rcar_match[] = {
> >> .compatible = "renesas,sata-r8a7791",
> >> .data = (void *)RCAR_GEN2_SATA
> >> },
> >> + {
> >> + .compatible = "renesas,sata-r8a7793",
> >> + .data = (void *)RCAR_GEN2_SATA
> >> + },
> >> { },
> >> };
> >> MODULE_DEVICE_TABLE(of, sata_rcar_match);
> >> @@ -850,6 +854,7 @@ static const struct platform_device_id sata_rcar_id_table[] = {
> >> { "sata-r8a7779", RCAR_GEN1_SATA },
> >> { "sata-r8a7790", RCAR_GEN2_SATA },
> >> { "sata-r8a7791", RCAR_GEN2_SATA },
> >> + { "sata-r8a7793", RCAR_GEN2_SATA },
> >> { },
> >> };
> >> MODULE_DEVICE_TABLE(platform, sata_rcar_id_table);
> >> --
> >> 1.9.1
> >>
> > --
> > To unsubscribe from this list: send the line "unsubscribe linux-sh" in
> > the body of a message to majordomo@xxxxxxxxxxxxxxx
> > More majordomo info at http://vger.kernel.org/majordomo-info.html
> >
>
> --
> Best regards,
> KHIEM Nguyen
>
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
