On Fri, 16 Sep 2022 10:30:56 -0500, Rob Herring wrote: > Convert the hid-over-i2c binding to DT schema format. The supplies should > probably be specific to a specific device, but it seems they are already > in use otherwise. 'wakeup-source' is added as it was not explicitly > documented. > > There's a few warnings for undocumented properties 'vcc-supply' and > 'reset-gpios'. Those remain as they probably should have a specific > compatible as well. > > Signed-off-by: Rob Herring <robh@xxxxxxxxxx> > --- > .../bindings/input/hid-over-i2c.txt | 46 ----------- > .../bindings/input/hid-over-i2c.yaml | 78 +++++++++++++++++++ > 2 files changed, 78 insertions(+), 46 deletions(-) > delete mode 100644 Documentation/devicetree/bindings/input/hid-over-i2c.txt > create mode 100644 Documentation/devicetree/bindings/input/hid-over-i2c.yaml > My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check' on your patch (DT_CHECKER_FLAGS is new in v5.13): yamllint warnings/errors: dtschema/dtc warnings/errors: Documentation/devicetree/bindings/input/hid-over-i2c.example.dts:23.13-26: Warning (reg_format): /example-0/hid@2c:reg: property has invalid length (4 bytes) (#address-cells == 1, #size-cells == 1) Documentation/devicetree/bindings/input/hid-over-i2c.example.dtb: Warning (pci_device_reg): Failed prerequisite 'reg_format' Documentation/devicetree/bindings/input/hid-over-i2c.example.dtb: Warning (pci_device_bus_num): Failed prerequisite 'reg_format' Documentation/devicetree/bindings/input/hid-over-i2c.example.dtb: Warning (simple_bus_reg): Failed prerequisite 'reg_format' Documentation/devicetree/bindings/input/hid-over-i2c.example.dtb: Warning (i2c_bus_reg): Failed prerequisite 'reg_format' Documentation/devicetree/bindings/input/hid-over-i2c.example.dtb: Warning (spi_bus_reg): Failed prerequisite 'reg_format' doc reference errors (make refcheckdocs): See https://patchwork.ozlabs.org/patch/ This check can fail if there are any dependencies. The base for a patch series is generally the most recent rc1. If you already ran 'make dt_binding_check' and didn't see the above error(s), then make sure 'yamllint' is installed and dt-schema is up to date: pip3 install dtschema --upgrade Please check and re-submit.
