[PATCH 6/6] arm64: dts: qcom: sc8180x: Introduce Lenovo Flex 5G

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



From: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>

Introduce support for the Lenovo Flex 5G laptop, built on the Qualcomm
SC8180X platform. Supported peripherals includes keyboard, touchpad,
UFS storage, external USB and WiFi.

Signed-off-by: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
Signed-off-by: Vinod Koul <vkoul@xxxxxxxxxx>
---
 arch/arm64/boot/dts/qcom/Makefile             |   1 +
 .../boot/dts/qcom/sc8180x-lenovo-flex-5g.dts  | 590 ++++++++++++++++++
 2 files changed, 591 insertions(+)
 create mode 100644 arch/arm64/boot/dts/qcom/sc8180x-lenovo-flex-5g.dts

diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile
index f1c620bb078e..a9de6f50ca37 100644
--- a/arch/arm64/boot/dts/qcom/Makefile
+++ b/arch/arm64/boot/dts/qcom/Makefile
@@ -112,6 +112,7 @@ dtb-$(CONFIG_ARCH_QCOM)	+= sc7280-herobrine-villager-r1-lte.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sc7280-idp.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sc7280-idp2.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sc7280-crd-r3.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= sc8180x-lenovo-flex-5g.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sc8180x-primus.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sc8280xp-crd.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sc8280xp-lenovo-thinkpad-x13s.dtb
diff --git a/arch/arm64/boot/dts/qcom/sc8180x-lenovo-flex-5g.dts b/arch/arm64/boot/dts/qcom/sc8180x-lenovo-flex-5g.dts
new file mode 100644
index 000000000000..559a1fb6173f
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sc8180x-lenovo-flex-5g.dts
@@ -0,0 +1,590 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2017-2019, The Linux Foundation. All rights reserved.
+ * Copyright (c) 2020-2022, Linaro Limited
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/gpio-keys.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
+#include "sc8180x.dtsi"
+#include "sc8180x-pmics.dtsi"
+
+/ {
+	model = "Lenovo Flex 5G";
+	compatible = "lenovo,flex-5g", "qcom,sc8180x";
+
+	aliases {
+		serial0 = &uart13;
+	};
+
+	backlight: backlight {
+		compatible = "pwm-backlight";
+		pwms = <&pmc8180c_lpg 4 1000000>;
+		enable-gpios = <&pmc8180c_gpios 8 GPIO_ACTIVE_HIGH>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&bl_pwm_default_state>;
+	};
+
+	chosen {
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&hall_int_active_state>;
+
+		lid {
+			gpios = <&tlmm 121 GPIO_ACTIVE_LOW>;
+			linux,input-type = <EV_SW>;
+			linux,code = <SW_LID>;
+			wakeup-source;
+			wakeup-event-action = <EV_ACT_DEASSERTED>;
+		};
+	};
+
+	reserved-memory {
+		rmtfs_mem: rmtfs-region@85500000 {
+			compatible = "qcom,rmtfs-mem";
+			reg = <0x0 0x85500000 0x0 0x200000>;
+			no-map;
+
+			qcom,client-id = <1>;
+			qcom,vmid = <15>;
+		};
+
+		wlan_mem: wlan-region@8bc00000 {
+			reg = <0x0 0x8bc00000 0x0 0x180000>;
+			no-map;
+		};
+
+		mpss_mem: mpss-region@8d800000 {
+			reg = <0x0 0x8d800000 0x0 0x3000000>;
+			no-map;
+		};
+
+		adsp_mem: adsp-region@90800000 {
