On Fri, Sep 16, 2022 at 12:06 PM Alessandro Carminati
<alessandro.carminati@xxxxxxxxx> wrote:
>
> The Quartz64 board is built upon Rockchip RK3566.
> Rockchip RK3566 has two combo phys.
> The first connects USB3 and SATA ctrl1, and the second PCIe lane and SATA
> ctrl2.
> The second combo phy is hardwired to the PCIe slot, where for the first,
> the hardware on the board provides both the USB3 connector and the SATA
> connector.
> This DT allows the users to switch the combo phy to the SATA connector.
Good Evening,
NACK to this whole series. Neither works correctly in the hardware as
is, and USB3 was decided to be left enabled as the SATA port will be
removed completely in the next revision.
Very Respectfully,
Peter Geis
>
> Signed-off-by: Alessandro Carminati <alessandro.carminati@xxxxxxxxx>
> ---
> arch/arm64/boot/dts/rockchip/Makefile | 1 +
> arch/arm64/boot/dts/rockchip/rk3566-quartz64-a-sata.dts | 9 +++++++++
> 2 files changed, 10 insertions(+)
> create mode 100644 arch/arm64/boot/dts/rockchip/rk3566-quartz64-a-sata.dts
>
> diff --git a/arch/arm64/boot/dts/rockchip/Makefile b/arch/arm64/boot/dts/rockchip/Makefile
> index 8c843f6fc3cc..1d5dd91d1a34 100644
> --- a/arch/arm64/boot/dts/rockchip/Makefile
> +++ b/arch/arm64/boot/dts/rockchip/Makefile
> @@ -60,6 +60,7 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399pro-rock-pi-n10.dtb
> dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-pinenote-v1.1.dtb
> dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-pinenote-v1.2.dtb
> dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-quartz64-a-usb3.dts
> +dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-quartz64-a-sata.dts
> dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-quartz64-b.dtb
> dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-roc-pc.dtb
> dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-soquartz-cm4.dtb
> diff --git a/arch/arm64/boot/dts/rockchip/rk3566-quartz64-a-sata.dts b/arch/arm64/boot/dts/rockchip/rk3566-quartz64-a-sata.dts
> new file mode 100644
> index 000000000000..8620df7ec01e
> --- /dev/null
> +++ b/arch/arm64/boot/dts/rockchip/rk3566-quartz64-a-sata.dts
> @@ -0,0 +1,9 @@
> +// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
> +
> +/dts-v1/;
> +
> +#include "rk3566-quartz64-a.dtsi"
> +
> +&sata1 {
> + status = "okay";
> +};
> --
> 2.34.1
>
>
> _______________________________________________
> Linux-rockchip mailing list
> Linux-rockchip@xxxxxxxxxxxxxxxxxxx
> http://lists.infradead.org/mailman/listinfo/linux-rockchip
