On Tue, Oct 14, 2014 at 2:13 PM, Krzysztof Kozłowski <k.kozlowski@xxxxxxxxxxx> wrote: > On 14.10.2014 10:14, Thomas Abraham wrote: >> Add dt-binding documentation for s2mps15 PMIC device. The s2mps15 device >> is similar to s2mps11/14 PMIC device and has 27 LDO and 10 buck regulators. >> >> Cc: devicetree@xxxxxxxxxxxxxxx >> Signed-off-by: Thomas Abraham <thomas.ab@xxxxxxxxxxx> >> --- >> Documentation/devicetree/bindings/mfd/s2mps11.txt | 11 ++++++++--- >> 1 files changed, 8 insertions(+), 3 deletions(-) > > Looks good. > Reviewed-by: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx> > > P.S. Wrong devicetree-discuss@xxxxxxxxxxxxxxxx list? I receive bounces. Yes, that was wrong. Thanks for correcting it. Regards, Thomas. > > Best regards, > Krzysztof > > >> >> diff --git a/Documentation/devicetree/bindings/mfd/s2mps11.txt b/Documentation/devicetree/bindings/mfd/s2mps11.txt >> index 0e4026a..41ee3f5 100644 >> --- a/Documentation/devicetree/bindings/mfd/s2mps11.txt >> +++ b/Documentation/devicetree/bindings/mfd/s2mps11.txt >> @@ -1,5 +1,5 @@ >> >> -* Samsung S2MPS11, S2MPS14 and S2MPU02 Voltage and Current Regulator >> +* Samsung S2MPS11/14/15 and S2MPU02 Voltage and Current Regulator >> >> The Samsung S2MPS11 is a multi-function device which includes voltage and >> current regulators, RTC, charger controller and other sub-blocks. It is >> @@ -7,8 +7,11 @@ interfaced to the host controller using an I2C interface. Each sub-block is >> addressed by the host system using different I2C slave addresses. >> >> Required properties: >> -- compatible: Should be "samsung,s2mps11-pmic" or "samsung,s2mps14-pmic" >> - or "samsung,s2mpu02-pmic". >> +- compatible: Should be one of the following >> + - "samsung,s2mps11-pmic" >> + - "samsung,s2mps14-pmic" >> + - "samsung,s2mps15-pmic" >> + - "samsung,s2mpu02-pmic" >> - reg: Specifies the I2C slave address of the pmic block. It should be 0x66. >> >> Optional properties: >> @@ -82,12 +85,14 @@ as per the datasheet of s2mps11. >> - valid values for n are: >> - S2MPS11: 1 to 38 >> - S2MPS14: 1 to 25 >> + - S2MPS15: 1 to 27 >> - S2MPU02: 1 to 28 >> - Example: LDO1, LDO2, LDO28 >> - BUCKn >> - valid values for n are: >> - S2MPS11: 1 to 10 >> - S2MPS14: 1 to 5 >> + - S2MPS15: 1 to 10 >> - S2MPU02: 1 to 7 >> - Example: BUCK1, BUCK2, BUCK9 >> >> > > -- > To unsubscribe from this list: send the line "unsubscribe linux-kernel" in > the body of a message to majordomo@xxxxxxxxxxxxxxx > More majordomo info at http://vger.kernel.org/majordomo-info.html > Please read the FAQ at http://www.tux.org/lkml/ -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
