On Fri, Sep 02, 2022 at 04:05:00PM -0700, Tim Harvey wrote:
> The GW7904 is based on the i.MX 8M Mini SoC featuring:
> - LPDDR4 DRAM
> - eMMC FLASH
> - microSD connector with UHS support
> - LIS2DE12 3-axis accelerometer
> - Gateworks System Controller
> - IMX8M FEC
> - 2x RS232 off-board connectors
> - PMIC
> - 10x bi-color LED's
> - 1x miniPCIe socket with PCIe and USB2.0
> - 802.3at Class 4 PoE
> - 10-30VDC input via barrel-jack
>
> Signed-off-by: Tim Harvey <tharvey@xxxxxxxxxxxxx>
> Cc: Rob Herring <robh+dt@xxxxxxxxxx>
> Cc: Krzysztof Kozlowski <krzk+dt@xxxxxxxxxx>
> Cc: Shawn Guo <shawnguo@xxxxxxxxxx>
> Cc: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
> Cc: Pengutronix Kernel Team <kernel@xxxxxxxxxxxxxx>
> Cc: Fabio Estevam <festevam@xxxxxxxxx>
> Cc: NXP Linux Team <linux-imx@xxxxxxx>
Could you move these Cc after --- below?
> ---
> arch/arm64/boot/dts/freescale/Makefile | 1 +
> .../dts/freescale/imx8mm-venice-gw7904.dts | 888 ++++++++++++++++++
> 2 files changed, 889 insertions(+)
> create mode 100644 arch/arm64/boot/dts/freescale/imx8mm-venice-gw7904.dts
>
> diff --git a/arch/arm64/boot/dts/freescale/Makefile b/arch/arm64/boot/dts/freescale/Makefile
> index 8bf7f7ecebaa..d7ae965d2b36 100644
> --- a/arch/arm64/boot/dts/freescale/Makefile
> +++ b/arch/arm64/boot/dts/freescale/Makefile
> @@ -67,6 +67,7 @@ dtb-$(CONFIG_ARCH_MXC) += imx8mm-venice-gw73xx-0x.dtb
> dtb-$(CONFIG_ARCH_MXC) += imx8mm-venice-gw7901.dtb
> dtb-$(CONFIG_ARCH_MXC) += imx8mm-venice-gw7902.dtb
> dtb-$(CONFIG_ARCH_MXC) += imx8mm-venice-gw7903.dtb
> +dtb-$(CONFIG_ARCH_MXC) += imx8mm-venice-gw7904.dtb
> dtb-$(CONFIG_ARCH_MXC) += imx8mm-verdin-nonwifi-dahlia.dtb
> dtb-$(CONFIG_ARCH_MXC) += imx8mm-verdin-nonwifi-dev.dtb
> dtb-$(CONFIG_ARCH_MXC) += imx8mm-verdin-wifi-dahlia.dtb
> diff --git a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7904.dts b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7904.dts
> new file mode 100644
> index 000000000000..02ba85a0842a
> --- /dev/null
> +++ b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7904.dts
> @@ -0,0 +1,888 @@
> +// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
> +/*
> + * Copyright 2022 Gateworks Corporation
> + */
> +
> +/dts-v1/;
> +
> +#include <dt-bindings/gpio/gpio.h>
> +#include <dt-bindings/input/linux-event-codes.h>
> +#include <dt-bindings/leds/common.h>
> +#include <dt-bindings/phy/phy-imx8-pcie.h>
> +
> +#include "imx8mm.dtsi"
> +
> +/ {
> + model = "Gateworks Venice GW7904 i.MX8MM board";
> + compatible = "gateworks,imx8mm-gw7904", "fsl,imx8mm";
> +
> + chosen {
> + stdout-path = &uart2;
> + };
> +
> + memory@40000000 {
> + device_type = "memory";
> + reg = <0x0 0x40000000 0 0x80000000>;
> + };
> +
> + gpio-keys {
> + compatible = "gpio-keys";
> +
> + key-0 {
> + label = "user_pb";
> + gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
> + linux,code = <BTN_0>;
> + };
> +
> + key-1 {
> + label = "user_pb1x";
> + linux,code = <BTN_1>;
> + interrupt-parent = <&gsc>;
> + interrupts = <0>;
> + };
> +
> + key-2 {
> + label = "key_erased";
> + linux,code = <BTN_2>;
> + interrupt-parent = <&gsc>;
> + interrupts = <1>;
> + };
> +
> + key-3 {
> + label = "eeprom_wp";
> + linux,code = <BTN_3>;
> + interrupt-parent = <&gsc>;
> + interrupts = <2>;
> + };
> +
> + key-4 {
> + label = "switch_hold";
> + linux,code = <BTN_5>;
> + interrupt-parent = <&gsc>;
> + interrupts = <7>;
> + };
> + };
> +
> + led-controller {
> + compatible = "gpio-leds";
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_gpio_leds>;
> +
> + led-0 {
> + function = LED_FUNCTION_STATUS;
> + color = <LED_COLOR_ID_GREEN>;
> + label = "led01_grn";
> + gpios = <&gpioled 0 GPIO_ACTIVE_LOW>;
> + default-state = "off";
> + };
> +
> + led-1 {
> + function = LED_FUNCTION_STATUS;
> + color = <LED_COLOR_ID_YELLOW>;
> + label = "led01_yel";
> + gpios = <&gpioled 1 GPIO_ACTIVE_LOW>;
> + default-state = "off";
> + };
> +
> + led-2 {
> + function = LED_FUNCTION_STATUS;
> + color = <LED_COLOR_ID_GREEN>;
> + label = "led02_grn";
> + gpios = <&gpioled 2 GPIO_ACTIVE_LOW>;
> + default-state = "off";
> + };
> +
> + led-3 {
> + function = LED_FUNCTION_STATUS;
> + color = <LED_COLOR_ID_YELLOW>;
> + label = "led02_yel";
> + gpios = <&gpioled 3 GPIO_ACTIVE_LOW>;
> + default-state = "off";
> + };
> +
> + led-4 {
> + function = LED_FUNCTION_STATUS;
> + color = <LED_COLOR_ID_GREEN>;
> + label = "led03_grn";
> + gpios = <&gpioled 4 GPIO_ACTIVE_LOW>;
> + default-state = "off";
> + };
> +
> + led-5 {
> + function = LED_FUNCTION_STATUS;
> + color = <LED_COLOR_ID_YELLOW>;
> + label = "led03_yel";
> + gpios = <&gpioled 5 GPIO_ACTIVE_LOW>;
> + default-state = "off";
> + };
> +
> + led-6 {
> + function = LED_FUNCTION_STATUS;
> + color = <LED_COLOR_ID_GREEN>;
> + label = "led04_grn";
> + gpios = <&gpioled 6 GPIO_ACTIVE_LOW>;
> + default-state = "off";
> + };
> +
> + led-7 {
> + function = LED_FUNCTION_STATUS;
> + color = <LED_COLOR_ID_YELLOW>;
> + label = "led04_yel";
> + gpios = <&gpioled 7 GPIO_ACTIVE_LOW>;
> + default-state = "off";
> + };
> +
> + led-8 {
> + function = LED_FUNCTION_STATUS;
> + color = <LED_COLOR_ID_GREEN>;
> + label = "led05_grn";
> + gpios = <&gpioled 8 GPIO_ACTIVE_LOW>;
> + default-state = "off";
> + };
> +
> + led-9 {
> + function = LED_FUNCTION_STATUS;
> + color = <LED_COLOR_ID_YELLOW>;
> + label = "led05_yel";
> + gpios = <&gpioled 9 GPIO_ACTIVE_LOW>;
> + default-state = "off";
> + };
> +
> + led-a {
The binding doesn't seem to define the number explicitly. I understand
we use hex in unit-address, but not sure a hex number is better than
decimal as part of node name, mostly meant to count the instance.
