Re: [PATCH v4 2/3] memory: omap-gpmc: add support for wait pin polarity

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Fri, 2022-09-16 at 11:55 +0300, Roger Quadros wrote:
> 
> On 15/09/2022 12:13, B. Niedermayr wrote:
> > From: Benedikt Niedermayr <benedikt.niedermayr@xxxxxxxxxxx>
> > 
> > The waitpin polarity can be configured via the WAITPIN<X>POLARITY bits
> > in the GPMC_CONFIG register. This is currently not supported by the
> > driver. This patch adds support for setting the required register bits
> > with the "gpmc,wait-pin-polarity" dt-property.
> > 
> > Signed-off-by: Benedikt Niedermayr <benedikt.niedermayr@xxxxxxxxxxx>
> > ---
> >  drivers/memory/omap-gpmc.c              | 22 ++++++++++++++++++++++
> >  include/linux/platform_data/gpmc-omap.h |  6 ++++++
> >  2 files changed, 28 insertions(+)
> 
> ./scripts/checkpatch.pl --strict
Sorry, I wasn't aware of that option.
It's my first patchseries I try to get upstream.

But thanks for the review and feedback!

> 
> -------------------------------------------------------------
> 0002-memory-omap-gpmc-add-support-for-wait-pin-polarity.patch
> -------------------------------------------------------------
> CHECK: Alignment should match open parenthesis
> #42: FILE: drivers/memory/omap-gpmc.c:1899:
> +			pr_err("%s: invalid wait-pin-polarity (pin: %d, polarity: %d)\n",
> +				__func__, p->wait_pin, p->wait_pin_polarity);
> 
> CHECK: Please don't use multiple blank lines
> #47: FILE: drivers/memory/omap-gpmc.c:1904:
> +
> +
> 
> CHECK: Blank lines aren't necessary after an open brace '{'
> #55: FILE: drivers/memory/omap-gpmc.c:1995:
>  	if (!of_property_read_u32(np, "gpmc,wait-pin", &p->wait_pin)) {
> +
> 
> CHECK: Alignment should match open parenthesis
> #58: FILE: drivers/memory/omap-gpmc.c:1998:
> +		of_property_read_u32(np,
> +			"gpmc,wait-pin-polarity",
> 
> total: 0 errors, 0 warnings, 4 checks, 58 lines checked
> 
> NOTE: For some of the reported defects, checkpatch may be able to
>       mechanically convert to the typical style using --fix or --fix-inplace.
> 
> > diff --git a/drivers/memory/omap-gpmc.c b/drivers/memory/omap-gpmc.c
> > index e3674a15b934..66dd7dd80653 100644
> > --- a/drivers/memory/omap-gpmc.c
> > +++ b/drivers/memory/omap-gpmc.c
> > @@ -132,6 +132,7 @@
> >  #define GPMC_CONFIG_DEV_SIZE	0x00000002
> >  #define GPMC_CONFIG_DEV_TYPE	0x00000003
> >  
> > +#define GPMC_CONFIG_WAITPINPOLARITY(pin)	(BIT(pin) << 8)
> >  #define GPMC_CONFIG1_WRAPBURST_SUPP     (1 << 31)
> >  #define GPMC_CONFIG1_READMULTIPLE_SUPP  (1 << 30)
> >  #define GPMC_CONFIG1_READTYPE_ASYNC     (0 << 29)
> > @@ -1881,6 +1882,21 @@ int gpmc_cs_program_settings(int cs, struct gpmc_settings *p)
> >  
> >  	gpmc_cs_write_reg(cs, GPMC_CS_CONFIG1, config1);
> >  
> > +	if (p->wait_on_read || p->wait_on_write) {
> > +		config1 = gpmc_read_reg(GPMC_CONFIG);
> > +
> > +		if (p->wait_pin_polarity == WAITPINPOLARITY_ACTIVE_LOW)
> > +			config1 &= ~GPMC_CONFIG_WAITPINPOLARITY(p->wait_pin);
> > +		else if (p->wait_pin_polarity == WAITPINPOLARITY_ACTIVE_HIGH)
> > +			config1 |= GPMC_CONFIG_WAITPINPOLARITY(p->wait_pin);
> > +		else if (p->wait_pin_polarity != WAITPINPOLARITY_DEFAULT)
> > +			pr_err("%s: invalid wait-pin-polarity (pin: %d, polarity: %d)\n",
> > +				__func__, p->wait_pin, p->wait_pin_polarity);
> > +
> > +		gpmc_write_reg(GPMC_CONFIG, config1);
> > +	}
> > +
> > +
> >  	return 0;
> >  }
> >  
> > @@ -1981,6 +1997,12 @@ void gpmc_read_settings_dt(struct device_node *np, struct gpmc_settings *p)
> >  	}
> >  
> >  	if (!of_property_read_u32(np, "gpmc,wait-pin", &p->wait_pin)) {
> > +
> > +		p->wait_pin_polarity = WAITPINPOLARITY_DEFAULT;
> > +		of_property_read_u32(np,
> > +			"gpmc,wait-pin-polarity",
> > +			&p->wait_pin_polarity);
> > +
> >  		p->wait_on_read = of_property_read_bool(np,
> >  							"gpmc,wait-on-read");
> >  		p->wait_on_write = of_property_read_bool(np,
> > diff --git a/include/linux/platform_data/gpmc-omap.h b/include/linux/platform_data/gpmc-omap.h
> > index c9cc4e32435d..c46c28069c31 100644
> > --- a/include/linux/platform_data/gpmc-omap.h
> > +++ b/include/linux/platform_data/gpmc-omap.h
> > @@ -136,6 +136,11 @@ struct gpmc_device_timings {
> >  #define GPMC_MUX_AAD			1	/* Addr-Addr-Data multiplex */
> >  #define GPMC_MUX_AD			2	/* Addr-Data multiplex */
> >  
> > +/* Wait pin polarity values */
> > +#define WAITPINPOLARITY_DEFAULT -1
> > +#define WAITPINPOLARITY_ACTIVE_LOW 0
> > +#define WAITPINPOLARITY_ACTIVE_HIGH 1
> > +
> >  struct gpmc_settings {
> >  	bool burst_wrap;	/* enables wrap bursting */
> >  	bool burst_read;	/* enables read page/burst mode */
> > @@ -149,6 +154,7 @@ struct gpmc_settings {
> >  	u32 device_width;	/* device bus width (8 or 16 bit) */
> >  	u32 mux_add_data;	/* multiplex address & data */
> >  	u32 wait_pin;		/* wait-pin to be used */
> > +	u32 wait_pin_polarity;	/* wait-pin polarity */
> >  };
> >  
> >  /* Data for each chip select */
> 
> cheers,
> -roger

cheers,
benedikt





[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux