On 14/09/2022 20:59, Alessandro Carminati wrote:
> The Quartz64 board is built upon Rockchip RK3566.
> Rockchip RK3566 has two combo phys.
> The first connects USB3 and SATA ctrl1, and the second PCIe lane and SATA
> ctrl2.
> The second combo phy is hardwired to the PCIe slot, where for the first,
> the hardware on the board provides both the USB3 connector and the SATA
> connector.
> This DT allows the users to switch the combo phy to the SATA connector.
>
> Signed-off-by: Alessandro Carminati <alessandro.carminati@xxxxxxxxx>
> ---
> .../dts/rockchip/rk3566-quartz64-a.sata.dts | 839 ++++++++++++++++++
> 1 file changed, 839 insertions(+)
> create mode 100644 arch/arm64/boot/dts/rockchip/rk3566-quartz64-a.sata.dts
>
> diff --git a/arch/arm64/boot/dts/rockchip/rk3566-quartz64-a.sata.dts b/arch/arm64/boot/dts/rockchip/rk3566-quartz64-a.sata.dts
> new file mode 100644
> index 000000000000..6ac21b729be7
> --- /dev/null
> +++ b/arch/arm64/boot/dts/rockchip/rk3566-quartz64-a.sata.dts
> @@ -0,0 +1,839 @@
> +// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
> +
> +/dts-v1/;
> +
> +#include <dt-bindings/gpio/gpio.h>
> +#include <dt-bindings/pinctrl/rockchip.h>
> +#include <dt-bindings/soc/rockchip,vop2.h>
> +#include "rk3566.dtsi"
> +
> +/ {
> + model = "Pine64 RK3566 Quartz64-A Board";
> + compatible = "pine64,quartz64-a", "rockchip,rk3566";
> +
> + aliases {
> + ethernet0 = &gmac1;
> + mmc0 = &sdmmc0;
> + mmc1 = &sdhci;
> + };
> +
> + chosen: chosen {
> + stdout-path = "serial2:1500000n8";
> + };
> +
> + gmac1_clkin: external-gmac1-clock {
> + compatible = "fixed-clock";
> + clock-frequency = <125000000>;
> + clock-output-names = "gmac1_clkin";
> + #clock-cells = <0>;
> + };
> +
> + fan: gpio_fan {
No underscores in node names. Node name just "fan"
> + compatible = "gpio-fan";
> + gpios = <&gpio0 RK_PD5 GPIO_ACTIVE_HIGH>;
> + gpio-fan,speed-map = <0 0
> + 4500 1>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&fan_en_h>;
> + #cooling-cells = <2>;
> + };
> +
> + hdmi-con {
Node name: connector
> + compatible = "hdmi-connector";
> + type = "a";
> +
> + port {
> + hdmi_con_in: endpoint {
> + remote-endpoint = <&hdmi_out_con>;
> + };
> + };
> + };
> +
> + leds {
> + compatible = "gpio-leds";
> +
> + led-work {
> + label = "work-led";
> + default-state = "off";
> + gpios = <&gpio0 RK_PD3 GPIO_ACTIVE_HIGH>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&work_led_enable_h>;
> + retain-state-suspended;
> + };
> +
> + led-diy {
> + label = "diy-led";
> + default-state = "on";
> + gpios = <&gpio0 RK_PD4 GPIO_ACTIVE_HIGH>;
> + linux,default-trigger = "heartbeat";
> + pinctrl-names = "default";
> + pinctrl-0 = <&diy_led_enable_h>;
> + retain-state-suspended;
> + };
> + };
> +
> + rk817-sound {
> + compatible = "simple-audio-card";
> + simple-audio-card,format = "i2s";
> + simple-audio-card,name = "Analog RK817";
> + simple-audio-card,mclk-fs = <256>;
> +
> + simple-audio-card,cpu {
> + sound-dai = <&i2s1_8ch>;
> + };
> +
> + simple-audio-card,codec {
> + sound-dai = <&rk817>;
> + };
> + };
> +
> + sdio_pwrseq: sdio-pwrseq {
> + compatible = "mmc-pwrseq-simple";
> + clocks = <&rk817 1>;
> + clock-names = "ext_clock";
> + pinctrl-names = "default";
> + pinctrl-0 = <&wifi_enable_h>;
> + post-power-on-delay-ms = <100>;
> + power-off-delay-us = <5000000>;
> + reset-gpios = <&gpio2 RK_PC2 GPIO_ACTIVE_LOW>;
> + };
> +
> + spdif_dit: spdif-dit {
> + compatible = "linux,spdif-dit";
> + #sound-dai-cells = <0>;
> + };
> +
> + spdif_sound: spdif-sound {
> + compatible = "simple-audio-card";
> + simple-audio-card,name = "SPDIF";
> +
> + simple-audio-card,cpu {
> + sound-dai = <&spdif>;
> + };
> +
> + simple-audio-card,codec {
> + sound-dai = <&spdif_dit>;
> + };
> + };
> +
> + vcc12v_dcin: vcc12v_dcin {
No underscores in node names, generic node name, so at least with
regulator prefix or suffix.
