Re: [PATCH 1/2] dt-bindings: pinctrl: qcom: add sdm670 pinctrl

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Tue, Sep 13, 2022 at 09:44:03PM -0400, Richard Acayan wrote:
> There is a new driver for the Snapdragon 670 TLMM (Top-Level Mode
> Multiplexer). Document it.
> 
> Adapted from qcom,sm6350-pinctrl.yaml in the same directory at
> commit c09acbc499e8 ("dt-bindings: pinctrl: use pinctrl.yaml").
> 
> Signed-off-by: Richard Acayan <mailingradian@xxxxxxxxx>
> ---
>  .../bindings/pinctrl/qcom,sdm670-pinctrl.yaml | 128 ++++++++++++++++++
>  1 file changed, 128 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/pinctrl/qcom,sdm670-pinctrl.yaml
> 
> diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,sdm670-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,sdm670-pinctrl.yaml
> new file mode 100644
> index 000000000000..28a690bfd348
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/pinctrl/qcom,sdm670-pinctrl.yaml
> @@ -0,0 +1,128 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/pinctrl/qcom,sdm670-pinctrl.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Qualcomm Technologies, Inc. SDM670 TLMM block
> +
> +maintainers:
> +  - Richard Acayan <mailingradian@xxxxxxxxx>
> +
> +description: |
> +  This binding describes the Top Level Mode Multiplexer (TLMM) block found
> +  in the SDM670 platform.
> +
> +allOf:
> +  - $ref: "pinctrl.yaml#"
> +  - $ref: /schemas/pinctrl/qcom,tlmm-common.yaml#
> +
> +properties:
> +  compatible:
> +    const: qcom,sdm670-pinctrl
> +
> +  reg:
> +    maxItems: 1
> +
> +  interrupts: true
> +  interrupt-controller: true
> +  '#interrupt-cells': true
> +  gpio-controller: true
> +  gpio-reserved-ranges: true
> +  '#gpio-cells': true
> +  gpio-ranges: true
> +  wakeup-parent: true
> +
> +required:
> +  - compatible
> +  - reg
> +
> +additionalProperties: false
> +
> +patternProperties:
> +  '-state$':
> +    oneOf:
> +      - $ref: "#/$defs/qcom-sdm670-tlmm-state"
> +      - patternProperties:
> +          ".*":

Please see
https://lore.kernel.org/linux-arm-msm/20220912061746.6311-2-krzysztof.kozlowski@xxxxxxxxxx/

> +            $ref: "#/$defs/qcom-sdm670-tlmm-state"
> +
> +$defs:
> +  qcom-sdm670-tlmm-state:
> +    type: object
> +    description:
> +      Pinctrl node's client devices use subnodes for desired pin configuration.
> +      Client device subnodes use below standard properties.
> +    $ref: "qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state"
> +
> +    properties:
> +      pins:
> +        description:
> +          List of gpio pins affected by the properties specified in this
> +          subnode.
> +        items:
> +          oneOf:
> +            - pattern: "^gpio([0-9]|[1-9][0-9]|1[0-4][0-9]|15[01])$"

You only have gpio0 through gpio149 in the implementation, so the last
15[01] is not applicable.

> +            - enum: [ sdc1_rclk, sdc1_clk, sdc1_cmd, sdc1_data, sdc2_clk,
> +                      sdc2_cmd, sdc2_data ]

You're missing ufs_reset in this list.

> +        minItems: 1
> +        maxItems: 36
> +
> +      function:

Please see
https://lore.kernel.org/linux-arm-msm/20220912061746.6311-6-krzysztof.kozlowski@xxxxxxxxxx/

Regards,
Bjorn

> +        description:
> +          Specify the alternative function to be configured for the specified
> +          pins.
> +
> +        enum: [ adsp_ext, agera_pll, atest_char, atest_tsens, atest_tsens2, atest_usb1, atest_usb10,
> +                atest_usb11, atest_usb12, atest_usb13, atest_usb2, atest_usb20, atest_usb21,
> +                atest_usb22, atest_usb23, cam_mclk, cci_async, cci_i2c, cci_timer0, cci_timer1,
> +                cci_timer2, cci_timer3, cci_timer4, copy_gp, copy_phase, dbg_out, ddr_bist,
> +                ddr_pxi0, ddr_pxi1, ddr_pxi2, ddr_pxi3, edp_hot, edp_lcd, gcc_gp1, gcc_gp2, gcc_gp3,
> +                gp_pdm0, gp_pdm1, gp_pdm2, gpio, gps_tx, jitter_bist, ldo_en, ldo_update,
> +                lpass_slimbus, m_voc, mdp_vsync, mdp_vsync0, mdp_vsync1, mdp_vsync2, mdp_vsync3,
> +                mss_lte, nav_pps, pa_indicator, pci_e0, pci_e1, phase_flag, pll_bist, pll_bypassnl,
> +                pll_reset, pri_mi2s, pri_mi2s_ws, prng_rosc, qdss_cti, qdss, qlink_enable,
> +                qlink_request, qua_mi2s, qup0, qup1, qup10, qup11, qup12, qup13, qup14, qup15, qup2,
> +                qup3, qup4, qup5, qup6, qup7, qup8, qup9, qup_l4, qup_l5, qup_l6, sdc4_clk,
> +                sdc4_cmd, sdc4_data, sd_write, sec_mi2s, ter_mi2s, tgu_ch0, tgu_ch1, tgu_ch2,
> +                tgu_ch3, tsif1_clk, tsif1_data, tsif1_en, tsif1_error, tsif1_sync, tsif2_clk,
> +                tsif2_data, tsif2_en, tsif2_error, tsif2_sync, uim1_clk, uim1_data, uim1_present,
> +                uim1_reset, uim2_clk, uim2_data, uim2_present, uim2_reset, uim_batt, usb_phy, vfr_1,
> +                vsense_trigger, wlan1_adc0, wlan1_adc1, wlan2_adc0, wlan2_adc1, wsa_clk, wsa_data, ]
> +
> +
> +      bias-disable: true
> +      bias-pull-down: true
> +      bias-pull-up: true
> +      drive-strength: true
> +      input-enable: true
> +      output-high: true
> +      output-low: true
> +
> +    required:
> +      - pins
> +      - function
> +
> +    additionalProperties: false
> +
> +examples:
> +  - |
> +        #include <dt-bindings/interrupt-controller/arm-gic.h>
> +        pinctrl@3400000 {
> +                compatible = "qcom,sdm670-pinctrl";
> +                reg = <0x03400000 0x300000>;
> +                interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
> +                gpio-controller;
> +                #gpio-cells = <2>;
> +                interrupt-controller;
> +                #interrupt-cells = <2>;
> +                gpio-ranges = <&tlmm 0 0 151>;
> +
> +                qup-i2c9-state {
> +                        pinmux {
> +                                pins = "gpio6", "gpio7";
> +                                function = "qup9";
> +                        };
> +                };
> +        };
> +...
> -- 
> 2.37.3
> 



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux