This is not used by the DSA dt-binding, so remove it from all examples.
Signed-off-by: Vladimir Oltean <vladimir.oltean@xxxxxxx>
---
Documentation/devicetree/bindings/net/dsa/ar9331.txt | 1 -
.../devicetree/bindings/net/dsa/arrow,xrs700x.yaml | 1 -
Documentation/devicetree/bindings/net/dsa/brcm,b53.yaml | 2 --
.../devicetree/bindings/net/dsa/hirschmann,hellcreek.yaml | 1 -
Documentation/devicetree/bindings/net/dsa/lan9303.txt | 2 --
Documentation/devicetree/bindings/net/dsa/lantiq-gswip.txt | 1 -
.../devicetree/bindings/net/dsa/mediatek,mt7530.yaml | 7 -------
.../devicetree/bindings/net/dsa/microchip,ksz.yaml | 2 --
Documentation/devicetree/bindings/net/dsa/qca8k.yaml | 3 ---
Documentation/devicetree/bindings/net/dsa/realtek.yaml | 2 --
.../devicetree/bindings/net/dsa/renesas,rzn1-a5psw.yaml | 1 -
.../devicetree/bindings/net/dsa/vitesse,vsc73xx.txt | 2 --
12 files changed, 25 deletions(-)
diff --git a/Documentation/devicetree/bindings/net/dsa/ar9331.txt b/Documentation/devicetree/bindings/net/dsa/ar9331.txt
index 320607cbbb17..f824fdae0da2 100644
--- a/Documentation/devicetree/bindings/net/dsa/ar9331.txt
+++ b/Documentation/devicetree/bindings/net/dsa/ar9331.txt
@@ -76,7 +76,6 @@ eth1: ethernet@1a000000 {
switch_port0: port@0 {
reg = <0x0>;
- label = "cpu";
ethernet = <ð1>;
phy-mode = "gmii";
diff --git a/Documentation/devicetree/bindings/net/dsa/arrow,xrs700x.yaml b/Documentation/devicetree/bindings/net/dsa/arrow,xrs700x.yaml
index eb01a8f37ce4..259a0c6547f3 100644
--- a/Documentation/devicetree/bindings/net/dsa/arrow,xrs700x.yaml
+++ b/Documentation/devicetree/bindings/net/dsa/arrow,xrs700x.yaml
@@ -61,7 +61,6 @@ examples:
};
ethernet-port@3 {
reg = <3>;
- label = "cpu";
ethernet = <&fec1>;
phy-mode = "rgmii-id";
diff --git a/Documentation/devicetree/bindings/net/dsa/brcm,b53.yaml b/Documentation/devicetree/bindings/net/dsa/brcm,b53.yaml
index 2e01371b8288..1219b830b1a4 100644
--- a/Documentation/devicetree/bindings/net/dsa/brcm,b53.yaml
+++ b/Documentation/devicetree/bindings/net/dsa/brcm,b53.yaml
@@ -169,7 +169,6 @@ examples:
port@8 {
reg = <8>;
- label = "cpu";
phy-mode = "rgmii-txid";
ethernet = <ð0>;
fixed-link {
@@ -252,7 +251,6 @@ examples:
port@8 {
ethernet = <&amac2>;
- label = "cpu";
reg = <8>;
phy-mode = "internal";
diff --git a/Documentation/devicetree/bindings/net/dsa/hirschmann,hellcreek.yaml b/Documentation/devicetree/bindings/net/dsa/hirschmann,hellcreek.yaml
index 1ff44dd68a61..73b774eadd0b 100644
--- a/Documentation/devicetree/bindings/net/dsa/hirschmann,hellcreek.yaml
+++ b/Documentation/devicetree/bindings/net/dsa/hirschmann,hellcreek.yaml
@@ -91,7 +91,6 @@ examples:
port@0 {
reg = <0>;
- label = "cpu";
ethernet = <&gmac0>;
phy-mode = "mii";
diff --git a/Documentation/devicetree/bindings/net/dsa/lan9303.txt b/Documentation/devicetree/bindings/net/dsa/lan9303.txt
index 464d6bf87605..46a732087f5c 100644
--- a/Documentation/devicetree/bindings/net/dsa/lan9303.txt
+++ b/Documentation/devicetree/bindings/net/dsa/lan9303.txt
@@ -46,7 +46,6 @@ I2C managed mode:
port@0 { /* RMII fixed link to master */
reg = <0>;
- label = "cpu";
ethernet = <&master>;
};
@@ -83,7 +82,6 @@ MDIO managed mode:
port@0 {
reg = <0>;
- label = "cpu";
ethernet = <&master>;
};
diff --git a/Documentation/devicetree/bindings/net/dsa/lantiq-gswip.txt b/Documentation/devicetree/bindings/net/dsa/lantiq-gswip.txt
index e3829d3e480e..8bb1eff21cb1 100644
--- a/Documentation/devicetree/bindings/net/dsa/lantiq-gswip.txt
+++ b/Documentation/devicetree/bindings/net/dsa/lantiq-gswip.txt
@@ -96,7 +96,6 @@ switch@e108000 {
port@6 {
reg = <0x6>;
- label = "cpu";
ethernet = <ð0>;
};
};
diff --git a/Documentation/devicetree/bindings/net/dsa/mediatek,mt7530.yaml b/Documentation/devicetree/bindings/net/dsa/mediatek,mt7530.yaml
index 84bb36cab518..bc6446e1f55a 100644
--- a/Documentation/devicetree/bindings/net/dsa/mediatek,mt7530.yaml
+++ b/Documentation/devicetree/bindings/net/dsa/mediatek,mt7530.yaml
@@ -325,7 +325,6 @@ examples:
port@6 {
reg = <6>;
- label = "cpu";
ethernet = <&gmac0>;
phy-mode = "rgmii";
@@ -389,7 +388,6 @@ examples:
port@6 {
reg = <6>;
- label = "cpu";
ethernet = <&gmac0>;
phy-mode = "trgmii";
@@ -454,7 +452,6 @@ examples:
port@6 {
reg = <6>;
- label = "cpu";
ethernet = <&gmac0>;
phy-mode = "2500base-x";
@@ -521,7 +518,6 @@ examples:
port@6 {
reg = <6>;
- label = "cpu";
ethernet = <&gmac0>;
phy-mode = "trgmii";
@@ -610,7 +606,6 @@ examples:
port@6 {
reg = <6>;
- label = "cpu";
ethernet = <&gmac0>;
phy-mode = "trgmii";
@@ -699,7 +694,6 @@ examples:
port@6 {
reg = <6>;
- label = "cpu";
ethernet = <&gmac0>;
phy-mode = "trgmii";
@@ -787,7 +781,6 @@ examples:
port@6 {
reg = <6>;
- label = "cpu";
ethernet = <&gmac0>;
phy-mode = "trgmii";
diff --git a/Documentation/devicetree/bindings/net/dsa/microchip,ksz.yaml b/Documentation/devicetree/bindings/net/dsa/microchip,ksz.yaml
index 456802affc9d..4da75b1f9533 100644
--- a/Documentation/devicetree/bindings/net/dsa/microchip,ksz.yaml
+++ b/Documentation/devicetree/bindings/net/dsa/microchip,ksz.yaml
@@ -107,7 +107,6 @@ examples:
};
port@5 {
reg = <5>;
- label = "cpu";
ethernet = <ð0>;
phy-mode = "rgmii";
@@ -146,7 +145,6 @@ examples:
};
port@6 {
reg = <6>;
- label = "cpu";
ethernet = <ð0>;
phy-mode = "rgmii";
diff --git a/Documentation/devicetree/bindings/net/dsa/qca8k.yaml b/Documentation/devicetree/bindings/net/dsa/qca8k.yaml
index f3c88371d76c..978162df51f7 100644
--- a/Documentation/devicetree/bindings/net/dsa/qca8k.yaml
+++ b/Documentation/devicetree/bindings/net/dsa/qca8k.yaml
@@ -159,7 +159,6 @@ examples:
port@0 {
reg = <0>;
- label = "cpu";
ethernet = <&gmac1>;
phy-mode = "rgmii";
@@ -221,7 +220,6 @@ examples:
port@0 {
reg = <0>;
- label = "cpu";
ethernet = <&gmac1>;
phy-mode = "rgmii";
@@ -268,7 +266,6 @@ examples:
port@6 {
reg = <0>;
- label = "cpu";
ethernet = <&gmac1>;
phy-mode = "sgmii";
diff --git a/Documentation/devicetree/bindings/net/dsa/realtek.yaml b/Documentation/devicetree/bindings/net/dsa/realtek.yaml
index 4f99aff029dc..1a7d45a8ad66 100644
--- a/Documentation/devicetree/bindings/net/dsa/realtek.yaml
+++ b/Documentation/devicetree/bindings/net/dsa/realtek.yaml
@@ -189,7 +189,6 @@ examples:
};
port@5 {
reg = <5>;
- label = "cpu";
ethernet = <&gmac0>;
phy-mode = "rgmii";
fixed-link {
@@ -277,7 +276,6 @@ examples:
};
port@6 {
reg = <6>;
- label = "cpu";
ethernet = <&fec1>;
phy-mode = "rgmii";
tx-internal-delay-ps = <2000>;
diff --git a/Documentation/devicetree/bindings/net/dsa/renesas,rzn1-a5psw.yaml b/Documentation/devicetree/bindings/net/dsa/renesas,rzn1-a5psw.yaml
index 14a1f0b4c32b..7ca9c19a157c 100644
--- a/Documentation/devicetree/bindings/net/dsa/renesas,rzn1-a5psw.yaml
+++ b/Documentation/devicetree/bindings/net/dsa/renesas,rzn1-a5psw.yaml
@@ -130,7 +130,6 @@ examples:
port@4 {
reg = <4>;
ethernet = <&gmac2>;
- label = "cpu";
phy-mode = "internal";
fixed-link {
diff --git a/Documentation/devicetree/bindings/net/dsa/vitesse,vsc73xx.txt b/Documentation/devicetree/bindings/net/dsa/vitesse,vsc73xx.txt
index bbf4a13f6d75..258bef483673 100644
--- a/Documentation/devicetree/bindings/net/dsa/vitesse,vsc73xx.txt
+++ b/Documentation/devicetree/bindings/net/dsa/vitesse,vsc73xx.txt
@@ -75,7 +75,6 @@ switch@0 {
};
vsc: port@6 {
reg = <6>;
- label = "cpu";
ethernet = <&gmac1>;
phy-mode = "rgmii";
fixed-link {
@@ -117,7 +116,6 @@ switch@2,0 {
};
vsc: port@6 {
reg = <6>;
- label = "cpu";
ethernet = <&enet0>;
phy-mode = "rgmii";
fixed-link {
--
2.34.1
