Hi Alessandro,
Am Freitag, 16. September 2022, 14:52:55 CEST schrieb Alessandro Carminati:
> Fix esisting "No underscores in node names" general rule, and prepare for
> new board versions.
if there is an "and" in your patch message, this always is a strong
indication that things want to be multiple patches, doing things separately.
- regulator node names
- and the separation + move
at least.
> Signed-off-by: Alessandro Carminati <alessandro.carminati@xxxxxxxxx>
> ---
> arch/arm64/boot/dts/rockchip/Makefile | 2 +-
> ...-quartz64-a.dts => rk3566-quartz64-a.dtsi} | 27 ++++++++-----------
> .../dts/rockchip/rk3566-quartz64-a.usb3.dts | 9 +++++++
> 3 files changed, 21 insertions(+), 17 deletions(-)
> rename arch/arm64/boot/dts/rockchip/{rk3566-quartz64-a.dts => rk3566-quartz64-a.dtsi} (97%)
> create mode 100644 arch/arm64/boot/dts/rockchip/rk3566-quartz64-a.usb3.dts
>
> diff --git a/arch/arm64/boot/dts/rockchip/Makefile b/arch/arm64/boot/dts/rockchip/Makefile
> index ef79a672804a..97ec6c156346 100644
> --- a/arch/arm64/boot/dts/rockchip/Makefile
> +++ b/arch/arm64/boot/dts/rockchip/Makefile
> @@ -59,7 +59,7 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-sapphire-excavator.dtb
> dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399pro-rock-pi-n10.dtb
> dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-pinenote-v1.1.dtb
> dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-pinenote-v1.2.dtb
> -dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-quartz64-a.dtb
> +dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-quartz64-a.usb3.dtb
I don't think we're using dots to denote separation.
Just use another dash ("-").
> dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-quartz64-b.dtb
> dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-roc-pc.dtb
> dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-soquartz-cm4.dtb
> diff --git a/arch/arm64/boot/dts/rockchip/rk3566-quartz64-a.dts b/arch/arm64/boot/dts/rockchip/rk3566-quartz64-a.dtsi
> similarity index 97%
> rename from arch/arm64/boot/dts/rockchip/rk3566-quartz64-a.dts
> rename to arch/arm64/boot/dts/rockchip/rk3566-quartz64-a.dtsi
> index d943559b157c..ac3da5b2c1b2 100644
> --- a/arch/arm64/boot/dts/rockchip/rk3566-quartz64-a.dts
> +++ b/arch/arm64/boot/dts/rockchip/rk3566-quartz64-a.dtsi
> @@ -28,7 +28,7 @@ gmac1_clkin: external-gmac1-clock {
> #clock-cells = <0>;
> };
>
> - fan: gpio_fan {
> + fan: fan {
I do think "gpio-fan" with a dash might be nicer, as we don't
have an address that indicates which fan it is.
> compatible = "gpio-fan";
> gpios = <&gpio0 RK_PD5 GPIO_ACTIVE_HIGH>;
> gpio-fan,speed-map = <0 0
> @@ -38,7 +38,7 @@ fan: gpio_fan {
> #cooling-cells = <2>;
> };
>
> - hdmi-con {
> + hdmi-connector {
> compatible = "hdmi-connector";
> type = "a";
>
> @@ -116,7 +116,7 @@ simple-audio-card,codec {
> };
> };
>
> - vcc12v_dcin: vcc12v_dcin {
> + vcc12v_dcin: vcc12v-dcin {
The newly agreed on scheme is to have "-regulator" at the end
vcc12v_dcin: vcc12v-dcin-regulator {
would be the new name.
Heiko