Shawn
> + function = LED_FUNCTION_STATUS;
> + color = <LED_COLOR_ID_GREEN>;
> + label = "led06_grn";
> + gpios = <&gpio1 8 GPIO_ACTIVE_LOW>;
> + default-state = "off";
> + };
> +
> + led-b {
> + function = LED_FUNCTION_STATUS;
> + color = <LED_COLOR_ID_RED>;
> + label = "led06_red";
> + gpios = <&gpio1 9 GPIO_ACTIVE_LOW>;
> + default-state = "off";
> + };
> +
> + led-c {
> + function = LED_FUNCTION_STATUS;
> + color = <LED_COLOR_ID_GREEN>;
> + label = "led07_grn";
> + gpios = <&gpio1 10 GPIO_ACTIVE_LOW>;
> + default-state = "off";
> + };
> +
> + led-d {
> + function = LED_FUNCTION_STATUS;
> + color = <LED_COLOR_ID_RED>;
> + label = "led07_red";
> + gpios = <&gpio1 11 GPIO_ACTIVE_LOW>;
> + default-state = "off";
> + };
> +
> + led-e {
> + function = LED_FUNCTION_STATUS;
> + color = <LED_COLOR_ID_GREEN>;
> + label = "led08_grn";
> + gpios = <&gpioled 10 GPIO_ACTIVE_LOW>;
> + default-state = "off";
> + };
> +
> + led-f {
> + function = LED_FUNCTION_STATUS;
> + color = <LED_COLOR_ID_YELLOW>;
> + label = "led08_yel";
> + gpios = <&gpioled 11 GPIO_ACTIVE_LOW>;
> + default-state = "off";
> + };
> +
> + led-10 {
> + function = LED_FUNCTION_STATUS;
> + color = <LED_COLOR_ID_GREEN>;
> + label = "led09_grn";
> + gpios = <&gpioled 12 GPIO_ACTIVE_LOW>;
> + default-state = "off";
> + };
> +
> + led-11 {
> + function = LED_FUNCTION_STATUS;
> + color = <LED_COLOR_ID_YELLOW>;
> + label = "led09_yel";
> + gpios = <&gpioled 13 GPIO_ACTIVE_LOW>;
> + default-state = "off";
> + };
> +
> + led-12 {
> + function = LED_FUNCTION_STATUS;
> + color = <LED_COLOR_ID_GREEN>;
> + label = "led10_grn";
> + gpios = <&gpioled 14 GPIO_ACTIVE_LOW>;
> + default-state = "off";
> + };
> +
> + led-13 {
> + function = LED_FUNCTION_STATUS;
> + color = <LED_COLOR_ID_YELLOW>;
> + label = "led10_yel";
> + gpios = <&gpioled 15 GPIO_ACTIVE_LOW>;
> + default-state = "off";
> + };
> + };
> +
> + pcie0_refclk: pcie0-refclk {
> + compatible = "fixed-clock";
> + #clock-cells = <0>;
> + clock-frequency = <100000000>;
> + };
> +
> + reg_3p3v: regulator-3p3v {
> + compatible = "regulator-fixed";
> + regulator-name = "3P3V";
> + regulator-min-microvolt = <3300000>;
> + regulator-max-microvolt = <3300000>;
> + regulator-always-on;
> + };
> +};
> +
> +&A53_0 {
> + cpu-supply = <&buck2>;
> +};
> +
> +&A53_1 {
> + cpu-supply = <&buck2>;
> +};
> +
> +&A53_2 {
> + cpu-supply = <&buck2>;
> +};
> +
> +&A53_3 {
> + cpu-supply = <&buck2>;
> +};
> +
> +&ddrc {
> + operating-points-v2 = <&ddrc_opp_table>;
> +
> + ddrc_opp_table: opp-table {
> + compatible = "operating-points-v2";
> +
> + opp-25M {
> + opp-hz = /bits/ 64 <25000000>;
> + };
> +
> + opp-100M {
> + opp-hz = /bits/ 64 <100000000>;
> + };
> +
> + opp-750M {
> + opp-hz = /bits/ 64 <750000000>;
> + };
> + };
> +};
> +
> +&fec1 {
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_fec1>;
> + phy-mode = "rgmii-id";
> + phy-handle = <ðphy0>;
> + local-mac-address = [00 00 00 00 00 00];
> + status = "okay";
> +
