Remove the gpio-keys entries from the Ampere's Mt. Jade BMC device
tree. The user space applications are going to change from using
libevdev to libgpiod.
Signed-off-by: Quan Nguyen <quan@xxxxxxxxxxxxxxxxxxxxxx>
---
.../arm/boot/dts/aspeed-bmc-ampere-mtjade.dts | 95 -------------------
1 file changed, 95 deletions(-)
diff --git a/arch/arm/boot/dts/aspeed-bmc-ampere-mtjade.dts b/arch/arm/boot/dts/aspeed-bmc-ampere-mtjade.dts
index 82a6f14a45f0..d127cbcc7998 100644
--- a/arch/arm/boot/dts/aspeed-bmc-ampere-mtjade.dts
+++ b/arch/arm/boot/dts/aspeed-bmc-ampere-mtjade.dts
@@ -97,101 +97,6 @@ identify {
};
};
- gpio-keys {
- compatible = "gpio-keys";
-
- event-shutdown-ack {
- label = "SHUTDOWN_ACK";
- gpios = <&gpio ASPEED_GPIO(G, 2) GPIO_ACTIVE_LOW>;
- linux,code = <ASPEED_GPIO(G, 2)>;
- };
-
- event-reboot-ack {
- label = "REBOOT_ACK";
- gpios = <&gpio ASPEED_GPIO(J, 3) GPIO_ACTIVE_LOW>;
- linux,code = <ASPEED_GPIO(J, 3)>;
- };
-
- event-s0-overtemp {
- label = "S0_OVERTEMP";
- gpios = <&gpio ASPEED_GPIO(G, 3) GPIO_ACTIVE_LOW>;
- linux,code = <ASPEED_GPIO(G, 3)>;
- };
-
- event-s0-hightemp {
- label = "S0_HIGHTEMP";
- gpios = <&gpio ASPEED_GPIO(J, 0) GPIO_ACTIVE_LOW>;
- linux,code = <ASPEED_GPIO(J, 0)>;
- };
-
- event-s0-cpu-fault {
- label = "S0_CPU_FAULT";
- gpios = <&gpio ASPEED_GPIO(J, 1) GPIO_ACTIVE_HIGH>;
- linux,code = <ASPEED_GPIO(J, 1)>;
- };
-
- event-s0-scp-auth-fail {
- label = "S0_SCP_AUTH_FAIL";
- gpios = <&gpio ASPEED_GPIO(J, 2) GPIO_ACTIVE_LOW>;
- linux,code = <ASPEED_GPIO(J, 2)>;
- };
-
- event-s1-scp-auth-fail {
- label = "S1_SCP_AUTH_FAIL";
- gpios = <&gpio ASPEED_GPIO(Z, 5) GPIO_ACTIVE_LOW>;
- linux,code = <ASPEED_GPIO(Z, 5)>;
- };
-
- event-s1-overtemp {
- label = "S1_OVERTEMP";
- gpios = <&gpio ASPEED_GPIO(Z, 6) GPIO_ACTIVE_LOW>;
- linux,code = <ASPEED_GPIO(Z, 6)>;
- };
-
- event-s1-hightemp {
- label = "S1_HIGHTEMP";
- gpios = <&gpio ASPEED_GPIO(AB, 0) GPIO_ACTIVE_LOW>;
- linux,code = <ASPEED_GPIO(AB, 0)>;
- };
-
- event-s1-cpu-fault {
- label = "S1_CPU_FAULT";
- gpios = <&gpio ASPEED_GPIO(Z, 1) GPIO_ACTIVE_HIGH>;
- linux,code = <ASPEED_GPIO(Z, 1)>;
- };
-
- event-id {
- label = "ID_BUTTON";
- gpios = <&gpio ASPEED_GPIO(Q, 5) GPIO_ACTIVE_LOW>;
- linux,code = <ASPEED_GPIO(Q, 5)>;
- };
-
- event-psu1-vin-good {
- label = "PSU1_VIN_GOOD";
- gpios = <&gpio ASPEED_GPIO(H, 4) GPIO_ACTIVE_LOW>;
- linux,code = <ASPEED_GPIO(H, 4)>;
- };
-
- event-psu2-vin-good {
- label = "PSU2_VIN_GOOD";
- gpios = <&gpio ASPEED_GPIO(H, 5) GPIO_ACTIVE_LOW>;
- linux,code = <ASPEED_GPIO(H, 5)>;
- };
-
- event-psu1-present {
- label = "PSU1_PRESENT";
- gpios = <&gpio ASPEED_GPIO(I, 0) GPIO_ACTIVE_LOW>;
- linux,code = <ASPEED_GPIO(I, 0)>;
- };
-
- event-psu2-present {
- label = "PSU2_PRESENT";
- gpios = <&gpio ASPEED_GPIO(I, 1) GPIO_ACTIVE_LOW>;
- linux,code = <ASPEED_GPIO(I, 1)>;
- };
-
- };
-
gpioA0mux: mux-controller {
compatible = "gpio-mux";
#mux-control-cells = <0>;
--
2.35.1
