From: Lad Prabhakar <prabhakar.mahadev-lad.rj@xxxxxxxxxxxxxx>
In preparation to re-use the RZ/G2UL SMARC SoM and carrier DTS/I with the
RZ/Five add /omit-if-no-ref/ keyword to pinmux entries as the support for
RZ/Five SMARC EVK will be gradually added.
Once we have full blown support for RZ/Five SMARC EVK we can get rid of
the /omit-if-no-ref/ keyword.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@xxxxxxxxxxxxxx>
---
.../boot/dts/renesas/rzg2ul-smarc-pinfunction.dtsi | 13 +++++++++++++
arch/arm64/boot/dts/renesas/rzg2ul-smarc-som.dtsi | 7 +++++++
2 files changed, 20 insertions(+)
diff --git a/arch/arm64/boot/dts/renesas/rzg2ul-smarc-pinfunction.dtsi b/arch/arm64/boot/dts/renesas/rzg2ul-smarc-pinfunction.dtsi
index bd8bc858c28c..2b400100472e 100644
--- a/arch/arm64/boot/dts/renesas/rzg2ul-smarc-pinfunction.dtsi
+++ b/arch/arm64/boot/dts/renesas/rzg2ul-smarc-pinfunction.dtsi
@@ -12,12 +12,14 @@ &pinctrl {
pinctrl-0 = <&sound_clk_pins>;
pinctrl-names = "default";
+ /omit-if-no-ref/
can0_pins: can0 {
pinmux = <RZG2L_PORT_PINMUX(1, 1, 3)>, /* TX */
<RZG2L_PORT_PINMUX(1, 2, 3)>; /* RX */
};
#if (SW_ET0_EN_N)
+ /omit-if-no-ref/
can0-stb-hog {
gpio-hog;
gpios = <RZG2L_GPIO(2, 2) GPIO_ACTIVE_HIGH>;
@@ -26,12 +28,14 @@ can0-stb-hog {
};
#endif
+ /omit-if-no-ref/
can1_pins: can1 {
pinmux = <RZG2L_PORT_PINMUX(2, 0, 3)>, /* TX */
<RZG2L_PORT_PINMUX(2, 1, 3)>; /* RX */
};
#if (SW_ET0_EN_N)
+ /omit-if-no-ref/
can1-stb-hog {
gpio-hog;
gpios = <RZG2L_GPIO(2, 3) GPIO_ACTIVE_HIGH>;
@@ -40,11 +44,13 @@ can1-stb-hog {
};
#endif
+ /omit-if-no-ref/
i2c0_pins: i2c0 {
pins = "RIIC0_SDA", "RIIC0_SCL";
input-enable;
};
+ /omit-if-no-ref/
i2c1_pins: i2c1 {
pins = "RIIC1_SDA", "RIIC1_SCL";
input-enable;
@@ -55,6 +61,7 @@ scif0_pins: scif0 {
<RZG2L_PORT_PINMUX(6, 3, 6)>; /* RxD */
};
+ /omit-if-no-ref/
sd1-pwr-en-hog {
gpio-hog;
gpios = <RZG2L_GPIO(0, 3) GPIO_ACTIVE_HIGH>;
@@ -62,6 +69,7 @@ sd1-pwr-en-hog {
line-name = "sd1_pwr_en";
};
+ /omit-if-no-ref/
sdhi1_pins: sd1 {
sd1_data {
pins = "SD1_DATA0", "SD1_DATA1", "SD1_DATA2", "SD1_DATA3";
@@ -78,6 +86,7 @@ sd1_mux {
};
};
+ /omit-if-no-ref/
sdhi1_pins_uhs: sd1_uhs {
sd1_data_uhs {
pins = "SD1_DATA0", "SD1_DATA1", "SD1_DATA2", "SD1_DATA3";
@@ -94,11 +103,13 @@ sd1_mux_uhs {
};
};
+ /omit-if-no-ref/
sound_clk_pins: sound_clk {
pins = "AUDIO_CLK1", "AUDIO_CLK2";
input-enable;
};
+ /omit-if-no-ref/
ssi1_pins: ssi1 {
pinmux = <RZG2L_PORT_PINMUX(3, 0, 2)>, /* BCK */
<RZG2L_PORT_PINMUX(3, 1, 2)>, /* RCK */
@@ -106,12 +117,14 @@ ssi1_pins: ssi1 {
<RZG2L_PORT_PINMUX(3, 3, 2)>; /* RXD */
};
+ /omit-if-no-ref/
usb0_pins: usb0 {
pinmux = <RZG2L_PORT_PINMUX(5, 0, 1)>, /* VBUS */
<RZG2L_PORT_PINMUX(5, 2, 1)>, /* OVC */
<RZG2L_PORT_PINMUX(5, 3, 1)>; /* OTG_ID */
};
+ /omit-if-no-ref/
usb1_pins: usb1 {
pinmux = <RZG2L_PORT_PINMUX(5, 4, 5)>, /* OVC */
<RZG2L_PORT_PINMUX(6, 0, 1)>; /* VBUS */
diff --git a/arch/arm64/boot/dts/renesas/rzg2ul-smarc-som.dtsi b/arch/arm64/boot/dts/renesas/rzg2ul-smarc-som.dtsi
index 2a0feb53f0dc..a0a41a062f55 100644
--- a/arch/arm64/boot/dts/renesas/rzg2ul-smarc-som.dtsi
+++ b/arch/arm64/boot/dts/renesas/rzg2ul-smarc-som.dtsi
@@ -132,10 +132,12 @@ &ostm2 {
};
&pinctrl {
+ /omit-if-no-ref/
adc_pins: adc {
pinmux = <RZG2L_PORT_PINMUX(6, 2, 1)>; /* ADC_TRG */
};
+ /omit-if-no-ref/
eth0_pins: eth0 {
pinmux = <RZG2L_PORT_PINMUX(4, 5, 1)>, /* ET0_LINKSTA */
<RZG2L_PORT_PINMUX(4, 3, 1)>, /* ET0_MDC */
@@ -154,6 +156,7 @@ eth0_pins: eth0 {
<RZG2L_PORT_PINMUX(4, 1, 1)>; /* ET0_RXD3 */
};
+ /omit-if-no-ref/
eth1_pins: eth1 {
pinmux = <RZG2L_PORT_PINMUX(10, 4, 1)>, /* ET1_LINKSTA */
<RZG2L_PORT_PINMUX(10, 2, 1)>, /* ET1_MDC */
@@ -172,6 +175,7 @@ eth1_pins: eth1 {
<RZG2L_PORT_PINMUX(10, 0, 1)>; /* ET1_RXD3 */
};
+ /omit-if-no-ref/
sdhi0_emmc_pins: sd0emmc {
sd0_emmc_data {
pins = "SD0_DATA0", "SD0_DATA1", "SD0_DATA2", "SD0_DATA3",
@@ -190,6 +194,7 @@ sd0_emmc_rst {
};
};
+ /omit-if-no-ref/
sdhi0_pins: sd0 {
sd0_data {
pins = "SD0_DATA0", "SD0_DATA1", "SD0_DATA2", "SD0_DATA3";
@@ -206,6 +211,7 @@ sd0_mux {
};
};
+ /omit-if-no-ref/
sdhi0_pins_uhs: sd0_uhs {
sd0_data_uhs {
pins = "SD0_DATA0", "SD0_DATA1", "SD0_DATA2", "SD0_DATA3";
@@ -222,6 +228,7 @@ sd0_mux_uhs {
};
};
+ /omit-if-no-ref/
spi1_pins: rspi1 {
pinmux = <RZG2L_PORT_PINMUX(4, 0, 2)>, /* CK */
<RZG2L_PORT_PINMUX(4, 1, 2)>, /* MOSI */
--
2.25.1