> + mdio {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + ethphy0: ethernet-phy@0 {
> + compatible = "ethernet-phy-ieee802.3-c22";
> + reg = <0>;
> + };
> + };
> +};
> +
> +&gpio1 {
> + gpio-line-names = "", "", "", "", "", "", "", "",
> + "", "", "", "", "rs232_en#", "", "", "",
> + "", "", "", "", "", "", "", "",
> + "", "", "", "", "", "", "", "";
> +};
> +
> +&gpio5 {
> + gpio-line-names = "", "", "", "", "", "", "", "",
> + "", "", "", "", "pci_wdis#", "", "", "",
> + "", "", "", "", "", "", "", "",
> + "", "", "", "", "", "", "", "";
> +};
> +
> +&i2c1 {
> + clock-frequency = <100000>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_i2c1>;
> + status = "okay";
> +
> + gsc: gsc@20 {
> + compatible = "gw,gsc";
> + reg = <0x20>;
> + pinctrl-0 = <&pinctrl_gsc>;
> + interrupt-parent = <&gpio4>;
> + interrupts = <26 IRQ_TYPE_EDGE_FALLING>;
> + interrupt-controller;
> + #interrupt-cells = <1>;
> +
> + adc {
> + compatible = "gw,gsc-adc";
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + channel@6 {
> + gw,mode = <0>;
> + reg = <0x06>;
> + label = "temp";
> + };
> +
> + channel@82 {
> + gw,mode = <2>;
> + reg = <0x82>;
> + label = "vin";
> + gw,voltage-divider-ohms = <22100 1000>;
> + gw,voltage-offset-microvolt = <700000>;
> + };
> +
> + channel@84 {
> + gw,mode = <2>;
> + reg = <0x84>;
> + label = "vdd_5p0";
> + gw,voltage-divider-ohms = <10000 10000>;
> + };
> +
> + channel@86 {
> + gw,mode = <2>;
> + reg = <0x86>;
> + label = "vdd_3p3";
> + gw,voltage-divider-ohms = <10000 10000>;
> + };
> +
> + channel@88 {
> + gw,mode = <2>;
> + reg = <0x88>;
> + label = "vdd_0p9";
> + };
> +
> + channel@8c {
> + gw,mode = <2>;
> + reg = <0x8c>;
> + label = "vdd_soc";
> + };
> +
> + channel@8e {
> + gw,mode = <2>;
> + reg = <0x8e>;
> + label = "vdd_arm";
> + };
> +
> + channel@90 {
> + gw,mode = <2>;
> + reg = <0x90>;
> + label = "vdd_1p8";
> + };
> +
> + channel@92 {
> + gw,mode = <2>;
> + reg = <0x92>;
> + label = "vdd_dram";
> + };
> +
> + channel@a2 {
> + gw,mode = <2>;
> + reg = <0xa2>;
> + label = "vdd_gsc";
> + gw,voltage-divider-ohms = <10000 10000>;
> + };
> + };
> + };
> +
> + gpio: gpio@23 {
> + compatible = "nxp,pca9555";
> + reg = <0x23>;
> + gpio-controller;
> + #gpio-cells = <2>;
> + interrupt-parent = <&gsc>;
> + interrupts = <4>;
> + };
> +
> + eeprom@50 {
> + compatible = "atmel,24c02";
> + reg = <0x50>;
> + pagesize = <16>;
> + };
> +
> + eeprom@51 {
> + compatible = "atmel,24c02";
> + reg = <0x51>;
> + pagesize = <16>;
> + };
> +
> + eeprom@52 {
> + compatible = "atmel,24c02";
> + reg = <0x52>;
> + pagesize = <16>;
> + };
> +
> + eeprom@53 {
> + compatible = "atmel,24c02";
> + reg = <0x53>;
> + pagesize = <16>;
> + };
> +
> + rtc@68 {
> + compatible = "dallas,ds1672";
> + reg = <0x68>;
> + };
> +};
> +
> +&i2c2 {
> + clock-frequency = <400000>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_i2c2>;
> + status = "okay";
> +
> + pmic@4b {
> + compatible = "rohm,bd71847";
> + reg = <0x4b>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_pmic>;
> + interrupt-parent = <&gpio3>;
> + interrupts = <8 IRQ_TYPE_LEVEL_LOW>;
> + rohm,reset-snvs-powered;
> + #clock-cells = <0>;
> + clocks = <&osc_32k 0>;
> + clock-output-names = "clk-32k-out";
> +
> + regulators {
> + /* vdd_soc: 0.805-0.900V (typ=0.8V) */
> + BUCK1 {
> + regulator-name = "buck1";
> + regulator-min-microvolt = <700000>;
> + regulator-max-microvolt = <1300000>;
> + regulator-boot-on;
> + regulator-always-on;
> + regulator-ramp-delay = <1250>;
> + };
> +
> + /* vdd_arm: 0.805-1.0V (typ=0.9V) */
> + buck2: BUCK2 {
> + regulator-name = "buck2";
> + regulator-min-microvolt = <700000>;
> + regulator-max-microvolt = <1300000>;
> + regulator-boot-on;
> + regulator-always-on;
> + regulator-ramp-delay = <1250>;
> + rohm,dvs-run-voltage = <1000000>;
> + rohm,dvs-idle-voltage = <900000>;
> + };
> +
> + /* vdd_0p9: 0.805-1.0V (typ=0.9V) */
> + BUCK3 {
> + regulator-name = "buck3";
> + regulator-min-microvolt = <700000>;
> + regulator-max-microvolt = <1350000>;
> + regulator-boot-on;
> + regulator-always-on;
> + };
> +
> + /* vdd_3p3 */
> + BUCK4 {
> + regulator-name = "buck4";
> + regulator-min-microvolt = <3000000>;
> + regulator-max-microvolt = <3300000>;
> + regulator-boot-on;
> + regulator-always-on;
> + };
> +
> + /* vdd_1p8 */
> + BUCK5 {
> + regulator-name = "buck5";
> + regulator-min-microvolt = <1605000>;
> + regulator-max-microvolt = <1995000>;
> + regulator-boot-on;
> + regulator-always-on;
> + };
> +
> + /* vdd_dram */
> + BUCK6 {
> + regulator-name = "buck6";
> + regulator-min-microvolt = <800000>;
> + regulator-max-microvolt = <1400000>;
> + regulator-boot-on;
> + regulator-always-on;
> + };
> +
> + /* nvcc_snvs_1p8 */
> + LDO1 {
> + regulator-name = "ldo1";
> + regulator-min-microvolt = <1600000>;
> + regulator-max-microvolt = <1900000>;
> + regulator-boot-on;
> + regulator-always-on;
> + };
> +
> + /* vdd_snvs_0p8 */
> + LDO2 {
> + regulator-name = "ldo2";
> + regulator-min-microvolt = <800000>;
> + regulator-max-microvolt = <900000>;
> + regulator-boot-on;
> + regulator-always-on;
> + };
> +
> + /* vdda_1p8 */
> + LDO3 {
> + regulator-name = "ldo3";
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <3300000>;
> + regulator-boot-on;
> + regulator-always-on;
> + };
> +
> + LDO4 {
> + regulator-name = "ldo4";
> + regulator-min-microvolt = <900000>;
> + regulator-max-microvolt = <1800000>;
> + regulator-boot-on;
> + regulator-always-on;
> + };
> +
> + LDO6 {
> + regulator-name = "ldo6";
> + regulator-min-microvolt = <900000>;
> + regulator-max-microvolt = <1800000>;
> + regulator-boot-on;
> + regulator-always-on;
> + };
> + };
> + };
> +};
> +
> +&i2c3 {
> + clock-frequency = <400000>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_i2c3>;
> + status = "okay";
> +
> + accelerometer@19 {
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_accel>;
> + compatible = "st,lis2de12";
> + reg = <0x19>;
> + st,drdy-int-pin = <1>;
> + interrupt-parent = <&gpio1>;
> + interrupts = <15 IRQ_TYPE_LEVEL_LOW>;
> + interrupt-names = "INT1";
> + };
> +};
> +
> +&i2c4 {
> + clock-frequency = <400000>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_i2c4>;
> + status = "okay";
> +
> + gpioled: gpio@27 {
> + compatible = "nxp,pca9555";
> + reg = <0x27>;
> + gpio-controller;
> + #gpio-cells = <2>;
> + };
> +};
> +
> +&pcie_phy {
> + fsl,refclk-pad-mode = <IMX8_PCIE_REFCLK_PAD_INPUT>;
> + fsl,clkreq-unsupported;
> + clocks = <&pcie0_refclk>;
> + clock-names = "ref";
> + status = "okay";
> +};
> +
> +&pcie0 {
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_pcie0>;
> + reset-gpio = <&gpio5 11 GPIO_ACTIVE_LOW>;
> + clocks = <&clk IMX8MM_CLK_PCIE1_ROOT>, <&clk IMX8MM_CLK_PCIE1_AUX>,
> + <&pcie0_refclk>;
> + clock-names = "pcie", "pcie_aux", "pcie_bus";
> + assigned-clocks = <&clk IMX8MM_CLK_PCIE1_AUX>,
> + <&clk IMX8MM_CLK_PCIE1_CTRL>;
> + assigned-clock-rates = <10000000>, <250000000>;
> + assigned-clock-parents = <&clk IMX8MM_SYS_PLL2_50M>,
> + <&clk IMX8MM_SYS_PLL2_250M>;
> + status = "okay";
> +};
> +
> +&pgc_mipi {
> + status = "disabled";
> +};
> +
> +/* off-board RS232 */
> +&uart1 {
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_uart1>;
> + status = "okay";
> +};
> +
> +/* console */
> +&uart2 {
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_uart2>;
> + status = "okay";
> +};
> +
> +/* off-board RS232 */
> +&uart3 {
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_uart3>;
> + status = "okay";
> +};
> +
> +&usbotg1 {
> + dr_mode = "host";
> + disable-over-current;
> + status = "okay";
> +};
> +
> +/* microSD */
> +&usdhc2 {
> + pinctrl-names = "default", "state_100mhz", "state_200mhz";
> + pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>;
> + pinctrl-1 = <&pinctrl_usdhc2_100mhz>, <&pinctrl_usdhc2_gpio>;
> + pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_gpio>;
> + cd-gpios = <&gpio2 12 GPIO_ACTIVE_LOW>;
> + bus-width = <4>;
> + vmmc-supply = <®_3p3v>;
> + status = "okay";
> +};
> +
> +/* eMMC */
> +&usdhc3 {
> + pinctrl-names = "default", "state_100mhz", "state_200mhz";
> + pinctrl-0 = <&pinctrl_usdhc3>;
> + pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
> + pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
> + bus-width = <8>;
> + non-removable;
> + status = "okay";
> +};
> +
> +&wdog1 {
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_wdog>;
> + fsl,ext-reset-output;
> + status = "okay";
> +};
> +
> +&iomuxc {
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_hog>;
> +
> + pinctrl_hog: hoggrp {
> + fsl,pins = <
> + MX8MM_IOMUXC_GPIO1_IO12_GPIO1_IO12 0x40000041 /* RS232# */
> + MX8MM_IOMUXC_ECSPI2_MISO_GPIO5_IO12 0x40000041 /* PCI_WDIS# */
> + >;
> + };
> +
> + pinctrl_accel: accelgrp {
> + fsl,pins = <
> + MX8MM_IOMUXC_GPIO1_IO15_GPIO1_IO15 0x159
> + >;
> + };
> +
> + pinctrl_fec1: fec1grp {
> + fsl,pins = <
> + MX8MM_IOMUXC_ENET_MDC_ENET1_MDC 0x3
> + MX8MM_IOMUXC_ENET_MDIO_ENET1_MDIO 0x3
