Add ahci controller, glue layer, and clock nodes for Pro4 SoC. The glue layer includes reset and phy, and the clock node is used for handling ahci clocks on SoC-glue. Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@xxxxxxxxxxxxx> --- arch/arm/boot/dts/uniphier-pro4-ace.dts | 8 ++ arch/arm/boot/dts/uniphier-pro4-ref.dts | 8 ++ arch/arm/boot/dts/uniphier-pro4.dtsi | 97 +++++++++++++++++++++++++ 3 files changed, 113 insertions(+) diff --git a/arch/arm/boot/dts/uniphier-pro4-ace.dts b/arch/arm/boot/dts/uniphier-pro4-ace.dts index 27ff2b7b9d0e..6baee4410d9c 100644 --- a/arch/arm/boot/dts/uniphier-pro4-ace.dts +++ b/arch/arm/boot/dts/uniphier-pro4-ace.dts @@ -99,3 +99,11 @@ &usb0 { &usb1 { status = "okay"; }; + +&ahci0 { + status = "okay"; +}; + +&ahci1 { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/uniphier-pro4-ref.dts b/arch/arm/boot/dts/uniphier-pro4-ref.dts index 48f7f23bab91..d2ce5c039865 100644 --- a/arch/arm/boot/dts/uniphier-pro4-ref.dts +++ b/arch/arm/boot/dts/uniphier-pro4-ref.dts @@ -108,3 +108,11 @@ nand@0 { reg = <0>; }; }; + +&ahci0 { + status = "okay"; +}; + +&ahci1 { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/uniphier-pro4.dtsi b/arch/arm/boot/dts/uniphier-pro4.dtsi index 8cb4e7043e60..a309e64c57c8 100644 --- a/arch/arm/boot/dts/uniphier-pro4.dtsi +++ b/arch/arm/boot/dts/uniphier-pro4.dtsi @@ -411,6 +411,11 @@ usb_phy3: phy@3 { vbus-supply = <&usb1_vbus>; }; }; + + sg_clk: clock { + compatible = "socionext,uniphier-pro4-sg-clock"; + #clock-cells = <1>; + }; }; soc-glue@5f900000 { @@ -513,6 +518,98 @@ mdio: mdio { }; }; + ahci0: sata@65600000 { + compatible = "socionext,uniphier-pro4-ahci", + "generic-ahci"; + status = "disabled"; + reg = <0x65600000 0x10000>; + interrupts = <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&sys_clk 12>, <&sys_clk 28>; + resets = <&sys_rst 12>, <&sys_rst 28>, <&ahci0_rst 3>; + ports-implemented = <1>; + phys = <&ahci0_phy>; + assigned-clocks = <&sg_clk 0>; + assigned-clock-rates = <25000000>; + }; + + sata-controller@65700000 { + compatible = "socionext,uniphier-pxs2-ahci-glue", + "simple-mfd"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x65700000 0x100>; + + ahci0_rst: reset-controller@0 { + compatible = "socionext,uniphier-pro4-ahci-reset"; + reg = <0x0 0x4>; + clock-names = "gio", "link"; + clocks = <&sys_clk 12>, <&sys_clk 28>; + reset-names = "gio", "link"; + resets = <&sys_rst 12>, <&sys_rst 28>; + #reset-cells = <1>; + }; + + ahci0_phy: sata-phy@10 { + compatible = "socionext,uniphier-pro4-ahci-phy"; + reg = <0x10 0x40>; + clock-names = "link", "gio"; + clocks = <&sys_clk 28>, <&sys_clk 12>; + reset-names = "link", "gio", "phy", + "pm", "tx", "rx"; + resets = <&sys_rst 28>, <&sys_rst 12>, + <&sys_rst 30>, + <&ahci0_rst 0>, <&ahci0_rst 1>, + <&ahci0_rst 2>; + #phy-cells = <0>; + }; + }; + + ahci1: sata@65800000 { + compatible = "socionext,uniphier-pro4-ahci", + "generic-ahci"; + status = "disabled"; + reg = <0x65800000 0x10000>; + interrupts = <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&sys_clk 12>, <&sys_clk 29>; + resets = <&sys_rst 12>, <&sys_rst 29>, <&ahci1_rst 3>; + ports-implemented = <1>; + phys = <&ahci1_phy>; + assigned-clocks = <&sg_clk 0>; + assigned-clock-rates = <25000000>; + }; + + sata-controller@65900000 { + compatible = "socionext,uniphier-pro4-ahci-glue", + "simple-mfd"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x65900000 0x100>; + + ahci1_rst: reset-controller@0 { + compatible = "socionext,uniphier-pro4-ahci-reset"; + reg = <0x0 0x4>; + clock-names = "gio", "link"; + clocks = <&sys_clk 12>, <&sys_clk 29>; + reset-names = "gio", "link"; + resets = <&sys_rst 12>, <&sys_rst 29>; + #reset-cells = <1>; + }; + + ahci1_phy: sata-phy@10 { + compatible = "socionext,uniphier-pro4-ahci-phy"; + reg = <0x10 0x40>; + clock-names = "link", "gio"; + clocks = <&sys_clk 29>, <&sys_clk 12>; + reset-names = "link", "gio", "phy", + "pm", "tx", "rx"; + resets = <&sys_rst 29>, <&sys_rst 12>, + <&sys_rst 30>, + <&ahci1_rst 0>, <&ahci1_rst 1>, + <&ahci1_rst 2>; + #phy-cells = <0>; + }; + }; + usb0: usb@65a00000 { compatible = "socionext,uniphier-dwc3", "snps,dwc3"; status = "disabled"; -- 2.25.1