[PATCH v7 3/3] cap11xx: support for irq-active-high option

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




Some applications need to use the irq-active-high push-pull option.
This allows it be enabled in the device tree child node.

Signed-off-by: Matt Ranostay <mranostay@xxxxxxxxx>
---
 Documentation/devicetree/bindings/input/cap11xx.txt | 4 ++++
 drivers/input/keyboard/cap11xx.c                    | 8 ++++++++
 2 files changed, 12 insertions(+)

diff --git a/Documentation/devicetree/bindings/input/cap11xx.txt b/Documentation/devicetree/bindings/input/cap11xx.txt
index 61d20d8..7d0a300 100644
--- a/Documentation/devicetree/bindings/input/cap11xx.txt
+++ b/Documentation/devicetree/bindings/input/cap11xx.txt
@@ -28,6 +28,10 @@ Optional properties:
 				Valid values are 1, 2, 4, and 8.
 				By default, a gain of 1 is set.
 
+	microchip,irq-active-high:	By default the interrupt pin is active low
+				open drain. This property allows using the active
+				high push-pull output.
+
 	linux,keycodes:		Specifies an array of numeric keycode values to
 				be used for the channels. If this property is
 				omitted, KEY_A, KEY_B, etc are used as
diff --git a/drivers/input/keyboard/cap11xx.c b/drivers/input/keyboard/cap11xx.c
index 91effe5..0ae7d2f 100644
--- a/drivers/input/keyboard/cap11xx.c
+++ b/drivers/input/keyboard/cap11xx.c
@@ -45,6 +45,7 @@
 #define CAP11XX_REG_STANDBY_SENSITIVITY	0x42
 #define CAP11XX_REG_STANDBY_THRESH	0x43
 #define CAP11XX_REG_CONFIG2		0x44
+#define CAP11XX_REG_CONFIG2_ALT_POL	BIT(6)
 #define CAP11XX_REG_SENSOR_BASE_CNT(X)	(0x50 + (X))
 #define CAP11XX_REG_SENSOR_CALIB	(0xb1 + (X))
 #define CAP11XX_REG_SENSOR_CALIB_LSB1	0xb9
@@ -253,6 +254,13 @@ static int cap11xx_i2c_probe(struct i2c_client *i2c_client,
 			dev_err(dev, "Invalid sensor-gain value %d\n", gain32);
 	}
 
+	if (of_property_read_bool(node, "microchip,irq-active-high")) {
+		error = regmap_update_bits(priv->regmap, CAP11XX_REG_CONFIG2,
+					   CAP11XX_REG_CONFIG2_ALT_POL, 0);
+		if (error)
+			return error;
+	}
+
 	/* Provide some useful defaults */
 	for (i = 0; i < cap->num_channels; i++)
 		priv->keycodes[i] = KEY_A + i;
-- 
1.9.1

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]
  Powered by Linux