+			reg = <0x0 0x90800000 0x0 0x1c00000>;
+			no-map;
+		};
+
+		gpu_mem: gpu-region@98715000 {
+			reg = <0x0 0x98715000 0x0 0x2000>;
+			no-map;
+		};
+
+		cdsp_mem: cdsp-region@98900000 {
+			reg = <0x0 0x98900000 0x0 0x1400000>;
+			no-map;
+		};
+	};
+
+	vph_pwr: vph-pwr-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vph_pwr";
+		regulator-min-microvolt = <3700000>;
+		regulator-max-microvolt = <3700000>;
+	};
+
+	vreg_s4a_1p8: pm8150-s4 {
+		compatible = "regulator-fixed";
+		regulator-name = "vreg_s4a_1p8";
+
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+
+		regulator-always-on;
+		regulator-boot-on;
+
+		vin-supply = <&vph_pwr>;
+	};
+};
+
+&apps_rsc {
+	pmc8180-a-rpmh-regulators {
+		compatible = "qcom,pmc8180-rpmh-regulators";
+		qcom,pmic-id = "a";
+
+		vdd-s5-supply = <&vph_pwr>;
+		vdd-l7-l12-l14-l15-supply = <&vreg_s5a_2p0>;
+
+		vreg_s5a_2p0: smps5 {
+			regulator-min-microvolt = <2040000>;
+			regulator-max-microvolt = <2100000>;
+		};
+
+		vreg_l7a_1p8: ldo7 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l9a_1p3: ldo9 {
+			regulator-min-microvolt = <1296000>;
+			regulator-max-microvolt = <1304000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l12a_1p8: ldo12 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	pmc8180c-rpmh-regulators {
+		compatible = "qcom,pmc8180c-rpmh-regulators";
+		qcom,pmic-id = "c";
+
+		vdd-s6-supply = <&vph_pwr>;
+		vdd-l2-l3-supply = <&vreg_s6c_1p35>;
+		vdd-bob-supply = <&vph_pwr>;
+
+		vreg_s6c_1p35: smps6 {
+			regulator-min-microvolt = <1350000>;
+			regulator-max-microvolt = <1372000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l3c_1p2: ldo3 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l10c_3p3: ldo10 {
+			regulator-min-microvolt = <3000000>;
+			regulator-max-microvolt = <3312000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l11c_3p3: ldo11 {
+			regulator-min-microvolt = <3296000>;
+			regulator-max-microvolt = <3304000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_bob: bob {
+			regulator-min-microvolt = <3296000>;
+			regulator-max-microvolt = <3350000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	pmc8180-e-rpmh-regulators {
+		compatible = "qcom,pmc8180-rpmh-regulators";
+		qcom,pmic-id = "e";
+
+		vdd-s4-supply = <&vph_pwr>;
+		vdd-s5-supply = <&vph_pwr>;
+		vdd-l2-l10-supply = <&vreg_bob>;
+		vdd-l3-l4-l5-l18-supply = <&vreg_s4e_0p98>;
+		vdd-l7-l12-l14-l15-supply = <&vreg_s5e_2p05>;
+		vdd-l13-l16-l17-supply = <&vreg_bob>;
+
+		vreg_s4e_0p98: smps4 {
+			regulator-min-microvolt = <992000>;
+			regulator-max-microvolt = <992000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_s5e_2p05: smps5 {
+			regulator-min-microvolt = <2040000>;
+			regulator-max-microvolt = <2040000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l1e_0p75: ldo1 {
+			regulator-min-microvolt = <752000>;
+			regulator-max-microvolt = <752000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l5e_0p88: ldo5 {
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <880000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l7e_1p8: ldo7 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l10e_2p9: ldo10 {
+			regulator-min-microvolt = <2904000>;
+			regulator-max-microvolt = <2904000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l16e_3p0: ldo16 {
+			regulator-min-microvolt = <3072000>;
+			regulator-max-microvolt = <3072000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+};
+
+&dispcc {
+	status = "okay";
+};
+
+&gpu {
+	status = "okay";
+
+	zap-shader {
+		memory-region = <&gpu_mem>;
+		firmware-name = "qcom/sc8180x/qcdxkmsuc8180.mbn";
+	};
+};
+
+&i2c1 {
+	clock-frequency = <100000>;
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c1_active>, <&i2c1_hid_active>;
+
+	status = "okay";
+
+	hid@10 {
+		compatible = "hid-over-i2c";
+		reg = <0x10>;
+		hid-descr-addr = <0x1>;
+
+		interrupts-extended = <&tlmm 122 IRQ_TYPE_LEVEL_LOW>;
+	};
+};
+
+&i2c7 {
+	clock-frequency = <100000>;
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c7_active>, <&i2c7_hid_active>;
+
+	status = "okay";
+
+	hid@5 {
+		compatible = "hid-over-i2c";
+		reg = <0x5>;
+		hid-descr-addr = <0x20>;
+
+		interrupts-extended = <&tlmm 37 IRQ_TYPE_LEVEL_LOW>;
+	};
+
+	hid@2c {
+		compatible = "hid-over-i2c";
+		reg = <0x2c>;
+		hid-descr-addr = <0x20>;
+
+		interrupts-extended = <&tlmm 24 IRQ_TYPE_LEVEL_LOW>;
+	};
+};
+
+&mdss {
+	status = "okay";
+};
+
+&mdss_edp {
+	data-lanes = <0 1 2 3>;
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&edp_hpd_active>;
+
+	status = "okay";
+
+	aux-bus {
+		panel {
+			compatible = "edp-panel";
+			no-hpd;
+
+			backlight = <&backlight>;
+
+			ports {
+				port {
+					auo_b140han06_in: endpoint {
+						remote-endpoint = <&mdss_edp_out>;
+					};
+				};
+			};
+		};
+	};
+
+	ports {
+		port@1 {
+			reg = <1>;
+			mdss_edp_out: endpoint {
+				remote-endpoint = <&auo_b140han06_in>;
+			};
+		};
+	};
+};
+
+&pcie3 {
+	perst-gpio = <&tlmm 178 GPIO_ACTIVE_LOW>;
+	wake-gpio = <&tlmm 180 GPIO_ACTIVE_HIGH>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pcie3_default_state>;
+
+	status = "okay";
+};
+
+&pcie3_phy {
+	vdda-phy-supply = <&vreg_l5e_0p88>;
+	vdda-pll-supply = <&vreg_l3c_1p2>;
+
+	status = "okay";
+};
+
+&pmc8180c_lpg {
+	status = "okay";
+};
+
+&qupv3_id_0 {
+	status = "okay";
+};
+
+&qupv3_id_1 {
+	status = "okay";
+};
+
+&qupv3_id_2 {
+	status = "okay";
+};
+
+&remoteproc_adsp {
+	memory-region = <&adsp_mem>;
+	firmware-name = "qcom/sc8180x/qcadsp8180.mbn";
+
+	status = "okay";
+};
+
+&remoteproc_cdsp {
+	memory-region = <&cdsp_mem>;
+	firmware-name = "qcom/sc8180x/qccdsp8180.mbn";
+
+	status = "okay";
+};
+
+&remoteproc_mpss {
+	memory-region = <&mpss_mem>;
+	firmware-name = "qcom/sc8180x/qcmpss8180_nm.mbn";
+
+	status = "okay";
+};
+
+&uart13 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart13_state>;
+
+	status = "okay";
+
+	bluetooth {
+		compatible = "qcom,wcn3998-bt";
+
+		vddio-supply = <&vreg_s4a_1p8>;
+		vddxo-supply = <&vreg_l7a_1p8>;
+		vddrf-supply = <&vreg_l9a_1p3>;
+		vddch0-supply = <&vreg_l11c_3p3>;
+		max-speed = <3200000>;
+	};
+};
+
+&ufs_mem_hc {
+	reset-gpios = <&tlmm 190 GPIO_ACTIVE_LOW>;
+
+	vcc-supply = <&vreg_l10e_2p9>;
+	vcc-max-microamp = <155000>;
+