> + compatible = "regulator-fixed";
> + regulator-name = "vcc12v_dcin";
> + regulator-always-on;
> + regulator-boot-on;
> + regulator-min-microvolt = <12000000>;
> + regulator-max-microvolt = <12000000>;
> + };
> +
> + /* vbus feeds the rk817 usb input.
> + * With no battery attached, also feeds vcc_bat+
> + * via ON/OFF_BAT jumper
> + */
> + vbus: vbus {
Ditto
> + compatible = "regulator-fixed";
> + regulator-name = "vbus";
> + regulator-always-on;
> + regulator-boot-on;
> + regulator-min-microvolt = <5000000>;
> + regulator-max-microvolt = <5000000>;
> + vin-supply = <&vcc12v_dcin>;
> + };
> +
> + vcc3v3_pcie_p: vcc3v3-pcie-p-regulator {
And here you have suffix...
> + compatible = "regulator-fixed";
> + enable-active-high;
> + gpio = <&gpio0 RK_PC6 GPIO_ACTIVE_HIGH>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&pcie_enable_h>;
> + regulator-name = "vcc3v3_pcie_p";
> + regulator-min-microvolt = <3300000>;
> + regulator-max-microvolt = <3300000>;
> + vin-supply = <&vcc_3v3>;
> + };
> +
> + vcc5v0_usb: vcc5v0_usb {
Ditto
> + compatible = "regulator-fixed";
> + regulator-name = "vcc5v0_usb";
> + regulator-always-on;
> + regulator-boot-on;
> + regulator-min-microvolt = <5000000>;
> + regulator-max-microvolt = <5000000>;
> + vin-supply = <&vcc12v_dcin>;
> + };
> +
> + /* all four ports are controlled by one gpio
> + * the host ports are sourced from vcc5v0_usb
> + * the otg port is sourced from vcc5v0_midu
> + */
> + vcc5v0_usb20_host: vcc5v0_usb20_host {
and in other places as well
> + compatible = "regulator-fixed";
> + enable-active-high;
> + gpio = <&gpio4 RK_PB5 GPIO_ACTIVE_HIGH>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&vcc5v0_usb20_host_en>;
> + regulator-name = "vcc5v0_usb20_host";
> + regulator-min-microvolt = <5000000>;
> + regulator-max-microvolt = <5000000>;
> + vin-supply = <&vcc5v0_usb>;
> + };
> +
> + vcc5v0_usb20_otg: vcc5v0_usb20_otg {
> + compatible = "regulator-fixed";
> + enable-active-high;
> + gpio = <&gpio4 RK_PB5 GPIO_ACTIVE_HIGH>;
> + regulator-name = "vcc5v0_usb20_otg";
> + regulator-min-microvolt = <5000000>;
> + regulator-max-microvolt = <5000000>;
> + vin-supply = <&dcdc_boost>;
> + };
> +
> + vcc3v3_sd: vcc3v3_sd {
> + compatible = "regulator-fixed";
> + enable-active-low;
> + gpio = <&gpio0 RK_PA5 GPIO_ACTIVE_LOW>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&vcc_sd_h>;
> + regulator-boot-on;
> + regulator-name = "vcc3v3_sd";
> + regulator-min-microvolt = <3300000>;
> + regulator-max-microvolt = <3300000>;
> + vin-supply = <&vcc_3v3>;
> + };
> +
> + /* sourced from vbus and vcc_bat+ via rk817 sw5 */
> + vcc_sys: vcc_sys {
> + compatible = "regulator-fixed";
> + regulator-name = "vcc_sys";
> + regulator-always-on;
> + regulator-boot-on;
> + regulator-min-microvolt = <4400000>;
> + regulator-max-microvolt = <4400000>;
> + vin-supply = <&vbus>;
> + };
> +
> + /* sourced from vcc_sys, sdio module operates internally at 3.3v */
> + vcc_wl: vcc_wl {
> + compatible = "regulator-fixed";
> + regulator-name = "vcc_wl";
> + regulator-always-on;
> + regulator-boot-on;
> + regulator-min-microvolt = <3300000>;
> + regulator-max-microvolt = <3300000>;
> + vin-supply = <&vcc_sys>;
> + };
> +};
> +
> +&combphy1 {
> + status = "okay";
> +};
> +
> +&combphy2 {
> + status = "okay";
> +};
> +
> +&cpu0 {
> + cpu-supply = <&vdd_cpu>;
> +};
> +
> +&cpu1 {
> + cpu-supply = <&vdd_cpu>;
> +};
> +
> +&cpu2 {
> + cpu-supply = <&vdd_cpu>;
> +};
> +
> +&cpu3 {
> + cpu-supply = <&vdd_cpu>;
> +};
> +
> +&cpu_thermal {
> + trips {
> + cpu_hot: cpu_hot {
No underscores in node names. Are you sure bindings/schema do not expect
some specific name?
> + temperature = <55000>;
> + hysteresis = <2000>;
> + type = "active";
> + };
> + };
Best regards,
Krzysztof
