Hi,
The subject has not been parsed correctly, I resent a proper patch here:
https://patchwork.kernel.org/project/linux-mediatek/patch/20220914131339.18348-1-aouledameur@xxxxxxxxxxxx/
Sorry for the noise.
Regards,
Amjad
On 9/14/22 15:12, Amjad Ouled-Ameur wrote:
Subject: [PATCH] arm64: dts: mediatek: mt8183: remove thermal zones without
trips.
Thermal zones without trip point are not registered by thermal core.
tzts1 ~ tzts6 zones of mt8183 were intially introduced for test-purpose
only but are not supposed to remain on DT.
Remove the zones above and keep only cpu_thermal.
Signed-off-by: Amjad Ouled-Ameur <aouledameur@xxxxxxxxxxxx>
---
arch/arm64/boot/dts/mediatek/mt8183.dtsi | 57 ------------------------
1 file changed, 57 deletions(-)
diff --git a/arch/arm64/boot/dts/mediatek/mt8183.dtsi b/arch/arm64/boot/dts/mediatek/mt8183.dtsi
index 9d32871973a2..f65fae8939de 100644
--- a/arch/arm64/boot/dts/mediatek/mt8183.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt8183.dtsi
@@ -1182,63 +1182,6 @@ THERMAL_NO_LIMIT
};
};
};
-
- /* The tzts1 ~ tzts6 don't need to polling */
- /* The tzts1 ~ tzts6 don't need to thermal throttle */
-
- tzts1: tzts1 {
- polling-delay-passive = <0>;
- polling-delay = <0>;
- thermal-sensors = <&thermal 1>;
- sustainable-power = <5000>;
- trips {};
- cooling-maps {};
- };
-
- tzts2: tzts2 {
- polling-delay-passive = <0>;
- polling-delay = <0>;
- thermal-sensors = <&thermal 2>;
- sustainable-power = <5000>;
- trips {};
- cooling-maps {};
- };
-
- tzts3: tzts3 {
- polling-delay-passive = <0>;
- polling-delay = <0>;
- thermal-sensors = <&thermal 3>;
- sustainable-power = <5000>;
- trips {};
- cooling-maps {};
- };
-
- tzts4: tzts4 {
- polling-delay-passive = <0>;
- polling-delay = <0>;
- thermal-sensors = <&thermal 4>;
- sustainable-power = <5000>;
- trips {};
- cooling-maps {};
- };
-
- tzts5: tzts5 {
- polling-delay-passive = <0>;
- polling-delay = <0>;
- thermal-sensors = <&thermal 5>;
- sustainable-power = <5000>;
- trips {};
- cooling-maps {};
- };
-
- tztsABB: tztsABB {
- polling-delay-passive = <0>;
- polling-delay = <0>;
- thermal-sensors = <&thermal 6>;
- sustainable-power = <5000>;
- trips {};
- cooling-maps {};
- };
};
pwm0: pwm@1100e000 {
