When sending data in tpm_stm_i2c_send, each loop iteration send buf. Send buf + i instead as the goal of this for loop is to send a number of byte from buf that fit in burstcnt. Once those byte are sent, we are supposed to send the next ones. The driver was working because the burstcount value returns always the maximum size for a TPM command or response. (0x800 for a command and 0x400 for a response). Reviewed-By: Jason Gunthorpe <jgunthorpe@xxxxxxxxxxxxxxxxxxxx> Signed-off-by: Christophe Ricard <christophe-h.ricard@xxxxxx> --- drivers/char/tpm/tpm_i2c_stm_st33.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/char/tpm/tpm_i2c_stm_st33.c b/drivers/char/tpm/tpm_i2c_stm_st33.c index ed4176e..76b958a 100644 --- a/drivers/char/tpm/tpm_i2c_stm_st33.c +++ b/drivers/char/tpm/tpm_i2c_stm_st33.c @@ -467,7 +467,7 @@ static int tpm_stm_i2c_send(struct tpm_chip *chip, unsigned char *buf, if (burstcnt < 0) return burstcnt; size = min_t(int, len - i - 1, burstcnt); - r = I2C_WRITE_DATA(tpm_dev, TPM_DATA_FIFO, buf, size); + r = I2C_WRITE_DATA(tpm_dev, TPM_DATA_FIFO, buf + i, size); if (r < 0) goto out_err; -- 1.9.1 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
