These PMICs all contain a GPIO controller. Now that the binding for this
variant is documented, wire up the controller in the device tree.
Signed-off-by: Samuel Holland <samuel@xxxxxxxxxxxx>
---
Changes in v3:
- Remove "ldo" pinctrl children from new nodes
arch/arm/boot/dts/axp22x.dtsi | 6 ++++++
arch/arm/boot/dts/axp809.dtsi | 7 +++++++
2 files changed, 13 insertions(+)
diff --git a/arch/arm/boot/dts/axp22x.dtsi b/arch/arm/boot/dts/axp22x.dtsi
index a020c12b2884..f79650afd0a7 100644
--- a/arch/arm/boot/dts/axp22x.dtsi
+++ b/arch/arm/boot/dts/axp22x.dtsi
@@ -67,6 +67,12 @@ battery_power_supply: battery-power {
status = "disabled";
};
+ axp_gpio: gpio {
+ compatible = "x-powers,axp221-gpio";
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
regulators {
/* Default work frequency for buck regulators */
x-powers,dcdc-freq = <3000>;
diff --git a/arch/arm/boot/dts/axp809.dtsi b/arch/arm/boot/dts/axp809.dtsi
index ab8e5f2d9246..d134d4c00bd8 100644
--- a/arch/arm/boot/dts/axp809.dtsi
+++ b/arch/arm/boot/dts/axp809.dtsi
@@ -50,4 +50,11 @@ &axp809 {
compatible = "x-powers,axp809";
interrupt-controller;
#interrupt-cells = <1>;
+
+ axp_gpio: gpio {
+ compatible = "x-powers,axp809-gpio",
+ "x-powers,axp221-gpio";
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
};
--
2.35.1