> + MX8MM_IOMUXC_ENET_TD3_ENET1_RGMII_TD3 0x1f
> + MX8MM_IOMUXC_ENET_TD2_ENET1_RGMII_TD2 0x1f
> + MX8MM_IOMUXC_ENET_TD1_ENET1_RGMII_TD1 0x1f
> + MX8MM_IOMUXC_ENET_TD0_ENET1_RGMII_TD0 0x1f
> + MX8MM_IOMUXC_ENET_RD3_ENET1_RGMII_RD3 0x91
> + MX8MM_IOMUXC_ENET_RD2_ENET1_RGMII_RD2 0x91
> + MX8MM_IOMUXC_ENET_RD1_ENET1_RGMII_RD1 0x91
> + MX8MM_IOMUXC_ENET_RD0_ENET1_RGMII_RD0 0x91
> + MX8MM_IOMUXC_ENET_TXC_ENET1_RGMII_TXC 0x1f
> + MX8MM_IOMUXC_ENET_RXC_ENET1_RGMII_RXC 0x91
> + MX8MM_IOMUXC_ENET_RX_CTL_ENET1_RGMII_RX_CTL 0x91
> + MX8MM_IOMUXC_ENET_TX_CTL_ENET1_RGMII_TX_CTL 0x1f
> + MX8MM_IOMUXC_SAI2_TXFS_GPIO4_IO24 0x19 /* IRQ# */
> + MX8MM_IOMUXC_SAI2_TXC_GPIO4_IO25 0x19 /* RST# */
> + >;
> + };
> +
> + pinctrl_gpio_leds: gpioledsgrp {
> + fsl,pins = <
> + MX8MM_IOMUXC_GPIO1_IO08_GPIO1_IO8 0x40000019
> + MX8MM_IOMUXC_GPIO1_IO09_GPIO1_IO9 0x40000019
> + MX8MM_IOMUXC_GPIO1_IO10_GPIO1_IO10 0x40000019
> + MX8MM_IOMUXC_GPIO1_IO11_GPIO1_IO11 0x40000019
> + >;
> + };
> +
> + pinctrl_gsc: gscgrp {
> + fsl,pins = <
> + MX8MM_IOMUXC_SAI2_TXD0_GPIO4_IO26 0x159
> + >;
> + };
> +
> + pinctrl_i2c1: i2c1grp {
> + fsl,pins = <
> + MX8MM_IOMUXC_I2C1_SCL_I2C1_SCL 0x400001c3
> + MX8MM_IOMUXC_I2C1_SDA_I2C1_SDA 0x400001c3
> + >;
> + };
> +
> + pinctrl_i2c2: i2c2grp {
> + fsl,pins = <
> + MX8MM_IOMUXC_I2C2_SCL_I2C2_SCL 0x400001c3
> + MX8MM_IOMUXC_I2C2_SDA_I2C2_SDA 0x400001c3
> + >;
> + };
> +
> + pinctrl_i2c3: i2c3grp {
> + fsl,pins = <
> + MX8MM_IOMUXC_I2C3_SCL_I2C3_SCL 0x400001c3
> + MX8MM_IOMUXC_I2C3_SDA_I2C3_SDA 0x400001c3
> + >;
> + };
> +
> + pinctrl_i2c4: i2c4grp {
> + fsl,pins = <
> + MX8MM_IOMUXC_I2C4_SCL_I2C4_SCL 0x400001c3
> + MX8MM_IOMUXC_I2C4_SDA_I2C4_SDA 0x400001c3
> + >;
> + };
> +
> + pinctrl_pcie0: pciegrp {
> + fsl,pins = <
> + MX8MM_IOMUXC_ECSPI2_MOSI_GPIO5_IO11 0x41
> + >;
> + };
> +
> + pinctrl_pmic: pmicgrp {
> + fsl,pins = <
> + MX8MM_IOMUXC_NAND_DATA02_GPIO3_IO8 0x41
> + >;
> + };
> +
> + pinctrl_uart1: uart1grp {
> + fsl,pins = <
> + MX8MM_IOMUXC_UART1_RXD_UART1_DCE_RX 0x140
> + MX8MM_IOMUXC_UART1_TXD_UART1_DCE_TX 0x140
> + >;
> + };
> +
> + pinctrl_uart2: uart2grp {
> + fsl,pins = <
> + MX8MM_IOMUXC_UART2_RXD_UART2_DCE_RX 0x140
> + MX8MM_IOMUXC_UART2_TXD_UART2_DCE_TX 0x140
> + >;
> + };
> +
> + pinctrl_uart3: uart3grp {
> + fsl,pins = <
> + MX8MM_IOMUXC_UART3_RXD_UART3_DCE_RX 0x140
> + MX8MM_IOMUXC_UART3_TXD_UART3_DCE_TX 0x140
> + >;
> + };
> +
> + pinctrl_usdhc2: usdhc2grp {
> + fsl,pins = <
> + MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK 0x190
> + MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD 0x1d0
> + MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0 0x1d0
> + MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1 0x1d0
> + MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2 0x1d0
> + MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3 0x1d0
> + >;
> + };
> +
> + pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp {
> + fsl,pins = <
> + MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK 0x194
> + MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD 0x1d4
> + MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0 0x1d4
> + MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1 0x1d4
> + MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2 0x1d4
> + MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3 0x1d4
> + >;
> + };
> +
> + pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp {
> + fsl,pins = <
> + MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK 0x196
> + MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD 0x1d6
> + MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0 0x1d6
> + MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1 0x1d6
> + MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2 0x1d6
> + MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3 0x1d6
> + >;
> + };
> +
> + pinctrl_usdhc2_gpio: usdhc2-gpiogrp {
> + fsl,pins = <
> + MX8MM_IOMUXC_SD2_CD_B_GPIO2_IO12 0x1c4
> + MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT 0x1d0
> + >;
> + };
> +
> + pinctrl_usdhc3: usdhc3grp {
> + fsl,pins = <
> + MX8MM_IOMUXC_NAND_WE_B_USDHC3_CLK 0x190
> + MX8MM_IOMUXC_NAND_WP_B_USDHC3_CMD 0x1d0
> + MX8MM_IOMUXC_NAND_DATA04_USDHC3_DATA0 0x1d0
> + MX8MM_IOMUXC_NAND_DATA05_USDHC3_DATA1 0x1d0
> + MX8MM_IOMUXC_NAND_DATA06_USDHC3_DATA2 0x1d0
> + MX8MM_IOMUXC_NAND_DATA07_USDHC3_DATA3 0x1d0
> + MX8MM_IOMUXC_NAND_RE_B_USDHC3_DATA4 0x1d0
> + MX8MM_IOMUXC_NAND_CE2_B_USDHC3_DATA5 0x1d0
> + MX8MM_IOMUXC_NAND_CE3_B_USDHC3_DATA6 0x1d0
> + MX8MM_IOMUXC_NAND_CLE_USDHC3_DATA7 0x1d0
> + MX8MM_IOMUXC_NAND_CE1_B_USDHC3_STROBE 0x190
> + >;
> + };
> +
> + pinctrl_usdhc3_100mhz: usdhc3-100mhzgrp {
> + fsl,pins = <
> + MX8MM_IOMUXC_NAND_WE_B_USDHC3_CLK 0x194
> + MX8MM_IOMUXC_NAND_WP_B_USDHC3_CMD 0x1d4
> + MX8MM_IOMUXC_NAND_DATA04_USDHC3_DATA0 0x1d4
> + MX8MM_IOMUXC_NAND_DATA05_USDHC3_DATA1 0x1d4
> + MX8MM_IOMUXC_NAND_DATA06_USDHC3_DATA2 0x1d4
> + MX8MM_IOMUXC_NAND_DATA07_USDHC3_DATA3 0x1d4
> + MX8MM_IOMUXC_NAND_RE_B_USDHC3_DATA4 0x1d4
> + MX8MM_IOMUXC_NAND_CE2_B_USDHC3_DATA5 0x1d4
> + MX8MM_IOMUXC_NAND_CE3_B_USDHC3_DATA6 0x1d4
> + MX8MM_IOMUXC_NAND_CLE_USDHC3_DATA7 0x1d4
> + MX8MM_IOMUXC_NAND_CE1_B_USDHC3_STROBE 0x194
> + >;
> + };
> +
> + pinctrl_usdhc3_200mhz: usdhc3-200mhzgrp {
> + fsl,pins = <
> + MX8MM_IOMUXC_NAND_WE_B_USDHC3_CLK 0x196
> + MX8MM_IOMUXC_NAND_WP_B_USDHC3_CMD 0x1d6
> + MX8MM_IOMUXC_NAND_DATA04_USDHC3_DATA0 0x1d6
> + MX8MM_IOMUXC_NAND_DATA05_USDHC3_DATA1 0x1d6
> + MX8MM_IOMUXC_NAND_DATA06_USDHC3_DATA2 0x1d6
> + MX8MM_IOMUXC_NAND_DATA07_USDHC3_DATA3 0x1d6
> + MX8MM_IOMUXC_NAND_RE_B_USDHC3_DATA4 0x1d6
> + MX8MM_IOMUXC_NAND_CE2_B_USDHC3_DATA5 0x1d6
> + MX8MM_IOMUXC_NAND_CE3_B_USDHC3_DATA6 0x1d6
> + MX8MM_IOMUXC_NAND_CLE_USDHC3_DATA7 0x1d6
> + MX8MM_IOMUXC_NAND_CE1_B_USDHC3_STROBE 0x196
> + >;
> + };
> +
> + pinctrl_wdog: wdoggrp {
> + fsl,pins = <
> + MX8MM_IOMUXC_GPIO1_IO02_WDOG1_WDOG_B 0xc6
> + >;
> + };
> +};
> --
> 2.25.1
>
