From: Marcel Ziswiler <marcel.ziswiler@xxxxxxxxxxx> This series is an assortment of USB dual-role specific commits as follows: Introduce USBC_DET GPIO based USB dual-role aka device/host switching. Move USB VBUS supply from single carrier board to module level device tree. This pin is as per Colibri module family standard. Specify USBH_PEN GPIO being active-low rather than active-high (cosmetic only). Remove spurious debounce property from linux,extcon-usb-gpio. That commit is actually for Colibri iMX7. Marcel Ziswiler (3): arm: dts: colibri-imx6: move vbus-supply to module level device tree arm: dts: colibri-imx6: specify usbh_pen gpio being active-low arm: dts: imx7-colibri: remove spurious debounce property Philippe Schenker (1): arm: dts: colibri-imx6: usb dual-role switching arch/arm/boot/dts/imx6dl-colibri-aster.dts | 1 - arch/arm/boot/dts/imx6dl-colibri-eval-v3.dts | 1 - arch/arm/boot/dts/imx6dl-colibri-iris.dts | 1 - arch/arm/boot/dts/imx6qdl-colibri.dtsi | 22 ++++++++++++++++---- arch/arm/boot/dts/imx7-colibri.dtsi | 1 - 5 files changed, 18 insertions(+), 8 deletions(-) -- 2.36.1