+	vccq2-supply = <&vreg_l7e_1p8>;
+	vccq2-max-microamp = <425000>;
+
+	status = "okay";
+};
+
+&ufs_mem_phy {
+	vdda-phy-supply = <&vreg_l5e_0p88>;
+	vdda-pll-supply = <&vreg_l3c_1p2>;
+
+	status = "okay";
+};
+
+&usb_prim_hsphy {
+	vdda-pll-supply = <&vreg_l5e_0p88>;
+	vdda18-supply = <&vreg_l12a_1p8>;
+	vdda33-supply = <&vreg_l16e_3p0>;
+
+	status = "okay";
+};
+
+&usb_prim_qmpphy {
+	vdda-phy-supply = <&vreg_l3c_1p2>;
+	vdda-pll-supply = <&vreg_l5e_0p88>;
+
+	status = "okay";
+};
+
+&usb_prim {
+	status = "okay";
+};
+
+&usb_prim_dwc3 {
+	dr_mode = "host";
+};
+
+&usb_sec_hsphy {
+	vdda-pll-supply = <&vreg_l5e_0p88>;
+	vdda18-supply = <&vreg_l12a_1p8>;
+	vdda33-supply = <&vreg_l16e_3p0>;
+
+	status = "okay";
+};
+
+&usb_sec_qmpphy {
+	vdda-phy-supply = <&vreg_l3c_1p2>;
+	vdda-pll-supply = <&vreg_l5e_0p88>;
+
+	status = "okay";
+};
+
+&usb_sec {
+	status = "okay";
+};
+
+&usb_sec_dwc3 {
+	dr_mode = "host";
+};
+
+&wifi {
+	memory-region = <&wlan_mem>;
+
+	vdd-0.8-cx-mx-supply = <&vreg_l1e_0p75>;
+	vdd-1.8-xo-supply = <&vreg_l7a_1p8>;
+	vdd-1.3-rfa-supply = <&vreg_l9a_1p3>;
+	vdd-3.3-ch0-supply = <&vreg_l11c_3p3>;
+	vdd-3.3-ch1-supply = <&vreg_l10c_3p3>;
+
+	status = "okay";
+};
+
+&xo_board_clk {
+	clock-frequency = <38400000>;
+};
+
+/* PINCTRL */
+
+&pmc8180c_gpios {
+	bl_pwm_default_state: bl-pwm-default-state {
+		en {
+			pins = "gpio8";
+			function = "normal";
+		};
+
+		pwm {
+			pins = "gpio10";
+			function = "func1";
+		};
+	};
+};
+
+&tlmm {
+	gpio-reserved-ranges = <0 4>, <47 4>, <126 4>;
+
+	edp_hpd_active: epd-hpd-active-state {
+		pins = "gpio10";
+		function = "edp_hot";
+	};
+
+	hall_int_active_state: hall-int-active-state {
+		pins = "gpio121";
+		function = "gpio";
+
+		input-enable;
+		bias-disable;
+	};
+
+	i2c1_active: i2c1-active-state {
+		pins = "gpio114", "gpio115";
+		function = "qup1";
+
+		bias-pull-up = <1>;
+		drive-strength = <2>;
+	};
+
+	i2c1_hid_active: i2c1-hid-active-state {
+		pins = "gpio122";
+		function = "gpio";
+
+		input-enable;
+		bias-pull-up;
+		drive-strength = <2>;
+	};
+
+	i2c7_active: i2c7-active-state {
+		pins = "gpio98", "gpio99";
+		function = "qup7";
+
+		bias-pull-up;
+		drive-strength = <2>;
+	};
+
+	i2c7_hid_active: i2c7-hid-active-state {
+		pins = "gpio37", "gpio24";
+		function = "gpio";
+
+		input-enable;
+		bias-pull-up;
+		drive-strength = <2>;
+	};
+
+	pcie3_default_state: pcie3-default-state {
+		clkreq {
+			pins = "gpio179";
+			function = "pci_e3";
+			bias-pull-up;
+		};
+
+		reset-n {
+			pins = "gpio178";
+			function = "gpio";
+
+			drive-strength = <2>;
+			output-low;
+			bias-pull-down;
+		};
+
+		wake-n {
+			pins = "gpio180";
+			function = "gpio";
+
+			drive-strength = <2>;
+			bias-pull-up;
+		};
+	};
+
+	uart13_state: uart13-state {
+		cts {
+			pins = "gpio43";
+			function = "qup13";
+			bias-pull-down;
+		};
+
+		rts-tx {
+			pins = "gpio44", "gpio45";
+			function = "qup13";
+			drive-strength = <2>;
+			bias-disable;
+		};
+
+		rx {
+			pins = "gpio46";
+			function = "qup13";
+			bias-pull-up;
+		};
+	};
+};
-- 
2.37.3




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux